Re: Getmac reports ERROR Provider type not defined.

KM,
I had an image where my netsh setup worked perfectly at the end of FBA. It
had Winlogon (XP Explorer User Interface component) and Explorer Shell. I
changed it to Minlogon and a Custom Shell, but now my static ip config
doesn't work. I didn't have all of these components in my build before, so
how did it work?

Thanks!
MJ

"KM" wrote:

> Make sure that you have the networking driver installed properly and running
> fine. (use devcon or SetupApi.log)
> Or you can use "snetcfg -v -s a" to list installed NICs.
>
> Also, make sure you've got the following components included:
> Network Command Shell
> Network Command Shell Interface Context
> IP Router Monitor Library
> Network Diagnostics
> Remote Access Monitory
> IP Security Services
> Primitive: W32topl
>
>
> KM
>
> > Btw, NETSH Command reports:
> > WARNING: Could not obtain host information from machine XXXXX. Some
> > commands
> > may not be available. Provider type not defined.
> >>netsh
> >
> > Exit command returns command line prompt.
> > When I use netsh at a large build everything goes OK. There must be
> > missing
> > a Component (or Components), which one?
> >
> > V. Pohnetal
> >
> > "V. Pohnetal" wrote:
> >
> >> Well, the goal is to minimize Flash space for System.
> >> I have made some large Builds that run OK on that HW. But now there is
> >> only
> >> one thing I need - to execute a program from Server. I tried to build
> >> system
> >> that consist from MinLogon, TCP/IP Networking, EWF and TCP/IP ARP only.
> >> Getmac was included. When I want to get MAC addresse Getmac reports
> >> ERROR
> >> Provider type not defined.
> >>
> >> Vlastimil
> >>
> >> "KM" wrote:
> >>
> >> > Vlastimil,
> >> >
> >> > >I have Minlogon, TCP/IP Networking, EWF and TCP/IP ARP.
> >> > > Need to enter static IP by ARP.
> >> >
> >> > Could you expand what you want to accomplish?
> >> > If just fix the GetMac problems, please see below.
> >> >
> >> > > Any advice?
> >> >
> >> > Does the network driver got installed and working properly on your
> >> > build?
> >> >
> >> > KM
> >> >
> >> >
> >> >
>
>
>
.

Relevant Pages

  • Re: Getmac reports ERROR Provider type not defined.
    ... Do you use you customer script to work with netsh? ... Just in case you use "Local Area Network" interface name there, make sure to register the name first with command like: ... >> Network Command Shell Interface Context ...
    (microsoft.public.windowsxp.embedded)
  • Re: Netsh- "Incorrect Function" trying to set IP.
    ... - Network Command Shell Interface Context ... KM, BSquare Corp.> I did a search for "netsh, Incorrect function" and I didn't see> anything matching what I'm seeing. ...
    (microsoft.public.windowsxp.embedded)
  • netsh bridge issue
    ... The following command was not found: bridge show adapter. ... Network Command Shell Interface Context ... netsh functionality you require. ...
    (microsoft.public.windowsxp.embedded)
  • Re: Netsh and IPSec Policies
    ... the shell, ... > for the second command the shell is going to assume you're trying to edit ... What you need to do is create a file with ipsec ... then call it from a single netsh command. ...
    (microsoft.public.windows.server.security)
  • Re: Getmac reports ERROR Provider type not defined.
    ... There definitely aren't any problems with the script. ... my shell can't connect to another pc. ... > Do you use you customer script to work with netsh? ... >>> Network Command Shell Interface Context ...
    (microsoft.public.windowsxp.embedded)