Problems to componentize a SATA driver

Hi all,

I want to use a Silicon Image Sil3512 SATA Controller in my XPe image.
Therefor I used the Component Designer to build a component for the mentioned SATA controller.

I got these error messages after processing the inf file:

SiliconImage\WO_Raid\3112A_x86_win_idvr-12057\SI3112.inf: type PNP device INF
Info:Creating: Silicon Image SiI 3512 SATALink Controller
+++ CRITICAL ERROR +++:An error occurred when trying to add a registry resource HKR\ProblemDevices\.
*** Error ***:D:\WinXPe\Driver\SiliconImage\WO_Raid\3112A_x86_win_idvr-12057\SI3112.inf: An error occurred while reading the Service Flags in [SI_3512_XP.Services] section.
Info:Completed processing file [Import succeeded] : D:\WinXPe\Driver\SiliconImage\WO_Raid\3112A_x86_win_idvr-12057\SI3112.inf

Despite the errors I've built an image with this component, the SATA hard disks are working without a problem (till now).

Could I ignore these error messages? Does anybody use the Sil3512 SATA controller and have similar errors?


Thanks
Christian
.

Relevant Pages

  • Re: [SLE] SuSE 9.0 support for SATA sil3114
    ... On Thursday 29 January 2004 03:11 pm, Martin Cordova wrote: ... > Does anyone know where can I find a driver for the ... > SATA controller Silicon Image 3114. ...
    (SuSE)
  • Re: 6.2 & Strange HDD problem
    ... chip, a silicon image 3512, seems to be very badly supported by ... freebsd, although supported... ... At this point I'm sure at 90% the problem is sata controller chip... ...
    (comp.unix.bsd.freebsd.misc)
  • Re: Silicon Image SATA controller problems
    ... WinXP Pro (fresh install on single hard drive, ... > SATA Controller: Silicon Image 3112 ...
    (microsoft.public.windowsxp.hardware)
  • "qc timeout" error in sata_sil 3114 driver, 2.6.18
    ... I'm working on a new PowerPC board with a Silicon Image 3114 SATA controller ... When the sata_sil driver loads and tries to find the device, ...
    (Linux-Kernel)
Loading