I build a XPe image for realtime encoder. When I connect SONY DV with 1394 port. The system pop-up the Found New Hardware Wizard. I test in Windows XP
professional. I don't need to setup any driver. Can you tell me what the
components I loss? Thank you very much.
Re: Failure To Recognize DV Camera ... The Sony DVC is a known working device. ... the Firewire port so I wouldn't have found out that it was faulty. ... While I have never had a Firewire port go bad I have had USB ports have ...connection was made but if I released the connector the connection would ... (microsoft.public.windowsxp.moviemaker)
Re: Failure To Recognize DV Camera ... since the Sony DVC is recognized by another WinXP ...Firewire port so I wouldn't have found out that it was faulty. ...connection was made but if I released the connector the connection would ... (microsoft.public.windowsxp.moviemaker)
Re: A simple question about video capture ... I think you might not recognize the 1394 - Firewire port on your Sony.... as recording/playing Digital with Video8/Hi8 tapes.... (rec.video.desktop)
Re: HP DeskJet 940c ... there is no yellow circle....hardware wizard starts it tries to install my printer, ...port is unknown. ... When I try to install the ... (microsoft.public.windowsxp.print_fax)
Re: USB Flash Memory Stick Driver ... try plugging in a hub which is self powered (ie plugged ... > into the wall) and then pluggin the pny flash stick into that. ... >> I tried my Sony stick in the same port and the Sony works fine. ... (microsoft.public.development.device.drivers)
