Re: IRDA support
- From: "John Chen" <DT@xxxxxxxxxxxxxxxx>
- Date: Thu, 26 May 2005 13:39:50 -0700
I have not solved this issue yet, got interrutpted by some high priority
stuff.
Thanks for your valuable input, will try it here.
Regards,
John
"Tony Guan" <tony@xxxxxxxxxxxxx> wrote in message
news:OhJS$3PYFHA.3712@xxxxxxxxxxxxxxxxxxxxxxx
> OK, I found the root cause here.
> This problem occurs because of a race condition that occurs at startup
> between the Irmon service and the Winlogon service. This problem is
> known to occur with certain portable computers.
>
> We have experimented it out, and microsoft has admited it, please view
> the following link for details:
> http://support.microsoft.com/?kbid=885855
>
>
>
> --
> BRGs
> Tony Guan
>
> First International Computer ShangHai Software Lab.
> Add: Garden Business Center,889 JuLu Rd,ShangHai,P.R.C.
> Tel: +86-21-62495726 Ext: 223
> Fax: +86-21-62495712
> "Tony Guan" <tony@xxxxxxxxxxxxx>
> дÈëÏûÏ¢ÐÂÎÅ:%23r%23bLmDYFHA.712@xxxxxxxxxxxxxxxxxxxxxxx
>> Dear John,
>>
>> Did you resolved your problem?
>> I met the same one with you. And I am using the same irda hardware!
>> Please help me out if you succeed.
>>
>> My symptom is that when I uninstall the "ALi Fast Infrared Controller"
>> from the Device manager, and reboot, it will show the icon and connect to
>> host pc smoothly.
>> But when rebooted, everything roll back to the failure condition.
>>
>> Great thanks!
>>
>> --
>> BRGs
>> Tony Guan
>>
>>
>> "KM" <konstmor@xxxxxxxxxxxxxxxx>
>> ??????:%23HUGLhMNFHA.3784@xxxxxxxxxxxxxxxxxxxxxxx
>> Yong,
>>
>> I don't think you have to replace the "ALi Fast Infrared Controller"
>> component by the one I mentioned if you got that component listed by TAP.
>> You know better what Infrared Controller you've got on your hardware.
>>
>> All you need there is the "irnsc.inf". So make sure the "Infrared
>> Support" component included, which is probably the case since it is a
>> dependency of both components mentioned.
>>
>> If it still does not work you have one of possible issues:
>> - Hardware does not work. Then install XP Pro and make sure it works
>> there.
>> - Problems with driver. Check out \windows\SetupApi.log for more info
>> if this is the case. Also, Device Management or devcon may be helpful to
>> you here.
>> - Problem with shell support of the Irda. What shell do you use? After
>> all try that with XPProEmulation image (www.xpefiles.com).
>>
>> The "Device: Infrared" is just to bring the Infrared Devices class
>> installer.
>>
>> --
>> Regards,
>> KM, BSquare Corp.
>>
>> "John Chen" <john@xxxxxxxxxx> wrote in message
>> news:%23qWZnNLNFHA.1948@xxxxxxxxxxxxxxxxxxxxxxx
>> Hi,
>> I have "ALi Fast Infrared Controller" instead of "IrDA Fast Infrared
>> Port" in my build,
>> And also I do not have "Device: Infrred" in by build, but after I added
>> this in, I do not see any differences.
>> Will those two items make differences to make the IrDA work?
>>
>> I will go ahead and have a try.
>>
>> Thanks,
>> Yong
>>
>>
>> "KM" <konstmor@xxxxxxxxxxxxxxxx> wrote in message
>> news:uVR7mqKNFHA.1104@xxxxxxxxxxxxxxxxxxxxxxx
>>> John,
>>>
>>> You may probably want to check if the following components are in your
>>> image:
>>> "IrDA Fast Infrared Port"
>>> "Netirda Inf"
>>> "Class Installer - Infrared Devices"
>>> "Device: Infrared"
>>> "Infrared Support"
>>>
>>> --
>>> Regards,
>>> KM, BSquare Corp.
>>>
>>>
>>>> Hi All,
>>>> I have trouble to enable IRDA on my XPe device. I believe I have missed
>>>> some
>>>> components.
>>>> The issue is: When my XPe device's IRDA LED is near to my XP based
>>>> notebook
>>>> computer, my notebook computer can sense the IRDA activity, and the IR
>>>> icon
>>>> will be appeared on tray bar, but my XPe device has nothing show up in
>>>> the
>>>> same time.
>>>> I have tested with both embedded IRDA port and an external USB IRDA
>>>> device,
>>>> both of them failed. (I can see wireless link in my control panel
>>>> allowing
>>>> me config the IRDA settings)
>>>>
>>>> Need help to point out what is missing in my build.
>>>>
>>>> Regards,
>>>> Yong
>>>>
>>>>
>>>
>>>
>>
>
>
.
- References:
- Re: IRDA support
- From: Tony Guan
- Re: IRDA support
- From: Tony Guan
- Re: IRDA support
- Prev by Date: Remotely control Audio Volume, how
- Next by Date: Re: Missing processr.sys
- Previous by thread: Re: IRDA support
- Next by thread: Prevent Plug and Play
- Index(es):
Relevant Pages
|
