Re: bootable CD for diskless systems (XPe)
- From: "Slobodan Brcin \(eMVP\)" <sbrcin@xxxxxx>
- Date: Thu, 26 May 2005 15:33:25 +0200
Hi Kulsum,
> Something is really disturbing me . I dont understand these things. Can u
> please make them clear to me.
I will try. Basicaly my steps are different then ones described my MS, and for understanding them you need to know about El-torito
specification and how Reg RAM EWF works. (Too much to be written here :-( )
> 1)I create my run time image added EI-Torito and did auto-resolve.Then
> placed this image in prefba CD.Then i placed the image on my target device
> 1st partition.Then when i run the FBA for the first time run cmd and these
> three commands
Actualy Pre FBA image is not a must to have on CD. But you must have CD that is created from same partition that you will use during
the FBA process. (Once you get CD you can use it as long as you do not repartition your target disk)
> c:\ewfmgr
>
> c:\ewfmgr C:\
>
> c:\etprep /all
What were results of all of these operations?
> But in ur link i saw u were using different commands and sometimes u wrote
> about registry keys.Why have you used different commands and registry editor?
> Is it necessary to do so?
It is not necesary to do, but it is easier procedure on long runs (if you know how to do it). Do not mix procedures that I described
with ones sugested by MS, either follow one or other way to the letter.
> 2)In ur link i saw
>
> NERO usage for El-torito CD creation.
> 1. Select Make Bootable Disk option.
> 2. Select Bootable logical drive option, and select volume with XPe that you
> want to record on El-torito part of CD.
> 3. Go to next step. (Press New.)
> 4. Add files that you want to have on your CD.
> 5. Select recorder->Choose Recorder
> 6. Select Device "Image Recorder" and press OK.
> 7. Choose Burn option and then name file that will receive CD image.
> 8. Use HEX editor and find MBR sector placed by Nero. Go to 1B8 location
> (relative offset from MBR) and type 'ELTO' DiskID on that
> position of hex representation depending on hex editor. You can make a
> simple app that will change this number if you need to
> frequently burn new images.
> 9. From NERO. Choose option Burn image to Disk.
> 10. Choose image file.
> 11. Change back to real recording device driver so you can burn image on CD
> instead to image again.
> 12. Burn image.
>
> when i opened Nero,selected recoder,image record and then pressed ok.After
> this step it ask me for ISO image. Do i need to make one ISO and then use
> NERO to just burn it??
Yes. And in step between you need to patch MBR signature to 'ELTO' this is what my tool does. Without it ISO file is not apropriate
for El-torito drivers. So these four bytes are only reason why you need intermidiary step of making an ISO file.
> Sorry for troubling you so much actually i am in my initial stages and donot
> have much idea abou these things.
NP.
Regards,
Slobodan
> Thanks for your time.
>
> --
> Regards,
> Kulsum
>
>
>
.
- References:
- bootable CD for diskless systems (XPe)
- From: Kulsum
- Re: bootable CD for diskless systems (XPe)
- From: KM
- Re: bootable CD for diskless systems (XPe)
- From: Kulsum
- Re: bootable CD for diskless systems (XPe)
- From: Slobodan Brcin \(eMVP\)
- Re: bootable CD for diskless systems (XPe)
- From: Kulsum
- Re: bootable CD for diskless systems (XPe)
- From: Kulsum
- Re: bootable CD for diskless systems (XPe)
- From: Slobodan Brcin \(eMVP\)
- Re: bootable CD for diskless systems (XPe)
- From: Kulsum
- Re: bootable CD for diskless systems (XPe)
- From: Kulsum
- bootable CD for diskless systems (XPe)
- Prev by Date: Re: XPE Restart and Service shutdown
- Next by Date: Re: bootable CD for diskless systems (XPe)
- Previous by thread: Re: bootable CD for diskless systems (XPe)
- Next by thread: Re: bootable CD for diskless systems (XPe)
- Index(es):
Relevant Pages
|
