Re: PRB - No Network Connections in new image

Tech-Archive recommends: Fix windows errors by optimizing your registry

John,

I am surprised the "Broadcom NetXtreme" adapter didn't work for you.
I got the "Broadcom NetXtreme Gigabit Ethernet" component working on my laptop a while ago. I remember it had just few dependencies
but I must mention my image was quite big.

How did you create you component for the driver? INF import (the b57win32.inf)?
Make sure the driver service data is in FBA resources for that component - it is the key to make it working.

Also, seem like b57xp32.sys was no under DRIVERS in your image. When you were building the image, did you get any build errors?

--
Regards,
KM, BSquare Corp.


> Thanks KM. For my question 1 I am making some progress. I have reviewed the
> SetupApi.log file and found that the driver was not found. I will check to
> see why the driver was not included in the image. I will not had time to
> investigate question 2 further.
>
> The following data is from the setupapi.log
>
> #I022 Found "PCI\VEN_14e4&DEV_1659" in C:\WINDOWS\inf\b57win32.inf; Device:
> "Broadcom NetXtreme Gigabit Ethernet"; Driver: "Broadcom NetXtreme Gigabit
> Ethernet"; Provider: "Broadcom"; Mfg: "Broadcom"; Section name:
> "BCM5750A1.XpInst".
> #I023 Actual install section: [BCM5750A1.XpInst.NTx86]. Rank: 0x00002001.
> Effective driver date: 08/23/2004.
> #-166 Device install function: DIF_SELECTBESTCOMPATDRV.
> #I063 Selected driver installs from section [BCM5750A1.XpInst] in
> "c:\windows\inf\b57win32.inf".
> #I320 Class GUID of device remains: {4D36E972-E325-11CE-BFC1-08002BE10318}.
> #I060 Set selected driver.
> #I058 Selected best compatible driver.
> #-124 Doing copy-only install of
> "PCI\VEN_14E4&DEV_1659&SUBSYS_02C615D9&REV_11\4&117DD1A8&0&0010".
> #-167 SPFILENOTIFY_NEEDMEDIA: Tag = "", Description= "Broadcom NetXtreme
> Installation Media", SourcePath = "c:\windows", SourceFile = "b57xp32.sys",
> Flags = 0x00004000.
> #W170 SPFILENOTIFY_NEEDMEDIA: returned FILEOP_SKIP.
> #-166 Device install function: DIF_REGISTER_COINSTALLERS.
> #I056 Coinstallers registered.
> #-166 Device install function: DIF_INSTALLINTERFACES.
> #-011 Installing section [BCM5750A1.XpInst.NTx86.Interfaces] from
> "c:\windows\inf\b57win32.inf".
> #I054 Interfaces installed.
> #-166 Device install function: DIF_INSTALLDEVICE.
> #I123 Doing full install of
> "PCI\VEN_14E4&DEV_1659&SUBSYS_02C615D9&REV_11\4&117DD1A8&0&0010".
> #-035 Processing service Add/Delete section [BCM5750A1.XpInst.NTx86.Services].
> #E339 Add Service: Binary "C:\WINDOWS\System32\DRIVERS\b57xp32.sys" for
> service "b57w2k" is not present.
> #E032 Error 0xe0000217: A service installation section in this INF is invalid.
> #E275 Error while installing services. Error 0xe0000217: A service
> installation section in this INF is invalid.
> #E122 Device install failed. Error 0xe0000217: A service installation
> section in this INF is invalid.
> #E154 Class installer failed. Error 0xe0000217: A service installation
> section in this INF is invalid.
> #I060 Set selected driver.
> #I125 Installing NULL driver for
> "PCI\VEN_14E4&DEV_1659&SUBSYS_02C615D9&REV_11\4&117DD1A8&0&0010".
> #E122 Device install failed. Error 0xe0000219: The installation failed
> because a function driver was not specified for this device instance.
> #I125 Installing NULL driver for
> "PCI\VEN_14E4&DEV_1659&SUBSYS_02C615D9&REV_11\4&117DD1A8&0&0010".
>
>
> "KM" wrote:
>
> > John,
> >
> > 1) You should check if the network adapter driver got installed properly.
> > Use Device Manager GUI or devcon command line tool (http://support.microsoft.com/default.aspx?scid=kb;en-us;311272).
> > Also, you will find the driver installation info in \windows\SetupApi.log file. (you can post it here if you'd like to. Use OE
and
> > post the file as attachment).
> >
> > 2) IIRC, "Standard Start Menu Shortcuts" component will have those links for Stat Menu\Administrative Tools. That should fix the
> > same links under Control Panel\Administrative Tools namespace.
> >
> > --
> > Regards,
> > KM, BSquare Corp.
> >
> >
> > > I am new to building Windows XP embedded images, in fact this is my first
> > > attempt. I have 2 questions.
> > >
> > > 1)
> > > I have an image that completes FBA successfully and boots cleanly. When I
> > > open Control Panel -> Network Connections there are no connections. I have
> > > added the hardware and software components to the image for the Braodcom NIC
> > > that is on the motherboard. I have added all the TCP/IP and other network
> > > components that I think might be needed but still I have no network adapters.
> > > I started the configuration by executing TAP on my target hardware
> > > (SuperMicro X6DAL-TB2), imported the pmq file to Target Designer, resolved
> > > all discrepancies, imported to Component Designer additional INF files to
> > > create additional needed components specific to the hardare platform, added
> > > the new components to the Component Database Manager, and added the new
> > > platform specific components to my Target Designer configuration. Can somone
> > > suggest what I need to look for to determine why there are no active network
> > > adapters in my system. Is there a setting I have missed? Do I not have the
> > > correct network adapter driver support component?
> > >
> > > 2)
> > > Control Panel -> Administrator Tools does not have a link to Computer
> > > Management. What component can I add or what setting do I change to get
> > > access to Computer Management.
> > >
> > > Thanks in advance.
> > > --
> > > John
> >
> >
> >


.

Relevant Pages

  • Re: URGENT: Strange problem during installation a device drivers
    ... deleted that oem*.inf/pnf files, rebooted and selected my inf from the ... beginning, the installation faile the same way, driver coping while the ... debice reboots with another VID/PID and asks for another driver. ...
    (microsoft.public.development.device.drivers)
  • Re: "Unknown Device" problem with the wrong device id
    ... ports) and i'm using Santana802.11g usb wireless adapter it ... just worked so fine and driver's installation was so smooth but i'm sick ... to install the driver like 360 times so that the windows really recognize ...
    (microsoft.public.windowsxp.hardware)
  • Re: Maxtor SATA Primary & WinXP...Wont install...
    ... That's how I managed to "misplace" the driver cd & manual for my brand ... It's an ASUS P4S800D-X + my hubby bought me a new MAXTOR SATA ... "Setup did not find any hard disk drives installed in your computer. ... Early in the installation of Windows XP you will see a brief message ...
    (microsoft.public.windowsxp.hardware)
  • Re: What registry key to delete to reinstall a device
    ... > I am a newbie in device driver programming and installation. ... the PC will ask for .inf file for driver installation. ... > installation had been saved to registry. ...
    (microsoft.public.development.device.drivers)
  • scsi vhci driver and QLA2310, multi-path
    ... Hello I have installed qla2310 adapter in sunfire with solaris 8. ... the installation of driver for QLA2310 there I can see disks on the ... more than one path to the disk. ... SFS_base_packages.S8.tar.Z in which is vhci driver but it was not ...
    (comp.arch.storage)