Re: embedded turning off hub?
- From: "Slobodan Brcin \(eMVP\)" <sbrcin@xxxxxx>
- Date: Fri, 8 Apr 2005 16:22:37 +0200
Robert,
Windows stops and invalidate all BIOS settings so you should see what
drivers do you miss.
Go to device manager or devcon and check UHCI and EHCI drivers. If you added
manualy support for USB I guess that you forgot to add them.
Standard Enhanched PCI to USB Host Controler.
Standard Universal PCI to USB Host Controler.
Standard OpenHCD PCI to USB Host Controler.
Please analyze or/and send us setupapi.log if you can't make this work.
Regards,
Slobodan
"Robert Dormer" <r.dormer@xxxxxxxxxxxxxxxxx> wrote in message
news:%23paj5REPFHA.248@xxxxxxxxxxxxxxxxxxxxxxx
> Hello all,
>
> After having added USB hub and mass storage drivers to the image I'm
> building, I find that mass storage devices still don't work. Curiously
> enough, they seem to work while the machine is still booting up, but once
> windows appears, they stop. Is there something obvious I'm missing here?
> Does windows muck with any bios settings?
>
> Regards,
> Rob
>
>
.
- Follow-Ups:
- Re: embedded turning off hub?
- From: Robert Dormer
- Re: embedded turning off hub?
- References:
- embedded turning off hub?
- From: Robert Dormer
- embedded turning off hub?
- Prev by Date: embedded turning off hub?
- Next by Date: Re: Install scanner
- Previous by thread: embedded turning off hub?
- Next by thread: Re: embedded turning off hub?
- Index(es):
Relevant Pages
|