Re: Asus V9250 magic graphics driver - can't see adaptor in Contro
From: ms (ms_at_discussions.microsoft.com)
Date: 03/01/05
- Next message: Kerwin Cabrera: "Re: Font Component"
- Previous message: RafC: "Re: Newbie question wrt 3rd party device drivers"
- In reply to: KM: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 1 Mar 2005 10:32:56 -0000
Many thanks for all your help KM, much appreciated.
Regards
ms
"KM" <konstmor@nospam_yahoo.com> wrote in message
news:uuGgfjcHFHA.2860@TK2MSFTNGP12.phx.gbl...
> ms,
>
> > Anyway i have one final anomaly. I get an Anvshell.exe - application
> > error upon reboot after successful FBA or manual
> > install through device manager. It seems to be memory type error. I
don't
> > get this error if i use do an install on my
> > image with setup.exe on CD. What is difference between setup.exe and
doing
> > inf install from device manager.
>
> It would depend on how they implemented the setup.exe. Usually it should
not bring much of the differences but who knows.
> As to the error you saw - it must be again a missing dependency issue.
>
> At run time analyze the Anvshell.exe to see if there is anything missing
for the app. (use Dependency Walker/profiling)
> Also, use tools like RegSnap to capture what Setup.exe installs on your
system. Maybe you will see some obviously missing pieces
> right away.
>
> --
> Regards,
> KM, BSquare Corp.
>
>
> > "KM" <konstmor@nospam_yahoo.com> wrote in message
> > news:u%23vNOFQHFHA.2136@TK2MSFTNGP14.phx.gbl...
> > > ms,
> > >
> > > > I did what you advised and driver is not installed so i've missed
some
> > > > driver files. However i relied on inf import to
> > > > highlight which files i need and place in relevant dirs. So this
means
> > inf
> > > > import process is not correct if it is missing
> > >
> > > Not exactly true. INF only lists required files. It does not
necessarily
> > list all the dependencies for the driver.
> > > So, even with INF import you might still have missed some
dependencies.
> > > Dependency Walker (with profiling) will help you there.
> > >
> > > > some files in my component. SOo now i take it i need to manually go
> > > > through the dirs on my target when display
> > > > adapter is correctly installed (using device manager-install) and
> > compare
> > > > with my image or is there an easier way as
> > > > i have hundreds of files to compare.
> > >
> > > Well.. With WinDiff it should be pretty easy to identify missing
files.
> > That shouldn't be thousand files as you basically work with
> > > the same image.
> > >
> > > Regards,
> > > KM
> > >
> > > > "KM" <konstmor@nospam_yahoo.com> wrote in message
> > > > news:%23epEnVLHFHA.580@TK2MSFTNGP15.phx.gbl...
> > > >> ms,
> > > >>
> > > >> > I think i am now further along. As mentioned before now after
> > > > deleting
> > > >> > the Nsvsc key i have the error message
> > > >> > Device cannot start (code 10) in device manager -> cause for
this
> > is
> > > >> > conflicting device list Input/Output range
> > > >> > 03B0-03BB by Via Tech CPU to AGP controller.
> > > >> > Key thing is if i manually install the inf file in device
> > manager->
> > > >> > update driver, driver installs fine and everything works ok so
> > > >>
> > > >> This is good indication indeed.
> > > >> Howewer, when you install the driver through Device Manager you are
> > > > probably asked to browse to the path wher thedriver package or
> > > >> files is located, right?
> > > >> Could it happen that you did not bring all the files from the
package
> > to
> > > > windows directories? I mean if you missed some files when
> > > >> you componentized the driver?
> > > >>
> > > >> Anyway, you can make another quick test. Add you driver component
you
> > > > created to your configuration but disable INF file there. Let
> > > >> FBA run and confirm that the driver was not installed (check with
> > Device
> > > > Manager). Then copy the INf file amnually to \windows\INF
> > > >> and reboot the device. If you see the driver NOT installed after
reboot
> > > > properly, PnP works fine there but you probably missed some
> > > >> driver dependencies.
> > > >>
> > > >> KM
> > > >>
> > > >> > my dependencies should be ok. So problem must be in PNP in
FBA,
> > whats
> > > > the
> > > >> > difference between the FBA install
> > > >> > and manual. I noticed on the manual install the conflicting
> > resource
> > > > has
> > > >> > gone away. I must be close to resolving this now
> > > >> > any ideas to overcome this last hurdle.
> > > >> >
> > > >> > Regards
> > > >> > ms,,
> > > >> >
> > > >> > "KM" <konstmor@nospam_yahoo.com> wrote in message
> > > >> > news:uCKg1wFGFHA.156@TK2MSFTNGP10.phx.gbl...
> > > >> > > ms,
> > > >> > >
> > > >> > > Maybe increasing SetupApi log level may help you to see more
> > > > descriptive
> > > >> > info.
> > > >> > >
> > > >> >
> > > >
> >
http://groups-beta.google.com/group/microsoft.public.windowsxp.embedded/msg/376dbcb0b716ab04
> > > >> > >
> > > >> > > --
> > > >> > > Regards,
> > > >> > > KM, BSquare Corp.
> > > >> > >
> > > >> > >
> > > >> > > > Hi ms,
> > > >> > > >
> > > >> > > > I do not know :-(
> > > >> > > > Have you tried to use dependency walker in XPe to see if
> > nvcpl.dll
> > > > need
> > > >> > some file that is not present?
> > > >> > > > For some reason if refuse to start, I do not know why.
> > > >> > > >
> > > >> > > > BTW: Do you have component in your image named: "Display
Control
> > > > Panel"
> > > >> > > >
> > > >> > > > Regards,
> > > >> > > > Slobodan
> > > >> > > >
> > > >> > > >
> > > >> > > >
> > > >> > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > > >> > news:OjjA0m$FFHA.444@TK2MSFTNGP15.phx.gbl...
> > > >> > > > > Hi Slobodan
> > > >> > > > >
> > > >> > > > > Thanks, its attached now.
> > > >> > > > >
> > > >> > > > > Regards
> > > >> > > > > ms
> > > >> > > > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in message
> > > >> > > > > news:e6twvN6FFHA.1924@TK2MSFTNGP14.phx.gbl...
> > > >> > > > > > Mi ms,
> > > >> > > > > >
> > > >> > > > > > Try compressing it.
> > > >> > > > > >
> > > >> > > > > > Regards,
> > > >> > > > > > Slobodan
> > > >> > > > > >
> > > >> > > > > >
> > > >> > > > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > > >> > > > > news:uPBDYF6FFHA.2692@TK2MSFTNGP10.phx.gbl...
> > > >> > > > > > > Hi Slobodan
> > > >> > > > > > >
> > > >> > > > > > > The server keeps isn't letting me post the
setupapi.log
> > > > file,
> > > >> > says too
> > > >> > > > > > > large -237KB!!! How do i get
> > > >> > > > > > > round this.
> > > >> > > > > > >
> > > >> > > > > > > Regards
> > > >> > > > > > > ms
> > > >> > > > > > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in
message
> > > >> > > > > > > news:%23dKQq35FFHA.1264@TK2MSFTNGP12.phx.gbl...
> > > >> > > > > > > > Hi ms,
> > > >> > > > > > > >
> > > >> > > > > > > > I can't say anything based on these info :-(
> > > >> > > > > > > > Could you give us complete setupapi file again as a
> > > > attachment?
> > > >> > > > > > > >
> > > >> > > > > > > > Also do you have explorer and winlogon?
> > > >> > > > > > > >
> > > >> > > > > > > > > Any idea why the device fails to start,.
> > > >> > > > > > > >
> > > >> > > > > > > > Device fail to start because it is installed trough
inf
> > file
> > > > in
> > > >> > the
> > > >> > > > > same
> > > >> > > > > > > way as service. So when service installation fail
driver
> > > >> > > > > > > > will fail because of it.
> > > >> > > > > > > > Service is not required for video driver to work, but
> > > >> > unfortunately
> > > >> > > > > this
> > > >> > > > > > > mean that you must manually change inf file so that
there
> > > >> > > > > > > > are no references to service.
> > > >> > > > > > > >
> > > >> > > > > > > > Try using dependency walker from XPe on files that
you
> > > > mentioned
> > > >> > in
> > > >> > > > > log
> > > >> > > > > > > bellow and see if they have all dependencies in XPe
image
> > > >> > > > > > > > satisfied.
> > > >> > > > > > > >
> > > >> > > > > > > > Regards,
> > > >> > > > > > > > Slobodan
> > > >> > > > > > > >
> > > >> > > > > > > > PS:
> > > >> > > > > > > > You do not have to delete NVSvc from registry. You
can
> > > > prevent
> > > >> > it from
> > > >> > > > > > > being written in the first place by finding your NVIDIA
> > > >> > > > > > > > component in TD.
> > > >> > > > > > > > Go to component resources and disable all entries
there.
> > > >> > > > > > > >
> > > >> > > > > > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > > >> > > > > > > news:%23O7duj5FFHA.2928@TK2MSFTNGP14.phx.gbl...
> > > >> > > > > > > > > Hi KM, Slobodan
> > > >> > > > > > > > >
> > > >> > > > > > > > > thanks for your help, i'm a bit further along.
I
> > > > deleted
> > > >> > the
> > > >> > > > > > > > > HKLM\SYSTEM\ControlSet001\Services\NVSvc
> > > >> > > > > > > > > key. I now have a different error message :
> > > >> > > > > > > > >
> > > >> > > > > > > > > Installing section [nv4_NV3x.Interfaces] from
> > > >> > > > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > >> > > > > > > > > #I054 Interfaces installed.
> > > >> > > > > > > > > #-166 Device install function: DIF_INSTALLDEVICE.
> > > >> > > > > > > > > #I123 Doing full install of
> > > >> > > > > > > > >
> > > >> > "PCI\VEN_10DE&DEV_0322&SUBSYS_80DF1043&REV_A1\4&9AEDED5&0&0008".
> > > >> > > > > > > > > #-290 Processing REGISTERDLLS section
> > [nv.RegisterShell].
> > > >> > Binary:
> > > >> > > > > > > > > "%11%\nvshell.dll", flags: 0x0001, timeout: 60s.
> > > >> > > > > > > > > #W374 Digital signature verification was skipped
for a
> > > > file
> > > >> > being
> > > >> > > > > > > registered
> > > >> > > > > > > > > ("C:\WINDOWS\System32\nvshell.dll").
> > > >> > > > > > > > > #-290 Processing REGISTERDLLS section
[nv.RegisterCPL].
> > > >> > Binary:
> > > >> > > > > > > > > "%11%\nvcpl.dll", flags: 0x0001, timeout: 60s.
> > > >> > > > > > > > > #W374 Digital signature verification was skipped
for a
> > > > file
> > > >> > being
> > > >> > > > > > > registered
> > > >> > > > > > > > > ("C:\WINDOWS\System32\nvcpl.dll").
> > > >> > > > > > > > > #I163 Device not started: Device has problem: 0x0a:
> > > >> > > > > > > CM_PROB_FAILED_START.
> > > >> > > > > > > > >
> > > >> > > > > > > > > Any idea why the device fails to start,.
> > > >> > > > > > > > >
> > > >> > > > > > > > > Regards
> > > >> > > > > > > > > ms
> > > >> > > > > > > > >
> > > >> > > > > > > > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in
> > message
> > > >> > > > > > > > > news:u%23m%23YXyFFHA.3504@TK2MSFTNGP12.phx.gbl...
> > > >> > > > > > > > > > Hi ms,
> > > >> > > > > > > > > >
> > > >> > > > > > > > > > CurrentControlSet is virtual key that exist only
in
> > > > online
> > > >> > images
> > > >> > > > > it
> > > >> > > > > > > is
> > > >> > > > > > > > > not existent in offline registry.
> > > >> > > > > > > > > > It is usually alias for ControlSet001 so this is
> > where
> > > > you
> > > >> > should
> > > >> > > > > > > look.
> > > >> > > > > > > > > >
> > > >> > > > > > > > > > >
[HKLM\SYSTEM\CurrentControlSet\Services\NVSvc]
> > key
> > > >> > which i
> > > >> > > > > don't
> > > >> > > > > > > have
> > > >> > > > > > > > > in
> > > >> > > > > > > > > > If you do not have
> > > > HKLM\SYSTEM\ControlSet001\Services\NVSvc
> > > >> > then
> > > >> > > > > this
> > > >> > > > > > > is
> > > >> > > > > > > > > good.
> > > >> > > > > > > > > >
> > > >> > > > > > > > > > Registry has nothing to do with dependencies.
> > > >> > > > > > > > > >
> > > >> > > > > > > > > > Regards,
> > > >> > > > > > > > > > Slobodan
> > > >> > > > > > > > > >
> > > >> > > > > > > > > > "ms" <ms@discussions.microsoft.com> wrote in
message
> > > >> > > > > > > > > news:%23GJiNNyFFHA.3824@TK2MSFTNGP10.phx.gbl...
> > > >> > > > > > > > > > > Hi Slobodan,KM
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > > I've been stuck on this for a while now. I
have
> > > > been
> > > >> > using
> > > >> > > > > > > depends to
> > > >> > > > > > > > > > > determine which files are required by dlls and
exe
> > in
> > > >> > > > > > > > > > > my driver. This is a painstaking procedure as
> > there
> > > > are
> > > >> > a lot
> > > >> > > > > of
> > > >> > > > > > > dlls
> > > >> > > > > > > > > and
> > > >> > > > > > > > > > > exe files to open in depends. Anyway i have
been
> > > >> > > > > > > > > > > adding components to my image. Still no
success.
> > > > What i
> > > >> > don't
> > > >> > > > > > > > > understand
> > > >> > > > > > > > > > > is KM said i needed to delete the
> > > >> > > > > > > > > > >
[HKLM\SYSTEM\CurrentControlSet\Services\NVSvc]
> > key
> > > >> > which i
> > > >> > > > > don't
> > > >> > > > > > > have
> > > >> > > > > > > > > in
> > > >> > > > > > > > > > > my pre-FBA image in fact i don't even
> > > >> > > > > > > > > > > have the tree CurrentControlSet\. Slobodan
said
> > in
> > > >> > order to
> > > >> > > > > > > create
> > > >> > > > > > > > > the
> > > >> > > > > > > > > > > key i need the correct depndencies in my image.
> > > >> > > > > > > > > > > This is a contradiction surely as KM is
saying
> > the
> > > >> > presence
> > > >> > > > > of
> > > >> > > > > > > the
> > > >> > > > > > > > > key is
> > > >> > > > > > > > > > > causing a problem and Slobodan saysthe key is
> > > >> > > > > > > > > > > only created on successful install which
hasn't
> > > >> > happened.
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > > Error was Installing section
> > [nv4_NV3x.Interfaces]
> > > > from
> > > >> > > > > > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > >> > > > > > > > > > > #I054 Interfaces installed.
> > > >> > > > > > > > > > > #-166 Device install function:
DIF_INSTALLDEVICE.
> > > >> > > > > > > > > > > #-035 Processing service Add/Delete section
> > > >> > [nv4_NV3x.Services].
> > > >> > > > > > > > > > > #E281 Add Service: Failed to modify existing
> > service
> > > >> > "NVSvc".
> > > >> > > > > Error
> > > >> > > > > > > 2:
> > > >> > > > > > > > > The
> > > >> > > > > > > > > > > system cannot find the file specified.
> > > >> > > > > > > > > > > #E033 Error 2: The system cannot find the file
> > > > specified.
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > > I've atached my setupapi.log and system.sav
> > pre-fba
> > > > hive
> > > >> > file.
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > > Regards
> > > >> > > > > > > > > > > ms
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote
in
> > > > message
> > > >> > > > > > > > > > > news:%23ksdpMtEFHA.1524@TK2MSFTNGP09.phx.gbl...
> > > >> > > > > > > > > > > > ms,
> > > >> > > > > > > > > > > >
> > > >> > > > > > > > > > > > This key will be created during the
successful
> > FBA
> > > > PnP
> > > >> > install
> > > >> > > > > > > based
> > > >> > > > > > > > > on
> > > >> > > > > > > > > > > driver inf file.
> > > >> > > > > > > > > > > > For this to succeed you must have all help
files
> > > > present
> > > >> > and
> > > >> > > > > other
> > > >> > > > > > > > > files
> > > >> > > > > > > > > > > needed for NVIDIA files and services to work.
> > > >> > > > > > > > > > > > Use Dependency walker to see what files are
> > required
> > > > by
> > > >> > each
> > > >> > > > > > > NVIDIA
> > > >> > > > > > > > > dll,
> > > >> > > > > > > > > > > exe file and include appropriate components in
your
> > > > image.
> > > >> > > > > > > > > > > >
> > > >> > > > > > > > > > > > Regards,
> > > >> > > > > > > > > > > > Slobodan
> > > >> > > > > > > > > > > >
> > > >> > > > > > > > > > > > "ms" <ms@discussions.microsoft.com> wrote in
> > message
> > > >> > > > > > > > > > > news:enp2PKqEFHA.2572@tk2msftngp13.phx.gbl...
> > > >> > > > > > > > > > > > > Hi KM
> > > >> > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > I loaded hive for preFBA image but there
is
> > no
> > > > key
> > > >> > > > > > > > > > > > >
HKLM\SYSTEM\CurrentControlSet\Services\NVSvc.
> > When
> > > > i
> > > >> > loaded
> > > >> > > > > > > > > > > > > hive it asked for name and i entered test.
> > Then
> > > > only
> > > >> > key
> > > >> > > > > was
> > > >> > > > > > > > > > > > > HKLM\test\ControlSet001\Services\nv\Video\
> > There
> > > > was
> > > >> > a key
> > > >> > > > > > > > > > > > > here which i deleted but didn't make any
> > > > difference.
> > > >> > I've
> > > >> > > > > also
> > > >> > > > > > > > > copied
> > > >> > > > > > > > > > > hlp
> > > >> > > > > > > > > > > > > files into my image but again no diff,
still
> > same
> > > >> > error
> > > >> > > > > > > > > > > > > message. I suppose i need to work out why
i
> > can't
> > > > see
> > > >> > the
> > > >> > > > > key
> > > >> > > > > > > you
> > > >> > > > > > > > > asked
> > > >> > > > > > > > > > > me
> > > >> > > > > > > > > > > > > to delete.
> > > >> > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > Regards
> > > >> > > > > > > > > > > > > ms
> > > >> > > > > > > > > > > > > "KM" <konstmor@nospam_yahoo.com> wrote in
> > message
> > > >> > > > > > > > > > > > >
news:%23blTNvtDFHA.2608@TK2MSFTNGP10.phx.gbl...
> > > >> > > > > > > > > > > > > > Or you can use the same imported
component
> > and
> > > > add
> > > >> > > > > Registry
> > > >> > > > > > > Delete
> > > >> > > > > > > > > Key
> > > >> > > > > > > > > > > > > resource to your component or TD Extra
Registry
> > > >> > section.
> > > >> > > > > > > > > > > > > > You just have to delete
> > > >> > > > > > > > > [HKLM\SYSTEM\CurrentControlSet\Services\NVSvc]
> > > >> > > > > > > > > > > > > key.
> > > >> > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > For the help files please uncheck "Do not
> > copy
> > > > help
> > > >> > files
> > > >> > > > > for
> > > >> > > > > > > this
> > > >> > > > > > > > > > > > > component" on your component's Settings
page in
> > > > TD.
> > > >> > And
> > > >> > > > > uncheck
> > > >> > > > > > > > > > > > > > "Do not copy help files for this
> > configuration"
> > > >> > > > > configuration
> > > >> > > > > > > > > option
> > > >> > > > > > > > > > > > > (Other Settings).
> > > >> > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > --
> > > >> > > > > > > > > > > > > > Regards,
> > > >> > > > > > > > > > > > > > KM, BSquare Corp.
> > > >> > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > Hi ms,
> > > >> > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > You probably must copy all these hlp
files
> > to
> > > > your
> > > >> > image
> > > >> > > > > as
> > > >> > > > > > > well
> > > >> > > > > > > > > :-(
> > > >> > > > > > > > > > > > > > > Other way would be like I already said
> > manual
> > > >> > cleansing
> > > >> > > > > of
> > > >> > > > > > > inf
> > > >> > > > > > > > > file.
> > > >> > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > Regards,
> > > >> > > > > > > > > > > > > > > Slobodan
> > > >> > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > "ms" <ms@discussions.microsoft.com>
wrote
> > in
> > > >> > message
> > > >> > > > > > > > > > > > >
news:%23y1J8RtDFHA.2180@TK2MSFTNGP10.phx.gbl...
> > > >> > > > > > > > > > > > > > > > Hi Slobodan
> > > >> > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > Thanks for this, it sure is a lot
> > easier
> > > > now.
> > > >> > I've
> > > >> > > > > > > attached
> > > >> > > > > > > > > the
> > > >> > > > > > > > > > > file
> > > >> > > > > > > > > > > > > KM
> > > >> > > > > > > > > > > > > > > > requested.
> > > >> > > > > > > > > > > > > > > > Regards
> > > >> > > > > > > > > > > > > > > > ms
> > > >> > > > > > > > > > > > > > > > "Slobodan Brcin (eMVP)"
<sbrcin@ptt.yu>
> > > > wrote in
> > > >> > > > > message
> > > >> > > > > > > > > > > > > > > >
> > > > news:%23fnyrcsDFHA.1836@tk2msftngp13.phx.gbl...
> > > >> > > > > > > > > > > > > > > > > ms,
> > > >> > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > you can use public MS news server:
> > > >> > > > > news.microsoft.com
> > > >> > > > > > > to
> > > >> > > > > > > > > post
> > > >> > > > > > > > > > > to
> > > >> > > > > > > > > > > > > this NG
> > > >> > > > > > > > > > > > > > > > from outlook express. (Also it is
much
> > > > easier to
> > > >> > > > > monitor
> > > >> > > > > > > > > > > > > > > > > it from there).
> > > >> > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > Regards,
> > > >> > > > > > > > > > > > > > > > > Slobodan
> > > >> > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > "ms" <ms@discussions.microsoft.com>
> > wrote
> > > > in
> > > >> > message
> > > >> > > > > > > > > > > > > > > >
> > > >> > > > > news:B052DA41-C1BF-4EB4-AE25-436336930CAC@microsoft.com...
> > > >> > > > > > > > > > > > > > > > > > Hi KM
> > > >> > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > Lots of components get created
from
> > > > inf
> > > >> > file,
> > > >> > > > > one
> > > >> > > > > > > for
> > > >> > > > > > > > > each
> > > >> > > > > > > > > > > > > version of
> > > >> > > > > > > > > > > > > > > > Asus
> > > >> > > > > > > > > > > > > > > > > > displaycards, i've only used the
> > > > component
> > > >> > > > > > > corresponding
> > > >> > > > > > > > > to my
> > > >> > > > > > > > > > > > > display
> > > >> > > > > > > > > > > > > > > > card
> > > >> > > > > > > > > > > > > > > > > > the V9520 Magic. Any way i am
using
> > > > Internet
> > > >> > > > > Explorer
> > > >> > > > > > > to
> > > >> > > > > > > > > > > read/post
> > > >> > > > > > > > > > > > > to
> > > >> > > > > > > > > > > > > > > > this
> > > >> > > > > > > > > > > > > > > > > > thread, i can't see a way of
> > uploading
> > > > my
> > > >> > inf
> > > >> > > > > file. If
> > > >> > > > > > > you
> > > >> > > > > > > > > > > have an
> > > >> > > > > > > > > > > > > email
> > > >> > > > > > > > > > > > > > > > > > address i'd be happy to send you
it
> > > > direct
> > > >> > if
> > > >> > > > > there is
> > > >> > > > > > > no
> > > >> > > > > > > > > > > other
> > > >> > > > > > > > > > > > > way. I
> > > >> > > > > > > > > > > > > > > > have
> > > >> > > > > > > > > > > > > > > > > > Outlook express on my PC .
> > > >> > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > Regards
> > > >> > > > > > > > > > > > > > > > > > ms
> > > >> > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > "KM" wrote:
> > > >> > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > ms,
> > > >> > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > Was that only component you got
> > from
> > > > the
> > > >> > INF
> > > >> > > > > import
> > > >> > > > > > > and
> > > >> > > > > > > > > > > included
> > > >> > > > > > > > > > > > > in
> > > >> > > > > > > > > > > > > > > > your image?
> > > >> > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > Can you share your INF file
with us
> > > > (just
> > > >> > attach
> > > >> > > > > it
> > > >> > > > > > > to
> > > >> > > > > > > > > your
> > > >> > > > > > > > > > > post
> > > >> > > > > > > > > > > > > if
> > > >> > > > > > > > > > > > > > > > you use OE).
> > > >> > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > --
> > > >> > > > > > > > > > > > > > > > > > > Regards,
> > > >> > > > > > > > > > > > > > > > > > > KM, BSquare Corp.
> > > >> > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > Hi KM,
> > > >> > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > I disabled all Service data
> > > > resources
> > > >> > for my
> > > >> > > > > > > Asus
> > > >> > > > > > > > > V9250
> > > >> > > > > > > > > > > > > component
> > > >> > > > > > > > > > > > > > > > in TD,
> > > >> > > > > > > > > > > > > > > > > > > > there were 4 of them , Asus
> > Driver
> > > >> > helper
> > > >> > > > > service,
> > > >> > > > > > > > > > > asusknbt,
> > > >> > > > > > > > > > > > > nv and
> > > >> > > > > > > > > > > > > > > > ANVIOCTL
> > > >> > > > > > > > > > > > > > > > > > > > but
> > > >> > > > > > > > > > > > > > > > > > > > still got same error in
> > setupapi.log
> > > >> > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > Device install function:
> > > >> > > > > DIF_INSTALLINTERFACES.
> > > >> > > > > > > > > > > > > > > > > > > > #-011 Installing section
> > > >> > [nv4_NV3x.Interfaces]
> > > >> > > > > > > from
> > > >> > > > > > > > > > > > > > > > > > > >
"c:\windows\inf\asusnv2k.inf".
> > > >> > > > > > > > > > > > > > > > > > > > #I054 Interfaces installed.
> > > >> > > > > > > > > > > > > > > > > > > > #-166 Device install
function:
> > > >> > > > > DIF_INSTALLDEVICE.
> > > >> > > > > > > > > > > > > > > > > > > > #-035 Processing service
> > Add/Delete
> > > >> > section
> > > >> > > > > > > > > > > > > [nv4_NV3x.Services].
> > > >> > > > > > > > > > > > > > > > > > > > #E281 Add Service: Failed to
> > modify
> > > >> > existing
> > > >> > > > > > > service
> > > >> > > > > > > > > > > "NVSvc".
> > > >> > > > > > > > > > > > > Error
> > > >> > > > > > > > > > > > > > > > 2: The
> > > >> > > > > > > > > > > > > > > > > > > > system cannot find the file
> > > > specified.
> > > >> > > > > > > > > > > > > > > > > > > > #E033 Error 2: The system
cannot
> > > > find
> > > >> > the file
> > > >> > > > > > > > > specified.
> > > >> > > > > > > > > > > > > > > > > > > > #E275 Error while installing
> > > > services.
> > > >> > Error
> > > >> > > > > 2:
> > > >> > > > > > > The
> > > >> > > > > > > > > system
> > > >> > > > > > > > > > > > > cannot
> > > >> > > > > > > > > > > > > > > > find the
> > > >> > > > > > > > > > > > > > > > > > > > file specified.
> > > >> > > > > > > > > > > > > > > > > > > > #E154 Class installer failed.
> > Error
> > > > 2:
> > > >> > The
> > > >> > > > > system
> > > >> > > > > > > > > cannot
> > > >> > > > > > > > > > > find
> > > >> > > > > > > > > > > > > the
> > > >> > > > > > > > > > > > > > > > file
> > > >> > > > > > > > > > > > > > > > > > > > specified.
> > > >> > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > Regards
> > > >> > > > > > > > > > > > > > > > > > > > ms
> > > >> > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > "KM" wrote:
> > > >> > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > ms,
> > > >> > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > Just load up the built
image
> > > > System
> > > >> > hive
> > > >> > > > > (<your
> > > >> > > > > > > > > image
> > > >> > > > > > > > > > > build
> > > >> > > > > > > > > > > > > > > > dir>\windows\system32\config\system)
with
> > > >> > regedit on
> > > >> > > > > XP
> > > >> > > > > > > Pro
> > > >> > > > > > > > > > > > > > > > > machine
> > > >> > > > > > > > > > > > > > > > > > > and
> > > >> > > > > > > > > > > > > > > > > > > > > delete the mentioned
reg.key,
> > then
> > > >> > unload
> > > >> > > > > the
> > > >> > > > > > > hive.
> > > >> > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > --
> > > >> > > > > > > > > > > > > > > > > > > > > Regards,
> > > >> > > > > > > > > > > > > > > > > > > > > KM, BSquare Corp.
> > > >> > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > Hi KM
> > > >> > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > I know how to disable
> > services
> > > > but
> > > >> > how do
> > > >> > > > > i
> > > >> > > > > > > go
> > > >> > > > > > > > > about
> > > >> > > > > > > > > > > > > deleting a
> > > >> > > > > > > > > > > > > > > > registry
> > > >> > > > > > > > > > > > > > > > > > > > > > entry in Pre-FBA image.
> > > >> > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > Regards
> > > >> > > > > > > > > > > > > > > > > > > > > > ms
> > > >> > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > ms,
> > > >> > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > Either:
> > > >> > > > > > > > > > > > > > > > > > > > > > > - delete
> > > >> > > > > > > > > > > > >
[HKLM\SYSTEM\CurrentControlSer\Services\nvsvc]
> > > >> > > > > > > > > > > > > > > > registry in pre-FBA image offline
before
> > you
> > > >> > deploy it
> > > >> > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > or
> > > >> > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > - disable Service
Data
> > > >> > Resources for
> > > >> > > > > the
> > > >> > > > > > > > > > > services in
> > > >> > > > > > > > > > > > > the
> > > >> > > > > > > > > > > > > > > > component you got from the inf import
> > > >> > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > --
> > > >> > > > > > > > > > > > > > > > > > > > > > > Regards,
> > > >> > > > > > > > > > > > > > > > > > > > > > > KM, BSquare
Corp.
> > > >> > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > > Hi,
> > > >> > > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > > I have created a
> > component
> > > > for
> > > >> > my
> > > >> > > > > Asus
> > > >> > > > > > > V9250
> > > >> > > > > > > > > > > > > graphics card
> > > >> > > > > > > > > > > > > > > > using the inf
> > > >> > > > > > > > > > > > > > > > > > > > > > > > file on the driver
CD. I
> > > > have
> > > >> > created
> > > >> > > > > a
> > > >> > > > > > > > > repository
> > > >> > > > > > > > > > > and
> > > >> > > > > > > > > > > > > > > > included all files.
> > > >> > > > > > > > > > > > > > > > > > > > > > > > Added component to my
> > image
> > > >> > which has
> > > >> > > > > no
> > > >> > > > > > > > > errors.
> > > >> > > > > > > > > > > After
> > > >> > > > > > > > > > > > > FBA
> > > >> > > > > > > > > > > > > > > > when i go into
> > > >> > > > > > > > > > > > > > > > > > > > > > > > Control Panel ->
Display
> > > >> > settings i
> > > >> > > > > see no
> > > >> > > > > > > > > > > settings
> > > >> > > > > > > > > > > > > for my
> > > >> > > > > > > > > > > > > > > > graphics card. I
> > > >> > > > > > > > > > > > > > > > > > > > > > > > have included PNP
(user)
> > and
> > > >> > class
> > > >> > > > > > > installer -
> > > >> > > > > > > > > > > display
> > > >> > > > > > > > > > > > > > > > adaptors. In
> > > >> > > > > > > > > > > > > > > > > > > > > > > > Fbalog.txt i have the
> > > > following
> > > >> > errors
> > > >> > > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > > 21:58:04 PM -
> > > > [PnpEnumThread:
> > > >> > > > > > > InstallDevice]
> > > >> > > > > > > > > > > > > > > > SetupDiCallClassInstaller
> > > >> > > > > > > > > > > > > > > > > > > > > > > > Error: 0x2, Device:
ASUS
> > > > V9520
> > > >> > Magic
> > > >> > > > > > > v44.03
> > > >> > > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > > also
> > > >> > > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > > 21:44:12 PM -
> > [FBARegQueue:
> > > >> > > > > DllInstall]
> > > >> > > > > > > > > > > > > > > > C:\WINDOWS\System32\eventcls.dll
> > > >> > > > > > > > > > > > > > > > > > > > > > > > (Error: 0x8000ffff)
> > > >> > > > > > > > > > > > > > > > > > > > > > > > 21:44:13 PM -
> > > > [FBARegQueue:
> > > >> > > > > DllInstall]
> > > >> > > > > > > > > > > > > > > > C:\WINDOWS\System32\swprv.dll
> > > >> > > > > > > > > > > > > > > > > > > > > > > > (Error: 0x8000ffff)
> > > >> > > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > > In Setupapilog i have
the
> > > >> > following
> > > >> > > > > > > related
> > > >> > > > > > > > > error
> > > >> > > > > > > > > > > :
> > > >> > > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > > -011 Installing
section
> > > >> > > > > > > [nv4_NV3x.Interfaces]
> > > >> > > > > > > > > from
> > > >> > > > > > > > > > > > > > > > > > > > > > > >
> > > > "c:\windows\inf\asusnv2k.inf".
> > > >> > > > > > > > > > > > > > > > > > > > > > > > #I054 Interfaces
> > installed.
> > > >> > > > > > > > > > > > > > > > > > > > > > > > #-166 Device install
> > > > function:
> > > >> > > > > > > > > DIF_INSTALLDEVICE.
> > > >> > > > > > > > > > > > > > > > > > > > > > > > #-035 Processing
service
> > > >> > Add/Delete
> > > >> > > > > > > section
> > > >> > > > > > > > > > > > > > > > [nv4_NV3x.Services].
> > > >> > > > > > > > > > > > > > > > > > > > > > > > #E281 Add Service:
Failed
> > to
> > > >> > modify
> > > >> > > > > > > existing
> > > >> > > > > > > > > > > service
> > > >> > > > > > > > > > > > > > > > "NVSvc". Error 2: The
> > > >> > > > > > > > > > > > > > > > > > > > > > > > system cannot find
the
> > file
> > > >> > specified.
> > > >> > > > > > > > > > > > > > > > > > > > > > > > #E033 Error 2: The
system
> > > > cannot
> > > >> > find
> > > >> > > > > the
> > > >> > > > > > > file
> > > >> > > > > > > > > > > > > specified.
> > > >> > > > > > > > > > > > > > > > > > > > > > > > #E275 Error while
> > installing
> > > >> > services.
> > > >> > > > > > > Error
> > > >> > > > > > > > > 2:
> > > >> > > > > > > > > > > The
> > > >> > > > > > > > > > > > > system
> > > >> > > > > > > > > > > > > > > > cannot find the
> > > >> > > > > > > > > > > > > > > > > > > > > > > > file specified.
> > > >> > > > > > > > > > > > > > > > > > > > > > > > #E154 Class installer
> > > > failed.
> > > >> > Error 2:
> > > >> > > > > The
> > > >> > > > > > > > > system
> > > >> > > > > > > > > > > > > cannot
> > > >> > > > > > > > > > > > > > > > find the file
> > > >> > > > > > > > > > > > > > > > > > > > > > > > specified.
> > > >> > > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > > Anyone any ideas.
> > > >> > > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > > > Regards
> > > >> > > > > > > > > > > > > > > > > > > > > > > > ms
> > > >> > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > > >
> > > >> > > > > > > > > > > > >
> > > >> > > > > > > > > > > > >
> > > >> > > > > > > > > > > > >
> > > >> > > > > > > > > > > >
> > > >> > > > > > > > > > > >
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > > >
> > > >> > > > > > > > > >
> > > >> > > > > > > > > >
> > > >> > > > > > > > >
> > > >> > > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > > >
> > > >> > > > > > >
> > > >> > > > > > >
> > > >> > > > > >
> > > >> > > > > >
> > > >> > > > >
> > > >> > > > >
> > > >> > > > >
> > > >> > > >
> > > >> > > >
> > > >> > >
> > > >> > >
> > > >> >
> > > >> >
> > > >>
> > > >>
> > > >
> > > >
> > >
> > >
> >
> >
>
>
- Next message: Kerwin Cabrera: "Re: Font Component"
- Previous message: RafC: "Re: Newbie question wrt 3rd party device drivers"
- In reply to: KM: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
|
