Re: Asus V9250 magic graphics driver - can't see adaptor in Contro

From: ms (ms_at_discussions.microsoft.com)
Date: 02/26/05 

Date: Sat, 26 Feb 2005 19:20:36 -0000

Hi KM

   I think i am now further along. As mentioned before now after deleting
the Nsvsc key i have the error message
   Device cannot start (code 10) in device manager -> cause for this is
conflicting device list Input/Output range
   03B0-03BB by Via Tech CPU to AGP controller.
   Key thing is if i manually install the inf file in device manager->
update driver, driver installs fine and everything works ok so
   my dependencies should be ok. So problem must be in PNP in FBA, whats the
difference between the FBA install
   and manual. I noticed on the manual install the conflicting resource has
gone away. I must be close to resolving this now
   any ideas to overcome this last hurdle.

Regards
   ms,,

"KM" <konstmor@nospam_yahoo.com> wrote in message
news:uCKg1wFGFHA.156@TK2MSFTNGP10.phx.gbl...
> ms,
>
> Maybe increasing SetupApi log level may help you to see more descriptive
info.
>
http://groups-beta.google.com/group/microsoft.public.windowsxp.embedded/msg/376dbcb0b716ab04
>
> --
> Regards,
> KM, BSquare Corp.
>
>
> > Hi ms,
> >
> > I do not know :-(
> > Have you tried to use dependency walker in XPe to see if nvcpl.dll need
some file that is not present?
> > For some reason if refuse to start, I do not know why.
> >
> > BTW: Do you have component in your image named: "Display Control Panel"
> >
> > Regards,
> > Slobodan
> >
> >
> >
> > "ms" <ms@discussions.microsoft.com> wrote in message
news:OjjA0m$FFHA.444@TK2MSFTNGP15.phx.gbl...
> > > Hi Slobodan
> > >
> > > Thanks, its attached now.
> > >
> > > Regards
> > > ms
> > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in message
> > > news:e6twvN6FFHA.1924@TK2MSFTNGP14.phx.gbl...
> > > > Mi ms,
> > > >
> > > > Try compressing it.
> > > >
> > > > Regards,
> > > > Slobodan
> > > >
> > > >
> > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > > news:uPBDYF6FFHA.2692@TK2MSFTNGP10.phx.gbl...
> > > > > Hi Slobodan
> > > > >
> > > > > The server keeps isn't letting me post the setupapi.log file,
says too
> > > > > large -237KB!!! How do i get
> > > > > round this.
> > > > >
> > > > > Regards
> > > > > ms
> > > > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in message
> > > > > news:%23dKQq35FFHA.1264@TK2MSFTNGP12.phx.gbl...
> > > > > > Hi ms,
> > > > > >
> > > > > > I can't say anything based on these info :-(
> > > > > > Could you give us complete setupapi file again as a attachment?
> > > > > >
> > > > > > Also do you have explorer and winlogon?
> > > > > >
> > > > > > > Any idea why the device fails to start,.
> > > > > >
> > > > > > Device fail to start because it is installed trough inf file in
the
> > > same
> > > > > way as service. So when service installation fail driver
> > > > > > will fail because of it.
> > > > > > Service is not required for video driver to work, but
unfortunately
> > > this
> > > > > mean that you must manually change inf file so that there
> > > > > > are no references to service.
> > > > > >
> > > > > > Try using dependency walker from XPe on files that you mentioned
in
> > > log
> > > > > bellow and see if they have all dependencies in XPe image
> > > > > > satisfied.
> > > > > >
> > > > > > Regards,
> > > > > > Slobodan
> > > > > >
> > > > > > PS:
> > > > > > You do not have to delete NVSvc from registry. You can prevent
it from
> > > > > being written in the first place by finding your NVIDIA
> > > > > > component in TD.
> > > > > > Go to component resources and disable all entries there.
> > > > > >
> > > > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > > > > news:%23O7duj5FFHA.2928@TK2MSFTNGP14.phx.gbl...
> > > > > > > Hi KM, Slobodan
> > > > > > >
> > > > > > > thanks for your help, i'm a bit further along. I deleted
the
> > > > > > > HKLM\SYSTEM\ControlSet001\Services\NVSvc
> > > > > > > key. I now have a different error message :
> > > > > > >
> > > > > > > Installing section [nv4_NV3x.Interfaces] from
> > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > > > > > #I054 Interfaces installed.
> > > > > > > #-166 Device install function: DIF_INSTALLDEVICE.
> > > > > > > #I123 Doing full install of
> > > > > > >
"PCI\VEN_10DE&DEV_0322&SUBSYS_80DF1043&REV_A1\4&9AEDED5&0&0008".
> > > > > > > #-290 Processing REGISTERDLLS section [nv.RegisterShell].
Binary:
> > > > > > > "%11%\nvshell.dll", flags: 0x0001, timeout: 60s.
> > > > > > > #W374 Digital signature verification was skipped for a file
being
> > > > > registered
> > > > > > > ("C:\WINDOWS\System32\nvshell.dll").
> > > > > > > #-290 Processing REGISTERDLLS section [nv.RegisterCPL].
Binary:
> > > > > > > "%11%\nvcpl.dll", flags: 0x0001, timeout: 60s.
> > > > > > > #W374 Digital signature verification was skipped for a file
being
> > > > > registered
> > > > > > > ("C:\WINDOWS\System32\nvcpl.dll").
> > > > > > > #I163 Device not started: Device has problem: 0x0a:
> > > > > CM_PROB_FAILED_START.
> > > > > > >
> > > > > > > Any idea why the device fails to start,.
> > > > > > >
> > > > > > > Regards
> > > > > > > ms
> > > > > > >
> > > > > > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in message
> > > > > > > news:u%23m%23YXyFFHA.3504@TK2MSFTNGP12.phx.gbl...
> > > > > > > > Hi ms,
> > > > > > > >
> > > > > > > > CurrentControlSet is virtual key that exist only in online
images
> > > it
> > > > > is
> > > > > > > not existent in offline registry.
> > > > > > > > It is usually alias for ControlSet001 so this is where you
should
> > > > > look.
> > > > > > > >
> > > > > > > > > [HKLM\SYSTEM\CurrentControlSet\Services\NVSvc] key
which i
> > > don't
> > > > > have
> > > > > > > in
> > > > > > > > If you do not have HKLM\SYSTEM\ControlSet001\Services\NVSvc
then
> > > this
> > > > > is
> > > > > > > good.
> > > > > > > >
> > > > > > > > Registry has nothing to do with dependencies.
> > > > > > > >
> > > > > > > > Regards,
> > > > > > > > Slobodan
> > > > > > > >
> > > > > > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > > > > > > news:%23GJiNNyFFHA.3824@TK2MSFTNGP10.phx.gbl...
> > > > > > > > > Hi Slobodan,KM
> > > > > > > > >
> > > > > > > > > I've been stuck on this for a while now. I have been
using
> > > > > depends to
> > > > > > > > > determine which files are required by dlls and exe in
> > > > > > > > > my driver. This is a painstaking procedure as there are
a lot
> > > of
> > > > > dlls
> > > > > > > and
> > > > > > > > > exe files to open in depends. Anyway i have been
> > > > > > > > > adding components to my image. Still no success. What i
don't
> > > > > > > understand
> > > > > > > > > is KM said i needed to delete the
> > > > > > > > > [HKLM\SYSTEM\CurrentControlSet\Services\NVSvc] key
which i
> > > don't
> > > > > have
> > > > > > > in
> > > > > > > > > my pre-FBA image in fact i don't even
> > > > > > > > > have the tree CurrentControlSet\. Slobodan said in
order to
> > > > > create
> > > > > > > the
> > > > > > > > > key i need the correct depndencies in my image.
> > > > > > > > > This is a contradiction surely as KM is saying the
presence
> > > of
> > > > > the
> > > > > > > key is
> > > > > > > > > causing a problem and Slobodan saysthe key is
> > > > > > > > > only created on successful install which hasn't
happened.
> > > > > > > > >
> > > > > > > > > Error was Installing section [nv4_NV3x.Interfaces] from
> > > > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > > > > > > > #I054 Interfaces installed.
> > > > > > > > > #-166 Device install function: DIF_INSTALLDEVICE.
> > > > > > > > > #-035 Processing service Add/Delete section
[nv4_NV3x.Services].
> > > > > > > > > #E281 Add Service: Failed to modify existing service
"NVSvc".
> > > Error
> > > > > 2:
> > > > > > > The
> > > > > > > > > system cannot find the file specified.
> > > > > > > > > #E033 Error 2: The system cannot find the file specified.
> > > > > > > > >
> > > > > > > > > I've atached my setupapi.log and system.sav pre-fba hive
file.
> > > > > > > > >
> > > > > > > > > Regards
> > > > > > > > > ms
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in message
> > > > > > > > > news:%23ksdpMtEFHA.1524@TK2MSFTNGP09.phx.gbl...
> > > > > > > > > > ms,
> > > > > > > > > >
> > > > > > > > > > This key will be created during the successful FBA PnP
install
> > > > > based
> > > > > > > on
> > > > > > > > > driver inf file.
> > > > > > > > > > For this to succeed you must have all help files present
and
> > > other
> > > > > > > files
> > > > > > > > > needed for NVIDIA files and services to work.
> > > > > > > > > > Use Dependency walker to see what files are required by
each
> > > > > NVIDIA
> > > > > > > dll,
> > > > > > > > > exe file and include appropriate components in your image.
> > > > > > > > > >
> > > > > > > > > > Regards,
> > > > > > > > > > Slobodan
> > > > > > > > > >
> > > > > > > > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > > > > > > > > news:enp2PKqEFHA.2572@tk2msftngp13.phx.gbl...
> > > > > > > > > > > Hi KM
> > > > > > > > > > >
> > > > > > > > > > > I loaded hive for preFBA image but there is no key
> > > > > > > > > > > HKLM\SYSTEM\CurrentControlSet\Services\NVSvc. When i
loaded
> > > > > > > > > > > hive it asked for name and i entered test. Then only
key
> > > was
> > > > > > > > > > > HKLM\test\ControlSet001\Services\nv\Video\ There was
a key
> > > > > > > > > > > here which i deleted but didn't make any difference.
I've
> > > also
> > > > > > > copied
> > > > > > > > > hlp
> > > > > > > > > > > files into my image but again no diff, still same
error
> > > > > > > > > > > message. I suppose i need to work out why i can't see
the
> > > key
> > > > > you
> > > > > > > asked
> > > > > > > > > me
> > > > > > > > > > > to delete.
> > > > > > > > > > >
> > > > > > > > > > > Regards
> > > > > > > > > > > ms
> > > > > > > > > > > "KM" <konstmor@nospam_yahoo.com> wrote in message
> > > > > > > > > > > news:%23blTNvtDFHA.2608@TK2MSFTNGP10.phx.gbl...
> > > > > > > > > > > > Or you can use the same imported component and add
> > > Registry
> > > > > Delete
> > > > > > > Key
> > > > > > > > > > > resource to your component or TD Extra Registry
section.
> > > > > > > > > > > > You just have to delete
> > > > > > > [HKLM\SYSTEM\CurrentControlSet\Services\NVSvc]
> > > > > > > > > > > key.
> > > > > > > > > > > >
> > > > > > > > > > > > For the help files please uncheck "Do not copy help
files
> > > for
> > > > > this
> > > > > > > > > > > component" on your component's Settings page in TD.
And
> > > uncheck
> > > > > > > > > > > > "Do not copy help files for this configuration"
> > > configuration
> > > > > > > option
> > > > > > > > > > > (Other Settings).
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > Regards,
> > > > > > > > > > > > KM, BSquare Corp.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > > Hi ms,
> > > > > > > > > > > > >
> > > > > > > > > > > > > You probably must copy all these hlp files to your
image
> > > as
> > > > > well
> > > > > > > :-(
> > > > > > > > > > > > > Other way would be like I already said manual
cleansing
> > > of
> > > > > inf
> > > > > > > file.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Regards,
> > > > > > > > > > > > > Slobodan
> > > > > > > > > > > > >
> > > > > > > > > > > > > "ms" <ms@discussions.microsoft.com> wrote in
message
> > > > > > > > > > > news:%23y1J8RtDFHA.2180@TK2MSFTNGP10.phx.gbl...
> > > > > > > > > > > > > > Hi Slobodan
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Thanks for this, it sure is a lot easier now.
I've
> > > > > attached
> > > > > > > the
> > > > > > > > > file
> > > > > > > > > > > KM
> > > > > > > > > > > > > > requested.
> > > > > > > > > > > > > > Regards
> > > > > > > > > > > > > > ms
> > > > > > > > > > > > > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in
> > > message
> > > > > > > > > > > > > > news:%23fnyrcsDFHA.1836@tk2msftngp13.phx.gbl...
> > > > > > > > > > > > > > > ms,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > you can use public MS news server:
> > > news.microsoft.com
> > > > > to
> > > > > > > post
> > > > > > > > > to
> > > > > > > > > > > this NG
> > > > > > > > > > > > > > from outlook express. (Also it is much easier to
> > > monitor
> > > > > > > > > > > > > > > it from there).
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Regards,
> > > > > > > > > > > > > > > Slobodan
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > "ms" <ms@discussions.microsoft.com> wrote in
message
> > > > > > > > > > > > > >
> > > news:B052DA41-C1BF-4EB4-AE25-436336930CAC@microsoft.com...
> > > > > > > > > > > > > > > > Hi KM
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Lots of components get created from inf
file,
> > > one
> > > > > for
> > > > > > > each
> > > > > > > > > > > version of
> > > > > > > > > > > > > > Asus
> > > > > > > > > > > > > > > > displaycards, i've only used the component
> > > > > corresponding
> > > > > > > to my
> > > > > > > > > > > display
> > > > > > > > > > > > > > card
> > > > > > > > > > > > > > > > the V9520 Magic. Any way i am using Internet
> > > Explorer
> > > > > to
> > > > > > > > > read/post
> > > > > > > > > > > to
> > > > > > > > > > > > > > this
> > > > > > > > > > > > > > > > thread, i can't see a way of uploading my
inf
> > > file. If
> > > > > you
> > > > > > > > > have an
> > > > > > > > > > > email
> > > > > > > > > > > > > > > > address i'd be happy to send you it direct
if
> > > there is
> > > > > no
> > > > > > > > > other
> > > > > > > > > > > way. I
> > > > > > > > > > > > > > have
> > > > > > > > > > > > > > > > Outlook express on my PC .
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Regards
> > > > > > > > > > > > > > > > ms
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > "KM" wrote:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > ms,
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Was that only component you got from the
INF
> > > import
> > > > > and
> > > > > > > > > included
> > > > > > > > > > > in
> > > > > > > > > > > > > > your image?
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > Can you share your INF file with us (just
attach
> > > it
> > > > > to
> > > > > > > your
> > > > > > > > > post
> > > > > > > > > > > if
> > > > > > > > > > > > > > you use OE).
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > Regards,
> > > > > > > > > > > > > > > > > KM, BSquare Corp.
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Hi KM,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > I disabled all Service data resources
for my
> > > > > Asus
> > > > > > > V9250
> > > > > > > > > > > component
> > > > > > > > > > > > > > in TD,
> > > > > > > > > > > > > > > > > > there were 4 of them , Asus Driver
helper
> > > service,
> > > > > > > > > asusknbt,
> > > > > > > > > > > nv and
> > > > > > > > > > > > > > ANVIOCTL
> > > > > > > > > > > > > > > > > > but
> > > > > > > > > > > > > > > > > > still got same error in setupapi.log
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Device install function:
> > > DIF_INSTALLINTERFACES.
> > > > > > > > > > > > > > > > > > #-011 Installing section
[nv4_NV3x.Interfaces]
> > > > > from
> > > > > > > > > > > > > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > > > > > > > > > > > > > > > > #I054 Interfaces installed.
> > > > > > > > > > > > > > > > > > #-166 Device install function:
> > > DIF_INSTALLDEVICE.
> > > > > > > > > > > > > > > > > > #-035 Processing service Add/Delete
section
> > > > > > > > > > > [nv4_NV3x.Services].
> > > > > > > > > > > > > > > > > > #E281 Add Service: Failed to modify
existing
> > > > > service
> > > > > > > > > "NVSvc".
> > > > > > > > > > > Error
> > > > > > > > > > > > > > 2: The
> > > > > > > > > > > > > > > > > > system cannot find the file specified.
> > > > > > > > > > > > > > > > > > #E033 Error 2: The system cannot find
the file
> > > > > > > specified.
> > > > > > > > > > > > > > > > > > #E275 Error while installing services.
Error
> > > 2:
> > > > > The
> > > > > > > system
> > > > > > > > > > > cannot
> > > > > > > > > > > > > > find the
> > > > > > > > > > > > > > > > > > file specified.
> > > > > > > > > > > > > > > > > > #E154 Class installer failed. Error 2:
The
> > > system
> > > > > > > cannot
> > > > > > > > > find
> > > > > > > > > > > the
> > > > > > > > > > > > > > file
> > > > > > > > > > > > > > > > > > specified.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Regards
> > > > > > > > > > > > > > > > > > ms
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > "KM" wrote:
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > ms,
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > Just load up the built image System
hive
> > > (<your
> > > > > > > image
> > > > > > > > > build
> > > > > > > > > > > > > > dir>\windows\system32\config\system) with
regedit on
> > > XP
> > > > > Pro
> > > > > > > > > > > > > > > machine
> > > > > > > > > > > > > > > > > and
> > > > > > > > > > > > > > > > > > > delete the mentioned reg.key, then
unload
> > > the
> > > > > hive.
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > > > Regards,
> > > > > > > > > > > > > > > > > > > KM, BSquare Corp.
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > Hi KM
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > I know how to disable services but
how do
> > > i
> > > > > go
> > > > > > > about
> > > > > > > > > > > deleting a
> > > > > > > > > > > > > > registry
> > > > > > > > > > > > > > > > > > > > entry in Pre-FBA image.
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > Regards
> > > > > > > > > > > > > > > > > > > > ms
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > ms,
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > Either:
> > > > > > > > > > > > > > > > > > > > > - delete
> > > > > > > > > > > [HKLM\SYSTEM\CurrentControlSer\Services\nvsvc]
> > > > > > > > > > > > > > registry in pre-FBA image offline before you
deploy it
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > or
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > - disable Service Data
Resources for
> > > the
> > > > > > > > > services in
> > > > > > > > > > > the
> > > > > > > > > > > > > > component you got from the inf import
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > > > > > Regards,
> > > > > > > > > > > > > > > > > > > > > KM, BSquare Corp.
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > Hi,
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > I have created a component for
my
> > > Asus
> > > > > V9250
> > > > > > > > > > > graphics card
> > > > > > > > > > > > > > using the inf
> > > > > > > > > > > > > > > > > > > > > > file on the driver CD. I have
created
> > > a
> > > > > > > repository
> > > > > > > > > and
> > > > > > > > > > > > > > included all files.
> > > > > > > > > > > > > > > > > > > > > > Added component to my image
which has
> > > no
> > > > > > > errors.
> > > > > > > > > After
> > > > > > > > > > > FBA
> > > > > > > > > > > > > > when i go into
> > > > > > > > > > > > > > > > > > > > > > Control Panel -> Display
settings i
> > > see no
> > > > > > > > > settings
> > > > > > > > > > > for my
> > > > > > > > > > > > > > graphics card. I
> > > > > > > > > > > > > > > > > > > > > > have included PNP (user) and
class
> > > > > installer -
> > > > > > > > > display
> > > > > > > > > > > > > > adaptors. In
> > > > > > > > > > > > > > > > > > > > > > Fbalog.txt i have the following
errors
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > 21:58:04 PM - [PnpEnumThread:
> > > > > InstallDevice]
> > > > > > > > > > > > > > SetupDiCallClassInstaller
> > > > > > > > > > > > > > > > > > > > > > Error: 0x2, Device: ASUS V9520
Magic
> > > > > v44.03
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > also
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > 21:44:12 PM - [FBARegQueue:
> > > DllInstall]
> > > > > > > > > > > > > > C:\WINDOWS\System32\eventcls.dll
> > > > > > > > > > > > > > > > > > > > > > (Error: 0x8000ffff)
> > > > > > > > > > > > > > > > > > > > > > 21:44:13 PM - [FBARegQueue:
> > > DllInstall]
> > > > > > > > > > > > > > C:\WINDOWS\System32\swprv.dll
> > > > > > > > > > > > > > > > > > > > > > (Error: 0x8000ffff)
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > In Setupapilog i have the
following
> > > > > related
> > > > > > > error
> > > > > > > > > :
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > -011 Installing section
> > > > > [nv4_NV3x.Interfaces]
> > > > > > > from
> > > > > > > > > > > > > > > > > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > > > > > > > > > > > > > > > > > > > > #I054 Interfaces installed.
> > > > > > > > > > > > > > > > > > > > > > #-166 Device install function:
> > > > > > > DIF_INSTALLDEVICE.
> > > > > > > > > > > > > > > > > > > > > > #-035 Processing service
Add/Delete
> > > > > section
> > > > > > > > > > > > > > [nv4_NV3x.Services].
> > > > > > > > > > > > > > > > > > > > > > #E281 Add Service: Failed to
modify
> > > > > existing
> > > > > > > > > service
> > > > > > > > > > > > > > "NVSvc". Error 2: The
> > > > > > > > > > > > > > > > > > > > > > system cannot find the file
specified.
> > > > > > > > > > > > > > > > > > > > > > #E033 Error 2: The system cannot
find
> > > the
> > > > > file
> > > > > > > > > > > specified.
> > > > > > > > > > > > > > > > > > > > > > #E275 Error while installing
services.
> > > > > Error
> > > > > > > 2:
> > > > > > > > > The
> > > > > > > > > > > system
> > > > > > > > > > > > > > cannot find the
> > > > > > > > > > > > > > > > > > > > > > file specified.
> > > > > > > > > > > > > > > > > > > > > > #E154 Class installer failed.
Error 2:
> > > The
> > > > > > > system
> > > > > > > > > > > cannot
> > > > > > > > > > > > > > find the file
> > > > > > > > > > > > > > > > > > > > > > specified.
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > Anyone any ideas.
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > Regards
> > > > > > > > > > > > > > > > > > > > > > ms
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
>
>

Relevant Pages

  • Re: Security update
    ... Uninstall from the Add/Remove programs and then restart your system.Now try to manually install the update. ...
    (microsoft.public.windows.mediacenter)
  • NewestShareware.com Issue #97
    ... Program Name - Supported Platforms - Type - Category ... Download file size: 2255 K ... all images to your hard drive. ... Simply install the program, create a mailing list, define ...
    (comp.software.shareware.announce)
  • Re: Organization of files
    ... I had to put a 40MB database on a 10MB laptop. ... I was thinking of the problem of adding more images or sound clips. ... fairly difficult if they are resources, ... It was the Install Problem From Hell ...
    (microsoft.public.vc.mfc)
  • Re: Query on databases
    ... Regards, ... > Install the package by specifying the ppd file directly: ... >> ppm> search mysql ... >> Gayatri. ...
    (perl.beginners)
  • Re: Laptop Display Problems
    ... I am trying to install it on an extra laptop that I don't use. ... I suggest you get a copy of Fedora Core 4 or Fedora Core 5 and try that. ... I wasn't even sure what I was supposed to download, ... images or a DVD image. ...
    (Fedora)