Re: Asus V9250 magic graphics driver - can't see adaptor in Contro

From: ms (ms_at_discussions.microsoft.com)
Date: 02/20/05

Next message: KM: "Re: networking in XPe"
Previous message: Slobodan Brcin \(eMVP\): "Re: Development Machine and Target Machine Hardware different"
In reply to: Slobodan Brcin \(eMVP\): "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
Next in thread: KM: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
Reply: KM: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
Reply: Slobodan Brcin \(eMVP\): "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
Messages sorted by: [ date ] [ thread ]

Date: Sun, 20 Feb 2005 08:07:49 -0000

Hi Slobodan,KM

   I've been stuck on this for a while now. I have been using depends to
determine which files are required by dlls and exe in
  my driver. This is a painstaking procedure as there are a lot of dlls and
exe files to open in depends. Anyway i have been
  adding components to my image. Still no success. What i don't understand
is KM said i needed to delete the
   [HKLM\SYSTEM\CurrentControlSet\Services\NVSvc] key which i don't have in
my pre-FBA image in fact i don't even
   have the tree CurrentControlSet\. Slobodan said in order to create the
key i need the correct depndencies in my image.
   This is a contradiction surely as KM is saying the presence of the key is
causing a problem and Slobodan saysthe key is
   only created on successful install which hasn't happened.

Error was Installing section [nv4_NV3x.Interfaces] from
"c:\windows\inf\asusnv2k.inf".
#I054 Interfaces installed.
#-166 Device install function: DIF_INSTALLDEVICE.
#-035 Processing service Add/Delete section [nv4_NV3x.Services].
#E281 Add Service: Failed to modify existing service "NVSvc". Error 2: The
system cannot find the file specified.
#E033 Error 2: The system cannot find the file specified.

I've atached my setupapi.log and system.sav pre-fba hive file.

Regards
ms

"Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in message
news:%23ksdpMtEFHA.1524@TK2MSFTNGP09.phx.gbl...
> ms,
>
> This key will be created during the successful FBA PnP install based on
driver inf file.
> For this to succeed you must have all help files present and other files
needed for NVIDIA files and services to work.
> Use Dependency walker to see what files are required by each NVIDIA dll,
exe file and include appropriate components in your image.
>
> Regards,
> Slobodan
>
> "ms" <ms@discussions.microsoft.com> wrote in message
news:enp2PKqEFHA.2572@tk2msftngp13.phx.gbl...
> > Hi KM
> >
> > I loaded hive for preFBA image but there is no key
> > HKLM\SYSTEM\CurrentControlSet\Services\NVSvc. When i loaded
> > hive it asked for name and i entered test. Then only key was
> > HKLM\test\ControlSet001\Services\nv\Video\ There was a key
> > here which i deleted but didn't make any difference. I've also copied
hlp
> > files into my image but again no diff, still same error
> > message. I suppose i need to work out why i can't see the key you asked
me
> > to delete.
> >
> > Regards
> > ms
> > "KM" <konstmor@nospam_yahoo.com> wrote in message
> > news:%23blTNvtDFHA.2608@TK2MSFTNGP10.phx.gbl...
> > > Or you can use the same imported component and add Registry Delete Key
> > resource to your component or TD Extra Registry section.
> > > You just have to delete [HKLM\SYSTEM\CurrentControlSet\Services\NVSvc]
> > key.
> > >
> > > For the help files please uncheck "Do not copy help files for this
> > component" on your component's Settings page in TD. And uncheck
> > > "Do not copy help files for this configuration" configuration option
> > (Other Settings).
> > >
> > > --
> > > Regards,
> > > KM, BSquare Corp.
> > >
> > >
> > > > Hi ms,
> > > >
> > > > You probably must copy all these hlp files to your image as well :-(
> > > > Other way would be like I already said manual cleansing of inf file.
> > > >
> > > > Regards,
> > > > Slobodan
> > > >
> > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > news:%23y1J8RtDFHA.2180@TK2MSFTNGP10.phx.gbl...
> > > > > Hi Slobodan
> > > > >
> > > > > Thanks for this, it sure is a lot easier now. I've attached the
file
> > KM
> > > > > requested.
> > > > > Regards
> > > > > ms
> > > > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in message
> > > > > news:%23fnyrcsDFHA.1836@tk2msftngp13.phx.gbl...
> > > > > > ms,
> > > > > >
> > > > > > you can use public MS news server: news.microsoft.com to post
to
> > this NG
> > > > > from outlook express. (Also it is much easier to monitor
> > > > > > it from there).
> > > > > >
> > > > > > Regards,
> > > > > > Slobodan
> > > > > >
> > > > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > > > > news:B052DA41-C1BF-4EB4-AE25-436336930CAC@microsoft.com...
> > > > > > > Hi KM
> > > > > > >
> > > > > > > Lots of components get created from inf file, one for each
> > version of
> > > > > Asus
> > > > > > > displaycards, i've only used the component corresponding to my
> > display
> > > > > card
> > > > > > > the V9520 Magic. Any way i am using Internet Explorer to
read/post
> > to
> > > > > this
> > > > > > > thread, i can't see a way of uploading my inf file. If you
have an
> > email
> > > > > > > address i'd be happy to send you it direct if there is no
other
> > way. I
> > > > > have
> > > > > > > Outlook express on my PC .
> > > > > > >
> > > > > > > Regards
> > > > > > > ms
> > > > > > >
> > > > > > > "KM" wrote:
> > > > > > >
> > > > > > > > ms,
> > > > > > > >
> > > > > > > > Was that only component you got from the INF import and
included
> > in
> > > > > your image?
> > > > > > > >
> > > > > > > > Can you share your INF file with us (just attach it to your
post
> > if
> > > > > you use OE).
> > > > > > > >
> > > > > > > > --
> > > > > > > > Regards,
> > > > > > > > KM, BSquare Corp.
> > > > > > > >
> > > > > > > >
> > > > > > > > > Hi KM,
> > > > > > > > >
> > > > > > > > > I disabled all Service data resources for my Asus V9250
> > component
> > > > > in TD,
> > > > > > > > > there were 4 of them , Asus Driver helper service,
asusknbt,
> > nv and
> > > > > ANVIOCTL
> > > > > > > > > but
> > > > > > > > > still got same error in setupapi.log
> > > > > > > > >
> > > > > > > > > Device install function: DIF_INSTALLINTERFACES.
> > > > > > > > > #-011 Installing section [nv4_NV3x.Interfaces] from
> > > > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > > > > > > > #I054 Interfaces installed.
> > > > > > > > > #-166 Device install function: DIF_INSTALLDEVICE.
> > > > > > > > > #-035 Processing service Add/Delete section
> > [nv4_NV3x.Services].
> > > > > > > > > #E281 Add Service: Failed to modify existing service
"NVSvc".
> > Error
> > > > > 2: The
> > > > > > > > > system cannot find the file specified.
> > > > > > > > > #E033 Error 2: The system cannot find the file specified.
> > > > > > > > > #E275 Error while installing services. Error 2: The system
> > cannot
> > > > > find the
> > > > > > > > > file specified.
> > > > > > > > > #E154 Class installer failed. Error 2: The system cannot
find
> > the
> > > > > file
> > > > > > > > > specified.
> > > > > > > > >
> > > > > > > > > Regards
> > > > > > > > > ms
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > "KM" wrote:
> > > > > > > > >
> > > > > > > > > > ms,
> > > > > > > > > >
> > > > > > > > > > Just load up the built image System hive (<your image
build
> > > > > dir>\windows\system32\config\system) with regedit on XP Pro
> > > > > > machine
> > > > > > > > and
> > > > > > > > > > delete the mentioned reg.key, then unload the hive.
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Regards,
> > > > > > > > > > KM, BSquare Corp.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > Hi KM
> > > > > > > > > > >
> > > > > > > > > > > I know how to disable services but how do i go about
> > deleting a
> > > > > registry
> > > > > > > > > > > entry in Pre-FBA image.
> > > > > > > > > > >
> > > > > > > > > > > Regards
> > > > > > > > > > > ms
> > > > > > > > > > >
> > > > > > > > > > > > ms,
> > > > > > > > > > > >
> > > > > > > > > > > > Either:
> > > > > > > > > > > > - delete
> > [HKLM\SYSTEM\CurrentControlSer\Services\nvsvc]
> > > > > registry in pre-FBA image offline before you deploy it
> > > > > > > > > > > >
> > > > > > > > > > > > or
> > > > > > > > > > > >
> > > > > > > > > > > > - disable Service Data Resources for the
services in
> > the
> > > > > component you got from the inf import
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > Regards,
> > > > > > > > > > > > KM, BSquare Corp.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > > Hi,
> > > > > > > > > > > > >
> > > > > > > > > > > > > I have created a component for my Asus V9250
> > graphics card
> > > > > using the inf
> > > > > > > > > > > > > file on the driver CD. I have created a repository
and
> > > > > included all files.
> > > > > > > > > > > > > Added component to my image which has no errors.
After
> > FBA
> > > > > when i go into
> > > > > > > > > > > > > Control Panel -> Display settings i see no
settings
> > for my
> > > > > graphics card. I
> > > > > > > > > > > > > have included PNP (user) and class installer -
display
> > > > > adaptors. In
> > > > > > > > > > > > > Fbalog.txt i have the following errors
> > > > > > > > > > > > >
> > > > > > > > > > > > > 21:58:04 PM - [PnpEnumThread: InstallDevice]
> > > > > SetupDiCallClassInstaller
> > > > > > > > > > > > > Error: 0x2, Device: ASUS V9520 Magic v44.03
> > > > > > > > > > > > >
> > > > > > > > > > > > > also
> > > > > > > > > > > > >
> > > > > > > > > > > > > 21:44:12 PM - [FBARegQueue: DllInstall]
> > > > > C:\WINDOWS\System32\eventcls.dll
> > > > > > > > > > > > > (Error: 0x8000ffff)
> > > > > > > > > > > > > 21:44:13 PM - [FBARegQueue: DllInstall]
> > > > > C:\WINDOWS\System32\swprv.dll
> > > > > > > > > > > > > (Error: 0x8000ffff)
> > > > > > > > > > > > >
> > > > > > > > > > > > > In Setupapilog i have the following related error
:
> > > > > > > > > > > > >
> > > > > > > > > > > > > -011 Installing section [nv4_NV3x.Interfaces] from
> > > > > > > > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > > > > > > > > > > > #I054 Interfaces installed.
> > > > > > > > > > > > > #-166 Device install function: DIF_INSTALLDEVICE.
> > > > > > > > > > > > > #-035 Processing service Add/Delete section
> > > > > [nv4_NV3x.Services].
> > > > > > > > > > > > > #E281 Add Service: Failed to modify existing
service
> > > > > "NVSvc". Error 2: The
> > > > > > > > > > > > > system cannot find the file specified.
> > > > > > > > > > > > > #E033 Error 2: The system cannot find the file
> > specified.
> > > > > > > > > > > > > #E275 Error while installing services. Error 2:
The
> > system
> > > > > cannot find the
> > > > > > > > > > > > > file specified.
> > > > > > > > > > > > > #E154 Class installer failed. Error 2: The system
> > cannot
> > > > > find the file
> > > > > > > > > > > > > specified.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Anyone any ideas.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Regards
> > > > > > > > > > > > > ms
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
> >
>
>

Next message: KM: "Re: networking in XPe"
Previous message: Slobodan Brcin \(eMVP\): "Re: Development Machine and Target Machine Hardware different"
In reply to: Slobodan Brcin \(eMVP\): "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
Next in thread: KM: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
Reply: KM: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
Reply: Slobodan Brcin \(eMVP\): "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
Messages sorted by: [ date ] [ thread ]

Relevant Pages

Re: How to Deploy MFC only based application?
... EXE distribution. ... MFC Extension DLLs if you do static linking. ... Why is running an install package is more complex than a simple copy? ... it to some server configuration. ...
(microsoft.public.vc.mfc)
Wince.net 4.2 USB
... I am faced with a rather odd problem, I have a .exe file (driver for GSM ... card) I manage to connect to our hardware via USB, run the .exe on the PC ... and it starts to install the driver onto our hardware, ...
(microsoft.public.windowsce.platbuilder)
Re: Static Dll vs Shared Dll
... By non-Windows I meant dlls that are not shipped with the OS. ... implementing as either exe + dll, or bigger exe with library code statically ... install", but that wasn't my original claim. ... >>> used as justification for poor programming practice. ...
(microsoft.public.vc.mfc)
Re: Upgrading Video Drivers
... Usually the manufacturers website will also have instructions for using the ... ".exe" installer file. ... panel / add/remove programs" and remove the display driver first. ... It should install without the device wizard. ...
(microsoft.public.windowsxp.help_and_support)
Re: Advice Please
... Using a very basic install package and setting .net security properly, ... shouldn't have to install the dlls on the local machine. ... as a standalone exe file. ... the network and all the users can run the application. ...
(microsoft.public.dotnet.languages.vb)