Re: Asus V9250 magic graphics driver - can't see adaptor in Contro
From: ms (ms_at_discussions.microsoft.com)
Date: 02/14/05
- Next message: ms: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- Previous message: ms: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- In reply to: KM: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- Next in thread: ms: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 14 Feb 2005 08:43:43 -0000
Hi KM
I loaded hive for preFBA image but there is no key
HKLM\SYSTEM\CurrentControlSet\Services\NVSvc. When i loaded
hive it asked for name and i entered test. Then only key was
HKLM\test\ControlSet001\Services\nv\Video\ There was a key
here which i deleted but didn't make any difference. I've also copied hlp
files into my image but again no diff, still same error
message. I suppose i need to work out why i can't see the key you asked me
to delete.
Regards
ms
"KM" <konstmor@nospam_yahoo.com> wrote in message
news:%23blTNvtDFHA.2608@TK2MSFTNGP10.phx.gbl...
> Or you can use the same imported component and add Registry Delete Key
resource to your component or TD Extra Registry section.
> You just have to delete [HKLM\SYSTEM\CurrentControlSet\Services\NVSvc]
key.
>
> For the help files please uncheck "Do not copy help files for this
component" on your component's Settings page in TD. And uncheck
> "Do not copy help files for this configuration" configuration option
(Other Settings).
>
> --
> Regards,
> KM, BSquare Corp.
>
>
> > Hi ms,
> >
> > You probably must copy all these hlp files to your image as well :-(
> > Other way would be like I already said manual cleansing of inf file.
> >
> > Regards,
> > Slobodan
> >
> > "ms" <ms@discussions.microsoft.com> wrote in message
news:%23y1J8RtDFHA.2180@TK2MSFTNGP10.phx.gbl...
> > > Hi Slobodan
> > >
> > > Thanks for this, it sure is a lot easier now. I've attached the file
KM
> > > requested.
> > > Regards
> > > ms
> > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> wrote in message
> > > news:%23fnyrcsDFHA.1836@tk2msftngp13.phx.gbl...
> > > > ms,
> > > >
> > > > you can use public MS news server: news.microsoft.com to post to
this NG
> > > from outlook express. (Also it is much easier to monitor
> > > > it from there).
> > > >
> > > > Regards,
> > > > Slobodan
> > > >
> > > > "ms" <ms@discussions.microsoft.com> wrote in message
> > > news:B052DA41-C1BF-4EB4-AE25-436336930CAC@microsoft.com...
> > > > > Hi KM
> > > > >
> > > > > Lots of components get created from inf file, one for each
version of
> > > Asus
> > > > > displaycards, i've only used the component corresponding to my
display
> > > card
> > > > > the V9520 Magic. Any way i am using Internet Explorer to read/post
to
> > > this
> > > > > thread, i can't see a way of uploading my inf file. If you have an
email
> > > > > address i'd be happy to send you it direct if there is no other
way. I
> > > have
> > > > > Outlook express on my PC .
> > > > >
> > > > > Regards
> > > > > ms
> > > > >
> > > > > "KM" wrote:
> > > > >
> > > > > > ms,
> > > > > >
> > > > > > Was that only component you got from the INF import and included
in
> > > your image?
> > > > > >
> > > > > > Can you share your INF file with us (just attach it to your post
if
> > > you use OE).
> > > > > >
> > > > > > --
> > > > > > Regards,
> > > > > > KM, BSquare Corp.
> > > > > >
> > > > > >
> > > > > > > Hi KM,
> > > > > > >
> > > > > > > I disabled all Service data resources for my Asus V9250
component
> > > in TD,
> > > > > > > there were 4 of them , Asus Driver helper service, asusknbt,
nv and
> > > ANVIOCTL
> > > > > > > but
> > > > > > > still got same error in setupapi.log
> > > > > > >
> > > > > > > Device install function: DIF_INSTALLINTERFACES.
> > > > > > > #-011 Installing section [nv4_NV3x.Interfaces] from
> > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > > > > > #I054 Interfaces installed.
> > > > > > > #-166 Device install function: DIF_INSTALLDEVICE.
> > > > > > > #-035 Processing service Add/Delete section
[nv4_NV3x.Services].
> > > > > > > #E281 Add Service: Failed to modify existing service "NVSvc".
Error
> > > 2: The
> > > > > > > system cannot find the file specified.
> > > > > > > #E033 Error 2: The system cannot find the file specified.
> > > > > > > #E275 Error while installing services. Error 2: The system
cannot
> > > find the
> > > > > > > file specified.
> > > > > > > #E154 Class installer failed. Error 2: The system cannot find
the
> > > file
> > > > > > > specified.
> > > > > > >
> > > > > > > Regards
> > > > > > > ms
> > > > > > >
> > > > > > >
> > > > > > > "KM" wrote:
> > > > > > >
> > > > > > > > ms,
> > > > > > > >
> > > > > > > > Just load up the built image System hive (<your image build
> > > dir>\windows\system32\config\system) with regedit on XP Pro
> > > > machine
> > > > > > and
> > > > > > > > delete the mentioned reg.key, then unload the hive.
> > > > > > > >
> > > > > > > > --
> > > > > > > > Regards,
> > > > > > > > KM, BSquare Corp.
> > > > > > > >
> > > > > > > >
> > > > > > > > > Hi KM
> > > > > > > > >
> > > > > > > > > I know how to disable services but how do i go about
deleting a
> > > registry
> > > > > > > > > entry in Pre-FBA image.
> > > > > > > > >
> > > > > > > > > Regards
> > > > > > > > > ms
> > > > > > > > >
> > > > > > > > > > ms,
> > > > > > > > > >
> > > > > > > > > > Either:
> > > > > > > > > > - delete
[HKLM\SYSTEM\CurrentControlSer\Services\nvsvc]
> > > registry in pre-FBA image offline before you deploy it
> > > > > > > > > >
> > > > > > > > > > or
> > > > > > > > > >
> > > > > > > > > > - disable Service Data Resources for the services in
the
> > > component you got from the inf import
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Regards,
> > > > > > > > > > KM, BSquare Corp.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > > Hi,
> > > > > > > > > > >
> > > > > > > > > > > I have created a component for my Asus V9250
graphics card
> > > using the inf
> > > > > > > > > > > file on the driver CD. I have created a repository and
> > > included all files.
> > > > > > > > > > > Added component to my image which has no errors. After
FBA
> > > when i go into
> > > > > > > > > > > Control Panel -> Display settings i see no settings
for my
> > > graphics card. I
> > > > > > > > > > > have included PNP (user) and class installer - display
> > > adaptors. In
> > > > > > > > > > > Fbalog.txt i have the following errors
> > > > > > > > > > >
> > > > > > > > > > > 21:58:04 PM - [PnpEnumThread: InstallDevice]
> > > SetupDiCallClassInstaller
> > > > > > > > > > > Error: 0x2, Device: ASUS V9520 Magic v44.03
> > > > > > > > > > >
> > > > > > > > > > > also
> > > > > > > > > > >
> > > > > > > > > > > 21:44:12 PM - [FBARegQueue: DllInstall]
> > > C:\WINDOWS\System32\eventcls.dll
> > > > > > > > > > > (Error: 0x8000ffff)
> > > > > > > > > > > 21:44:13 PM - [FBARegQueue: DllInstall]
> > > C:\WINDOWS\System32\swprv.dll
> > > > > > > > > > > (Error: 0x8000ffff)
> > > > > > > > > > >
> > > > > > > > > > > In Setupapilog i have the following related error :
> > > > > > > > > > >
> > > > > > > > > > > -011 Installing section [nv4_NV3x.Interfaces] from
> > > > > > > > > > > "c:\windows\inf\asusnv2k.inf".
> > > > > > > > > > > #I054 Interfaces installed.
> > > > > > > > > > > #-166 Device install function: DIF_INSTALLDEVICE.
> > > > > > > > > > > #-035 Processing service Add/Delete section
> > > [nv4_NV3x.Services].
> > > > > > > > > > > #E281 Add Service: Failed to modify existing service
> > > "NVSvc". Error 2: The
> > > > > > > > > > > system cannot find the file specified.
> > > > > > > > > > > #E033 Error 2: The system cannot find the file
specified.
> > > > > > > > > > > #E275 Error while installing services. Error 2: The
system
> > > cannot find the
> > > > > > > > > > > file specified.
> > > > > > > > > > > #E154 Class installer failed. Error 2: The system
cannot
> > > find the file
> > > > > > > > > > > specified.
> > > > > > > > > > >
> > > > > > > > > > > Anyone any ideas.
> > > > > > > > > > >
> > > > > > > > > > > Regards
> > > > > > > > > > > ms
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
>
>
- Next message: ms: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- Previous message: ms: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- In reply to: KM: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- Next in thread: ms: "Re: Asus V9250 magic graphics driver - can't see adaptor in Contro"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
