Re: PNP + EWF Failed getting protected volume with error 1

From: Slobodan Brcin \(eMVP\) (sbrcin_at_ptt.yu)
Date: 01/25/05 

Date: Tue, 25 Jan 2005 21:17:12 +0100

Hi Dan,

> HKLM\System\MountedDevices) across the platforms.

Not these info but same principle should be used by windows on other registry entries.
Basically partition ID is composed from DiskID (DWORD from MBR) and partition start offset. So HDD model change do not influence
these entries.

My suggestion was that you do not use xcopy but rather ghost or similar copy tools.

Anyhow it is always your call :-)

Regards,
Slobodan

"Dan" <dan@smsolutions.co.nz> wrote in message news:1106683560.723792.240720@c13g2000cwb.googlegroups.com...
> HI Slobodan,
>
> Thanks for the reply. I think I'm going to go with the extra reboot,
> there's a bit of a time restriction here and I don't know 100% that
> your solution will work. The box that the first FBA runs on and the
> actual image are deployed on contain different HDDs. I suspect
> therefore that the volume information will be different (if the volume
> information we're talking about here is to do with:
> HKLM\System\MountedDevices) across the platforms.
>
> Cheers,
>
> Dan
>