Re: Giving a BSOD when running FBA from PCMCIA CF card

From: Kimi Leu (Leu_at_discussions.microsoft.com)
Date: 01/17/05 

Date: Sun, 16 Jan 2005 18:35:01 -0800

Hi! KM and Nick,

Thanks for your help.

To: KM
Our platform can support PCMCIA legacy boot.
We've ever tried to install XP Prof. on a 5GB PCMCIA CF card and boot XP
Prof. from
PCMCIA CF card successfully.

To: Nick
Frankly speaking, I do not have any experience to boot XPe from a USB disk.
Where can I get related information about this way?

KM
01/17/2005
"Nick" wrote:

> hi
> i don't think u can boot from the PCMCIA device easily.
> first, you should add PCMCIA to boot device group. then..., still BSOD,
> i think.
> anyway, the process to booting XPE from PCMCIA disk is just a little
> alike booting from a USB disk.
>
>
> nick
>
>
> "KM" <konstmor@nospam_yahoo.com> wrote in message
> news:OxRTKdF%23EHA.3336@TK2MSFTNGP11.phx.gbl...
> > Kimi,
> >
> >
> http://msdn.microsoft.com/embedded/community/community/tips/xp/stoperr7b/default.aspx
> >
> > Are you able to boot XP Pro on the card?
> > What critical drivers were used to boot XP Pro from the card?
> > Do you have appropriate critical PCMCIA driver in your image?
> >
> > KM
> >
> > > Hi!,
> > >
> > > Our evolution platform is a laptop-like PC.
> > > We creat a XPe image and deploy on a PCMCIA CF card,
> > > but a BSOD happens when running FBA from PCMCIA CF card.
> > >
> > > BSOD detail:
> > > STOP:0x0000007B(0xF7C8E640, 0xC0000034, 0x00000000, 0x000000000)
> > >
> > > This BSOD does not happen if we remove CF card to IDE interface.
> > > Does anyone have a suggestion of what to do next?
> > >
> > > Kimi
> >
> >
>
>
>

Relevant Pages

  • Re: PCI to PCMCIA adapter (Ricoh 5C475 II chipset)
    ... it follows base & offset rule. ... The BIOS is too old to recognize the TI1225 pci card. ... boot on CEPC, it rely on CEPC to configure all the PCI device correctly. ... However, ti1225 based PCMCIA ...
    (microsoft.public.windowsce.embedded)
  • Re: Problems with FC 2 - Touch-pad and PCMCIA Ethernet card
    ... My PCMCIA Ethernet card is configured as NOT TO START ON BOOT. ... The card *should* activate on boot when pcmcia services are started. ... under the network config where you define the IP ...
    (Fedora)
  • Re: Bootable PCMCIA card
    ... I have an XPE iamge that works fine on harddisks, and if I restore it on a PCMCIA card, I am able to boot into Windows if the card is in an adapter which I can then connect to the device via IDE. ... However, if I use the same card and plug it into the PCMCIA slot and try to boot up my device, I get an error while starting Windows. ...
    (microsoft.public.windowsxp.embedded)
  • Re: PCI to PCMCIA adapter (Ricoh 5C475 II chipset)
    ... Ti12250 can not load PCMCIA ... card because resource issue. ... can you posted the call stack when you hit Debug Check? ... > I have tried to modify it but this time I get debugcheck at boot time. ...
    (microsoft.public.windowsce.embedded)
  • Re: Giving a BSOD when running FBA from PCMCIA CF card
    ... > Where can I get related information about this way? ... In this NG you can find some pieces of information related to USB disk boot. ... Also you can get complete XPe boot solution from M-Systems for their uDOC devices. ... > We've ever tried to install XP Prof. on a 5GB PCMCIA CF card and boot XP ...
    (microsoft.public.windowsxp.embedded)