I just installed an HP 2550L post FBA for a client on an XPE Image and every
time I reboot, I receive a problem installing hardware dialog. It's telling
me that there is a section in the INF file not found. The printer works but
this message is annoying every time i boot. Anyone have any answers other
than build a component? I dont want to build a new image as this system is
already in the field.
Problems deploying to FLASH ... If I after finalizing FBA reboot on my C: partition, my XPE image works OK. ... (microsoft.public.windowsxp.embedded)
Headless System Boot Information ... running into some issues with bootup, such that the system will bootup as is ... out of the system while it boots to get a feel for what is causing the reboot.... I had thought that I could get boot information passed over the serial port ... was to load up a VMware session with the XPe image I ... (microsoft.public.windowsxp.embedded)
Working Image corrupting ... I inherited a client that has some XPe embedded stations... It seems like everynow and again a perfectly fine Thin Client will bkue ... utility from Sandisk to mark as non removable. ... of this XPe image put them on consumer grade CF and they are not able to ... (microsoft.public.windowsxp.embedded)
Re: Problems deploying to FLASH ... once after a new profile created). ... Why you don't want to reboot the system after FBA is finished? ... If you want to minimize manual steps, add FBA empty generic command to the late FBA phase that has REBOOT property set to TRUE. ... > If I after finalizing FBA reboot on my C: partition, my XPE image works OK. ... (microsoft.public.windowsxp.embedded)
blue screen after reboot XPe 59 times ... We build a XPe image for a PC hardware based on KM's XPProEmulation.zip. ... but our QA has a test to reboot the machine repeatly by ...Rgds,... (microsoft.public.windowsxp.embedded)
