Re: Error after executing fbreseal.exe; error code: 0x80090006

From: KM (konstmor_at_nospam_yahoo.com)
Date: 12/29/04 

Date: Tue, 28 Dec 2004 21:59:25 -0800

David,

That wouldn't be important what drive letter you assign when you formated the disk (you can even assign no letter there).

But important thing is your disk and partition configuration.

Also, I assume you are talking about your "main" disk that becomes the system parition, right?
How did you format other HDDs that you connect through the extension card? Can you format them with DOS fdisk and remove active flag
from any primary partition on those HDDs?

Regards,
    KM

PS. Btw, I guess you tried that but still.. what happens if you clean up MountedDevices key right after fbreseal and before the
system is shut down?

> Thanks for your guide.
>
> Some of your instructions are already tried.
> 1. Q810144 - already applied
> 2. -keepall switch is also used.
> and I'll get the registry info. and log file that you required, ASAP.
>
> My XPE Image is based on SP1 and all of hotfixs are appied.
>
> AND
> I set a system drive letter 'X:' when I format the HDD, expected the driver
> letter might be changed to 'C:' when it boots up by HDD, and it really does.
> (Because, I use WinPE CD to copy my XPE image and WinPE CD occupied 'C:')
> Does this procedure have related my problem? Can it be a clue for you?
>
> David Gu
>
> "KM" wrote:
>
>> David,
>>
>> I don't have a clue but let's debug the problem a little bit.
>>
>> Some steps you can do:
>> - make sure you have this QFE installed:
>> http://www.microsoft.com/downloads/details.aspx?familyid=6cbe66cb-28d0-49e7-a059-400a7d6059e2&displaylang=en (some more info here
>> http://support.microsoft.com/default.aspx?kbid=810144)
>>
>> - use -keepall switch when you run fbreseal.exe. Make sure fbreseal got self-deleted.
>>
>> - save (export) [HKLM\SYSTEM\MountedDevices] just before the install, then install the card, run fbreseal and power down the
>> device. Open the image system hive offline and save the key content again. Analyze the differences (you can post the file here).
>>
>> - clean up \windows\setupapi.log file just before the IDE card installation. Then analyze the log after you see the error
>> screen
>> (again, please post the file here).
>>
>>
>> Btw, are you building SP1 or SP2 XPe image?
>>
>> KM
>>
>> > KM,
>> >
>> > 1) Install IDE extension card but not use fbreseal.exe? Just reboot (power
>> > up the device).
>> > -> It's OK
>> >
>> > 2) Run the image through FBA with the IDE extension card and HDDs presented?
>> > -> Also OK, but the same error occured after fbreseal.exe
>> >
>> > What's the problem? Help me
>> >
>> > David Gu
>> >
>> >
>> > "KM" wrote:
>> >
>> >> David,
>> >>
>> >> What happens if you:
>> >> 1) Install IDE extension card but not use fbreseal.exe? Just reboot (power up the device).
>> >> 2) Run the image through FBA with the IDE extension card and HDDs presented?
>> >>
>> >> KM
>> >>
>> >> > hi all~
>> >> >
>> >> > I got a big problem using fbreseal.exe.
>> >> >
>> >> > In TD, I added fbreseal component, and set cmiResealPhase 0.
>> >> > After FBA, I installed new IDE extention card, and connected to 4 new
>> >> > HDDs.
>> >> > Finally, running fbreseal.exe, and the system re-boots up, and the
>> >> > error occured.
>> >> >
>> >> > Windows Product Activation:
>> >> > A problem is preventing windows from accurately checking the license
>> >> > for this computer. Error Code: 0x80090006
>> >> >
>> >> > It's not a problem of Boot Partition Setting on TD.
>> >> > (It's already set correctly, 3072MB)
>> >> >
>> >> > If I ran fbreseal.exe without IDE extention card, There is no error.
>> >> > All works is OK.
>> >> >
>> >> > What's the cause of this case?
>>
>>
>>

Relevant Pages

  • Re: WD external drive works with XP, not with Vista
    ... I can now see the drive in Explorer under "Computer", but it's shown as a Removable Disk and claims to have no media.... ... So if I right click on it and try to Open or Format, system tells me there is no disk and to insert one... ... Again I cannot perform any operations on it in Disk management which gives a variety of obscure error messages when I try to format or change drive letter. ... Shows in Computer Management, but no details and cannot perform any operation on it, such as Change Drive Letter or Delete and Create Volume. ...
    (microsoft.public.windows.vista.hardware_devices)
  • Re: Cant Format New Partition in Cluster
    ... just out of curiosity...did you specify a drive letter for it? ... > We are running Server 2003 Enterprise with clustering. ... We recieve Logical Disk ... > Manager Error - the format did not complete successfully. ...
    (microsoft.public.windows.server.clustering)
  • Re: Added second HD - Win XP device mgr shows it working but no drive letter?
    ... have to format it some other way first? ... Management, the second drive shows up in the top pane of the Disk Management screen, correct disk size, but with no drive letter assigned. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: disk manager errors
    ... In order to assign a drive letter you must first create ... a partition and format it. ... Microsoft MVP [Windows] ... in disk manager ...
    (microsoft.public.windows.server.general)
  • Re: conflict of software Nero Recordnow Drivers - or ??
    ... disk package anywhere. ... If Not when Would I format a disk? ... For most normal disc burning projects, music CDs, playable DVDs, Photo CDs, ... I know I did have DLA, On both drives and I was using when asked if I ...
    (microsoft.public.windowsxp.hardware)