networking problem
From: Karoly Vaczko (FM) (karoly.vaczko_at_freemail.hu)
Date: 12/28/04
- Next message: Slobodan Brcin \(eMVP\): "Re: networking problem"
- Previous message: Slobodan Brcin \(eMVP\): "Re: Run-time error '-2147221020 ( 800401e4)'"
- Next in thread: Slobodan Brcin \(eMVP\): "Re: networking problem"
- Reply: Slobodan Brcin \(eMVP\): "Re: networking problem"
- Reply: Karoly Vaczko (FM): "Re: networking problem"
- Reply: KM: "Re: networking problem"
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 28 Dec 2004 21:24:27 +0100
Hello,
I'm facing with a new problem now...
Configuration: my hardware and a shell prototype that I created in
component designer (it is actually a cmd.exe componentized, nothing
more). including components: network command shell, network command
shell interface. Then running auto-resolve created an image that was
able to boot.
FBAlog.txt shows the following interesting:
19:47:53 PM - [FBALaunch] D:\WINDOWS\system32\snetcfg.exe -l
D:\WINDOWS\inf\ndisuio.inf -c p -i MS_NDISUIO (ExitCode: 0x8007000d)
19:47:53 PM - [FBALaunch] D:\WINDOWS\system32\snetcfg.exe -l
D:\WINDOWS\inf\netwzc.inf -c s -i MS_WZCSVC (ExitCode: 0x8007000d)
19:48:09 PM - [FBARegQueue: DllRegisterServer]
D:\WINDOWS\System32\activeds.dll (Error: 0x80040154)
19:48:10 PM - [FBARegQueue: DllInstall]
D:\WINDOWS\System32\userenv.dll (Error: 0x80040154)
After booting into the shell, I managed to start netsh, here is the
screen capture:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
D:\WINDOWS\System32>netsh
WARNING: Could not obtain host information from machine:
[OEM-OGQRQ6TRR00]. Some
commands may not be available.
Class not registered
netsh>interface ip
netsh interface ip>show config
The request is not supported.
netsh interface ip>show ipaddress
The Routing and Remote Access Service is not currently running on the
local mach
ine.
Please use 'net start remoteaccess' on the machine to start the service.
netsh interface ip>show dns
The request is not supported.
netsh interface ip>add address "Local Area Connection" 192.168.2.155
255.255.255
.0
Invalid interface Local Area Connection specified.
netsh interface ip>dump
# ----------------------------------
# Interface IP Configuration
# ----------------------------------
pushd interface ip
popd
# End of interface IP configuration
netsh interface ip>reset d:\resetlog.txt
netsh interface ip>show ipaddress
The Routing and Remote Access Service is not currently running on the
local mach
ine.
Please use 'net start remoteaccess' on the machine to start the service.
netsh interface ip>exit
D:\WINDOWS\System32>net start remoteaccess
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
D:\WINDOWS\System32>
resetlog.txt:
reset
SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\1\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpSubnetMaskOpt
SYSTEM\CurrentControlSet\Services\?\Parameters\Tcpip\DhcpSubnetMaskOpt
reset
SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\3\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpDefaultGateway
SYSTEM\CurrentControlSet\Services\?\Parameters\Tcpip\DhcpDefaultGateway
reset
SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\6\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpNameServer
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DhcpNameServer
reset
SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\15\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\?\DhcpDomain
SYSTEM\CurrentControlSet\Services\TcpIp\Parameters\DhcpDomain
reset
SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\44\RegLocation
old REG_MULTI_SZ =
SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_?\DhcpNameServerList
SYSTEM\CurrentControlSet\Services\NetBT\Adapters\?\DhcpNameServer
reset
SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\Options\46\RegLocation
old REG_SZ =
SYSTEM\CurrentControlSet\Services\NetBT\Parameters\DhcpNodeType
added SYSTEM\CurrentControlSet\Services\Dhcp\Parameters\ServiceDll
added SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DatabasePath
added SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\ForwardBroadcasts
added SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\IpEnableRouter
added SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\NameServer
added
SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Winsock\UseDelayedAcceptance
Failed to load network configuration from the registry. (hr=0x8007000d)
<completed>
What do I miss from the configuration so that the ethernet interface
could be initilaized and the computer will be then "pingable"?
Thanks for your help in advance. I apologize for the long post.
Regards,
Karoly
- Next message: Slobodan Brcin \(eMVP\): "Re: networking problem"
- Previous message: Slobodan Brcin \(eMVP\): "Re: Run-time error '-2147221020 ( 800401e4)'"
- Next in thread: Slobodan Brcin \(eMVP\): "Re: networking problem"
- Reply: Slobodan Brcin \(eMVP\): "Re: networking problem"
- Reply: Karoly Vaczko (FM): "Re: networking problem"
- Reply: KM: "Re: networking problem"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
|
