Re: CD BOOT (El Torito) problem with Intel SE7520 JR2 Main board

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Slobodan Brcin \(eMVP\) (sbrcin_at_ptt.yu)
Date: 11/11/04 

Date: Thu, 11 Nov 2004 15:22:29 +0100

Hi Jay,

Could you give us info where (Position on SCSI, IDE or SATA) was CD-Drive with ELTO CD connected during the FBA? Also what platform
did you use?
Also can you give us here result after BSOD created by windbg when you call: "!devnode 0 1"

Regards.
Slobodan
PS:
If you are using my approach then you must have read the BSOD remark regarding the BIOS problem. (Try updating BIOS)

"Jay" <jayant.pandya@unisys.com> wrote in message news:eodKbI$xEHA.1404@TK2MSFTNGP11.phx.gbl...
> I am having problem booting CD image on Intel SR1400 platform which deploys
> SE7520JR2 main board.
>
> Platform is SCSI based with 3 IDE and SATA interfaces.
> The CD drive used is Toshiba SD R6472 CD/DVD R/W drive. This drive don't
> require special driver for OS other than CD ROM available in the image(
> According to manufacturer specification).
>
> The Image boots OK from SCSI Drive with EWF RAM working ( I am using
> Slobodan's method not to create extra temporary partition on the drive by
> using added registry entries for EWF).
>
> I am creating CD using NERO6 ultra edition first create the drive image use
> Elsigfix.exe to update MBR with ELT signature and then burn CD from that
> image.
>
> The PROBLEM is CD start to boot I get BOOT.ini option menu after that see
> Windows XP Embedded screen and soon after that BSOD with 7B error
> inaccessible boot device.
>
> I have used windbg and checked that PCIIDE driver is loaded but it is the
> last driver that gets loaded and Error occurs soon after that.
>
> Same CD used on another platform which is IDE based boots CD fine.
>
> any suggestions?
>
> Thanks
>
> Jay
>
>

Relevant Pages

  • CD BOOT (El Torito) problem with Intel SE7520 JR2 Main board
    ... Platform is SCSI based with 3 IDE and SATA interfaces. ... Same CD used on another platform which is IDE based boots CD fine. ...
    (microsoft.public.windowsxp.embedded)
  • Still cant boot SCSI with IDE in sequence
    ... My goal is to boot the SCSI as C: ... IDE available as data drive D:. ... when there are no IDE drives. ... boots as C: when it is the first drive on the IDE ...
    (comp.periphs.scsi)
  • Re: install fails
    ... >It's a Gateway ALR8300, with one SCSI drive off an on-board AIC ... >when trying to upgrade to kernel 2.4.19 it boots with the agpgart ... It seems that Gateway installed the cdrom on the primary ide bus ...
    (Debian-User)
  • Re: Loss of SCSI boot after CMOS battery replacement
    ... when there are no IDE drives. ... It also becomes D: when a bootable IDE ... boots as C: when it is the first drive on the IDE ... This configuration bumps the SCSI ...
    (comp.periphs.scsi)
  • Re: Borland DevCon 2006 Tokyo / Mar 3rd.
    ... see a native code IDE from us for Delphi on any other platform than ... Kylix IDE and support for native Linux (and other platform) support is ... For managed code DevCo will have to play catch up game with the vendors ... will not be an exact match for Visual Studio on the Windows ...
    (borland.public.delphi.non-technical)