Re: CMI error after installing the latest QFEs

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Paul A. Lowe (PaulALowe_at_discussions.microsoft.com)
Date: 11/05/04 

Date: Fri, 5 Nov 2004 08:49:02 -0800

Paul
Sorry for not getting right back with you. Have another issue unrelated that
was taking my time. IIS security is not major issue here, network is real
closed up. If I reinstall Q811114, I also get the error again. I think MS
needs to look closer at what is interacting between these updates.
Does anyone out there at MS have a suggestion?
Paul

"Paul Mair" wrote:

> Paul,
> I have tried deleting Q8411114 and Q824151. My system works without errors.
> If I then install Q8411114 I get the problem that the IIS common Lib
> component will not update / cause CMI error. If I install Q824151 (Q8411114
> is uninstalled) the tool reports an error missing IIS Common lib component.
>
> I can build an image with both of these updates removed but the system is
> now vulnerable as the security updates to IIS are no longer in place.
>
> Regards,
> Paul M. Mair
> "Paul A. Lowe" wrote:
>
> > I have performed the delete process on the two QFEs as stated except I did it
> > with 824151, not 824141. Older slx files seem to upgrade fine, I will
> > continue testing and if I see any issues I will post them. However the slx
> > that I had first tried to upgrade and had failed continues to fail. I think I
> > have lost this file. I will build back up to this file level (not hard, I
> > saved in an iterative process). Thank you for all of your help out there. It
> > is nice to know when you have an oops like this there are helpful minds to
> > reach out to. Thanks again.
> >
> > Paul
> >
> > "Joe" wrote:
> >
> > > I also experienced similar behaviour on a new system that I set up from
> > > scratch when I tried to open my .slx which was working properly on the older
> > > system.
> > >
> > > I'll try this recommendation, but don't you mean Q824151 rather than Q824141?
> > >
> > > Joe
> > >
> > > "J. Kremer [MS]" wrote:
> > >
> > > > Paul,
> > > >
> > > > Can you try removing Q811114 and Q824141 from your
> > > > database, and reinstalling Q824141?
> > > >
> > > > I believe what you are seeing might be a result of a
> > > > collision between the updates. (The XPE database version
> > > > of Q824141 actually rolls in all the changes from
> > > > Q811114, so you only need the later update.)
> > > >
> > > > The procedure to remove these from your database is:
> > > > 1. Close all instances of TD or Component Designer that
> > > > are running
> > > > 2. Open Component Database Manager
> > > > 3. Select the "Packages" tab
> > > > 4. Scroll down to find these packages:
> > > > Windows XP Embedded with SP1 QFE Q824141
> > > > Windows XP Embedded with SP1 QFE Q811114
> > > > 5. Delete them
> > > > 6. Reinstall Q824141
> > > >
> > > > If that doesn't do it, let me know and I'll continue
> > > > investigating.
> > > >
> > > > -J
> > > > "This posting is provided "AS IS" with no warranties, and
> > > > confers no rights"
> > > >
> > > >
> > > >
> > > >
> > > > >-----Original Message-----
> > > > >Paul,
> > > > >
> > > > >Thanks for your feedback! We are looking into this issue
> > > > and I will post to
> > > > >the thread when we find an answer.
> > > > >--
> > > > >Lynda
> > > > >
> > > > >"This posting is provided "AS IS" with no warranties,
> > > > and confers no rights"
> > > > >
> > > > >"Paul A. Lowe" <PaulALowe@discussions.microsoft.com>
> > > > wrote in message
> > > > >news:AD6D650A-7080-418D-9533-
> > > > 3FC0C842E00C@microsoft.com...
> > > > >> Slobodan
> > > > >> Thank you for responding. I have seen where you have
> > > > helped many others on
> > > > >> this NG before. I have submitted the bug report.
> > > > >> Do you have any other suggestions?
> > > > >> Paul
> > > > >>
> > > > >>
> > > > >>
> > > > >> "Paul Mair" wrote:
> > > > >>
> > > > >>> An update to this problem. I believe the problem
> > > > occured when installing
> > > > >>> QFE
> > > > >>> Q824151.
> > > > >>>
> > > > >>> "Slobodan Brcin (eMVP)" wrote:
> > > > >>>
> > > > >>> > Hi Paul,
> > > > >>> >
> > > > >>> > > Can anyone from Microsoft help or provide a form
> > > > to report
> > > > >>> > > this bug?
> > > > >>> >
> > > > >>> > Not from MS but here is the form :-)
> > > > >>> >
> > > > http://msdn.microsoft.com/embedded/community/community/fee
> > > > dback/feedxp/default.aspx
> > > > >>> >
> > > > >>> > Regards,
> > > > >>> > Slobodan
> > > > >>> >
> > > > >>> >
> > > > >>> >
> > > > >
> > > > >
> > > > >.
> > > > >
> > > >

Relevant Pages

  • Newest of newbies needs to know basics
    ... I've got a IIS running XP on my home computer to serve web pages on the net. ... with FrontPage and I don't need to type in a username and password. ... permissions in Windows or IIS security in general. ...
    (microsoft.public.inetserver.iis.security)
  • Re: CDO MAPI ERROR - possibly IIS security issue
    ... > knows if this could be an IIS security issue. ... Office XP installed with Outlook and CDO option checked ... > Windows 2000 server where is will eventually be deployed. ...
    (microsoft.public.inetserver.iis.security)
  • Re: Username/Password protect a file: now I cant download it at all
    ... There is a news group for IIS security where you may also want to post. ... below on IIS authentication. ... anonymous permissions activated) I can't download the file. ...
    (microsoft.public.win2000.security)
  • Re: Newest of newbies needs to know basics
    ... WindowsUpdate don't track every patches. ... > I've got a IIS running XP on my home computer to serve web pages on the ... > with FrontPage and I don't need to type in a username and password. ... > permissions in Windows or IIS security in general. ...
    (microsoft.public.inetserver.iis.security)
  • Re: XP Pro/IIS 5.1/.NET 1.1 Performance Problem
    ... I ran all updates this morning including .Net ... SP1 but no luck. ... Uninstalling IIS and then ... >> I have tons of other software which I will have to reinstall if I ...
    (microsoft.public.dotnet.framework.aspnet)