Re: Also about the FBA Generic Command.
From: Slobodan Brcin \(eMVP\) (sbrcin_at_ptt.yu)
Date: 08/02/04
- Next message: Malvem: "How to build a application component"
- Previous message: Andy: "Re: Also about the FBA Generic Command."
- In reply to: Andy: "Re: Also about the FBA Generic Command."
- Next in thread: Andy: "Re: Also about the FBA Generic Command."
- Reply: Andy: "Re: Also about the FBA Generic Command."
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 2 Aug 2004 12:10:09 +0200
You have changed the Phase from 0, right?
What version of XPe do you use?
Regards,
Slobodan
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Do have an opinion on the effectiveness of Microsoft Windows Mobile and Embedded newsgroups? Let us know!
https://www.windowsembeddedeval.com/community/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"Andy" <1@2.3> wrote in message news:u1sPhUHeEHA.2848@TK2MSFTNGP10.phx.gbl...
> Thanks.
> But still the same error. :<
>
> "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> 写入邮件
> news:euVqpOHeEHA.3840@TK2MSFTNGP10.phx.gbl...
> > Hi Andy,
> >
> > For test remove all "FBA Generic Command" resources from TD.
> > Add new one.
> > Enter any path in FilePath.
> > Change Phase.
> >
> > Try building.
> > FilePath is used by FBA not by TD.
> >
> > Best regards,
> > Slobodan
> >
> > "Andy" <1@2.3> wrote in message
> news:uF5ROFHeEHA.724@TK2MSFTNGP10.phx.gbl...
> > > 1. I use TD, and tools->options->build->Extra Files Folder: set to
> c:\DX90.
> > > 2. In c:\DX90\ have all dx9.0 setup files.
> > > 3. I add the DX90 into my image use setting:
> > > Extera Files->add all in folder..., and include all the DX setup
> files.
> > > 4. I add the FBA generic commadn use setting:
> > > Extra Resource->add FBA generic command->set the FilePath=
> > > %24%\DX90\dxinstall.exe
> > > 5. then check and build, it show the error below when build:
> > > Error 1004: Invalid resource: "FBA Generic Command"
> > >
> > > If I modify the FilePath=%30%\DX\dxinstall.exe or c:\dx90\dxinstall.exe,
> > > also error.
> > > And I set the FilePath = %11%\cmd.exe, it still error
> > >
> > > Whether am I right to do so that let the dx9.0 install when FBA?
> > >
> > >
> > >
> > >
> > >
> > > "Slobodan Brcin (eMVP)" <sbrcin@ptt.yu> 写入邮件
> > > news:u4dSq%23GeEHA.2168@TK2MSFTNGP10.phx.gbl...
> > > > Hi Andy,
> > > >
> > > > Can you tell us error message that TD show you?
> > > >
> > > > Best regards,
> > > > Slobodan
> > > >
> > > > "Andy" <1@2.3> wrote in message
> > > news:%23Cas67GeEHA.1048@tk2msftngp13.phx.gbl...
> > > > > Yes, I have include the dxinstall.exe file.
> > > > > After bulid, i check the image,there is a DX90 folder in it, it's
> the
> > > > > install files of DX9.0.
> > > > >
> > > > >
> > > > > "Bing.Chen" <bing.chen@advantech.com.tw.NO_SPAM> 写入邮件
> > > > > news:OTKjX5GeEHA.3944@tk2msftngp13.phx.gbl...
> > > > > > Dear Andy,
> > > > > >
> > > > > > Do you make sure that dxinstall.exe is included in your image?
> > > > > >
> > > > > > --
> > > > > > Best Regards,
> > > > > > Microsoft MVP for Windows Embedded
> > > > > > Bing Chen
> > > > > > Advantech Co., Ltd.
> > > > > >
> > > > > >
> > > > > > "Andy" <1@2.3> 秎ン news:%23jT$$PGeEHA.1656@TK2MSFTNGP09.phx.gbl
> い
> > > 级糶
> > > > > ...
> > > > > > > I want the image run the c:\dx90\dxinstall.exe when FBA.
> > > > > > > And I add the files use the Extra Files, it runs ok.
> > > > > > > And I add the Extra Resources, and add the FBA Generic Command.
> > > > > > >
> > > > > > > I let the Filepath=%24%\DX90\dxinstall.exe, it failed when
> build.
> > > > > > > I let the Filepath=c:\DX90\dxinstall.exe, it failed when build.
> > > > > > >
> > > > > > > How I set can let the c:\dx90\dxinstall.exe run when FBA?
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>
- Next message: Malvem: "How to build a application component"
- Previous message: Andy: "Re: Also about the FBA Generic Command."
- In reply to: Andy: "Re: Also about the FBA Generic Command."
- Next in thread: Andy: "Re: Also about the FBA Generic Command."
- Reply: Andy: "Re: Also about the FBA Generic Command."
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
