Targeting 2 slightly different motherboards with same XP Embeddedi

From: ms (ms_at_discussions.microsoft.com)
Date: 07/15/04 

Date: Thu, 15 Jul 2004 08:39:05 -0700

Hi,

   I have 2 slightly different motherboards that I want to target with the same XP Embedded image. One requires an updated version of the S3 video driver than the other.
I have created a component in target designer for the driver and incorporated in image which runs on first motherboard. I have also created a separate component
for the updated version of the S3 driver that i need to put in my image for the 2nd motherboard.

My question is, do i need to create a new repository set for the files for this updated driver, if i use old repository i would overwrite the files for old driver.
Overall i want the motherboard that requires the updated S3 driver to use that when it boots and the motherboard that requires the older S3 driver to use that even though both are in the same image. Hope this is clear. Any ideas how to do this?

Thanks
   ms

Relevant Pages

  • Re: P4P800 SE -- drivers for networking?
    ... Your manual should have a drawing of the motherboard, ... shows a Marvell driver ... Marvell, ... I checked in the BIOS and the on-board LAN is enabled but the onboard LAN ...
    (alt.comp.periphs.mainboard.asus)
  • Re: Dead Mobo or PSU?
    ... cleared out a bunch of dust and decided to buy a new heatsink and PSU ... was searching for a new driver to the new 8600 GTS, ... download and install that driver while the system was still shutting ... motherboard wasn't even going through post anymore. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: Epox EP-8RDA3+ motherboard
    ... Nvidia motherboard chipsets just aren't Linux-friendly -- because ... Linux can deal with basically any ol' CPU and any ol' RAM circuitry; ... but doesn't list the driver. ...
    (comp.os.linux.hardware)
  • Re: M2N8-VMX motherboard
    ... The motherboard drivers cd was not with the motherboard when I ... can't find the driver for ACPI \ ATK0103 High Precision Event ... I read a post in Google where one bloke said that this driver ... System timers are the timers used by ...
    (alt.comp.periphs.mainboard.asus)
  • Re: No audio device after latest Widows Update
    ... the driver you need will correspond to the audio codec on your motherboard. ... While the vast majority of onboard audio solutions are either AC’97 or HD ... determine what type of audio solution you have on your motherboard. ...
    (microsoft.public.windowsupdate)