Re: ramdisk on two hard drive

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Slobodan Brcin \(eMVP\) (sbrcin_at_ptt.yu)
Date: 07/06/04 

Date: Wed, 7 Jul 2004 00:06:01 +0200

Hi Greg,

Try removing only things from 1, 2.
If it does not work try removing 1,2,5.

1. HLKM\System\Setup\SystemPartition
2. HKEY_LOCAL_MACHINE\SYSTEM\MountedDevices

Please try reading error from device manager and give it to us.
Also examine setupapi.log from XPe when you boot to your image it should tell you what went wrong.

Best regards,
Slobodan

"Greg Chu The Small" <greg_chu @ wendys.com> wrote in message news:%231BDY%235YEHA.384@TK2MSFTNGP10.phx.gbl...
> Hi, I could not find my old thread. So let me continure my problem.
>
> The hard drive that used to do FBA to create the RAMDISK image boot fine and
> I can use diskpart.
>
> But if I use another hard drive to boot with the same image then could not
> use diskpart to see the hard drive.
>
> I searched through registry and find there are some entries withe the hard
> drive model saved in there.
>
> Have tried all suggestions in the past posts
>
> 1. deleted system partioin
> 2. deleted moutted device
> 3. deleted mshdc.inf
> 4. deleted disk.inf
> 5. deleted gendisk
> 6. removed class entries
>
> Just could not get it to work.
>
> Any one has any clue?
>
> Thanks!
>
> Greg
>
>

Relevant Pages

  • Re: PC freezing on Gateway splash screen
    ... the RAM, removing all the optical drives, swapping the hard drive, and ... removing the video card and I still had the same problem as before. ... I really know nothing about power ... minimum necessary to boot the system, ...
    (microsoft.public.windowsxp.hardware)
  • RE: System hangs on cold power up in Windows XP Pro
    ... your hardware and download and update their drivers. ... doing this would be to first try and boot into safe mode. ... keyboard and mouse in the device manager and reboot the system and check to ... and the problem I am referring to does not happen on a restart. ...
    (microsoft.public.windowsxp.perform_maintain)
  • Re: Windows XP can no open CD in CDROM.
    ... In Device Manager, please select the CD Rom and look to see the Error message there. ... And set your boot to boot from the CD-rom before the ... windows show message: ...
    (microsoft.public.windowsxp.general)
  • Re: Annoying Found New Hardware window
    ... the reference to the hardware from ... Device Manager ... EVERY time I boot up the PC, I get a window that says, "Welcome to the ... installation CD or floppy disk, ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Motherboard swap
    ... Chances are high the system will boot, but you'll end up with a long list ... of "Phantom" devices in Device Manager. ... Seagate 120GB IDE vs Seagate 80GB IDE ...
    (microsoft.public.windowsxp.general)