Re: Getting blue screen of death
From: Slobodan Brcin \(eMVP\) (sbrcin_at_ptt.yu)
Date: 07/04/04
- Next message: Anders Gulbęk: "Re: Getting blue screen of death"
- Previous message: Slobodan Brcin \(eMVP\): "Re: My first diskless station"
- In reply to: Anders Gulbęk: "Re: Getting blue screen of death"
- Next in thread: Anders Gulbęk: "Re: Getting blue screen of death"
- Reply: Anders Gulbęk: "Re: Getting blue screen of death"
- Messages sorted by: [ date ] [ thread ]
Date: Sun, 4 Jul 2004 15:27:56 +0200
Hi Anders,
You should probably use your chipset inf files to make components that will support your chipset and add them to DB. After that
import TAP results again.
You are missing chipset drivers required for your device to boot.
Best regards,
Slobodan
"Anders Gulbęk" <anders@gulbaek.net> wrote in message news:%23Z1LEnbYEHA.712@TK2MSFTNGP11.phx.gbl...
> Okay, sorry it was a 0x0000007B error I got.
>
> And here is a copy of was happen med I import my .pmq fil into the target
> designer.
>
> I removed all info except the once that gives error or warnings
>
>
> Starting configuration activation at: 04-07-2004 14:13:30...
> Info 100: Initializing new configuration
> Info 102: Adding base system component to configuration
> Info 101: Initializing new component: "Base Component [Version
> 5.1.2600, R620]"
> CFDB: 0,55 secs, 5 reqs. LAB: 0,09 secs, 4 reqs, 25% hits, 2 entries
> Activation complete, elapsed time: 0,59 seconds
> No errors or warnings
>
> Target Analyzer found 98 devices.
> Loading the driver database. (14:15:50)
> Driver database contains 9156 drivers. (14:18:47)
> Could not find a driver for Maxtor 1394 Storage Front Panel
> (1394\Maxtor&1394_Storage_Front_Panel*).
>
> Could not find a driver for HID-compliant device
> (HID\Vid_08ca&Pid_0021&Rev_0100&Col02).
>
> Adding RADEON 9800 XT to the configuration.
> Info 101: Initializing new component: "RADEON 9800 XT [Version
> 6.14.10.6451, R2]"
> Warning 1116: Adding unreleased component to configuration: "RADEON 9800 XT
> [Version 6.14.10.6451, R2]"
>
> Adding RADEON 9800 XT - Secondary to the configuration.
> Info 101: Initializing new component: "RADEON 9800 XT - Secondary
> [Version 6.14.10.6451, R2]"
> Warning 1116: Adding unreleased component to configuration: "RADEON 9800
> XT - Secondary [Version 6.14.10.6451, R2]"
>
> Could not find a driver for Silicon Image SiI 3114 SATARaid Controller
> (PCI\VEN_1095&DEV_3114&SUBSYS_61141095&REV_02).
>
> Could not find a driver for 3Com Gigabit NIC
> (PCI\VEN_10B7&DEV_1700&SUBSYS_1406147B&REV_12).
>
> Could not find a driver for Realtek AC'97 Audio for VIA (R) Audio Controller
> (PCI\VEN_1106&DEV_3059&SUBSYS_1406147B&REV_60).
>
> Could not find a driver for Standard Enhanced PCI to USB Host Controller
> (PCI\VEN_1106&DEV_3104&SUBSYS_1406147B&REV_86).
>
> Could not find a driver for VIA Serial ATA RAID Controller
> (PCI\VEN_1106&DEV_3149&SUBSYS_1406147B&REV_80).
>
> Could not find a driver for PnP BIOS Extension (root\d346bus).
>
> Could not find a driver for Storage Device Image Device (SDI).
>
> Could not find a driver for Generic volume (STORAGE\Volume).
>
> Could not find a driver for Generic volume (STORAGE\Volume).
>
> Could not find a driver for Siemens SX1 (USB\Vid_11f5&Pid_0001&Rev_0001).
>
> Could not find a driver for Siemens SX1 Swup
> (USB\Vid_11f5&Pid_0002&Rev_0000).
>
>
>
>
> "KM" <konstmor@nospam_yahoo.com> wrote in message
> news:OOJd3QWYEHA.2016@TK2MSFTNGP09.phx.gbl...
> > Anders,
> >
> > I've just realized that I misread you post. you haven't mentioned 7B Stop
> > code but some 70.
> >
> > Could you give us more info on the BSOD you see? The error code, any
> driver
> > mentioned, etc.?
> >
> > Sorry for any confusion,
> > KM
> >
> > > Anders,
> > >
> > > Follow this tips:
> > >
> >
> http://msdn.microsoft.com/embedded/community/community/tips/xp/stoperr7b/default.aspx
> > >
> > > KM
> > >
> > > > Hi im new in the world of xp embedded systems, and I have been
> following
> > > the
> > > > book Windows XP Embedded Step by step written by James Beau Cseri.
> > > >
> > > > Now my problems is that im getting a blue screen of death with the
> error
> > > > code 0x00000070 I think im missing someting, but im not sure what it
> is.
> > > >
> > > > Ohh and I got my version of xp embedded through the universitet and im
> > not
> > > > sure it included SP1, is there a way to check it ? the version number
> in
> > > the
> > > > Target Designer is 2.00.0620.0
> > > >
> > > > Hope someone can help me
> > > > Anders Gulbęk
> > > >
> > > >
> > >
> > >
> >
> >
>
>
- Next message: Anders Gulbęk: "Re: Getting blue screen of death"
- Previous message: Slobodan Brcin \(eMVP\): "Re: My first diskless station"
- In reply to: Anders Gulbęk: "Re: Getting blue screen of death"
- Next in thread: Anders Gulbęk: "Re: Getting blue screen of death"
- Reply: Anders Gulbęk: "Re: Getting blue screen of death"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
