Re: El Torito Bootable CD boot error - Missing or corrupt ntoskrnl.exe

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: KM (konstmor_at_nospam_yahoo.com)
Date: 06/23/04

  • Next message: George: "Re: Which component control the hibernate function?" 
    Date: Wed, 23 Jun 2004 01:45:18 -0700

    Styler,

    You may want to guide us through the exact steps you performed.
    Also, post (as attachment) you FBAlog.txt file.
    Also, make sure you got the latest EWF QFEs installed.

    KM

    > After following all the steps for creating a bootable El Torito CD, I
    receive the following message while trying to boot the final image:
    >
    > Windows could not start because the following file is missing or corrupt:
    > <Windows root>\system32\ntoskrnle.exe
    >
    > Please re-install a copy of the above file.
    >
    > The following error does occur with etprep: Failed to swap El Torito disk
    drive letter. Error = 0x1.
    >
    > Any help would be appreciated.
    >

  • Next message: George: "Re: Which component control the hibernate function?"

    Relevant Pages

    • Re: FH shop out guide
      ... Shouldn't need a guide to swap a FH playfield, you can do it without one:) Just take a lot of pics and have fun. ... I know differing opinions exist for swaps, and no method is the 'right' method and no method is the 'wrong' method, but I personally like to do all the parts that go from the top of the PF to the bottom first, such as posts, lane guides, ball trough etc, then run the switch harness, the lamp harness and finally the solenoid harness. ... Print out the switch matrix, solenoid table and lamp matrix from the manual, is nice if you get caught up with where something goes. ...
      (rec.games.pinball)
    • Re: motherboard replaced - but no boot!
      ... the whole point of this mess was to swap the same exact ... mobo and reboot as if nothing had happened. ...
      (microsoft.public.windowsxp.hardware)
    • Re: FH shop out guide
      ... guide, any suggestions? ... On the assemblies that don't have plugs I leave a bit of ... I use solder wick as traces for the underside and a staple gun to ...
      (rec.games.pinball)
    • Re: Random numbers with no duplicates
      ... >>decrement the pick index. ... > To be exact, do it only 9 times, on the tenth time you only have one ... elegant and fast algorithm? ... works even if it has to swap the chosen value ...
      (alt.comp.lang.learn.c-cpp)
    • Re: FH shop out guide
      ... guide, any suggestions? ...  Its only pinball site is a dead link to the ...
      (rec.games.pinball)