Re: Installation problem xpe
From: David (david_at_nospam_bargains4uonline.com)
Date: 05/11/04
- Next message: Brad Combs: "Re: MicroTouch calibration problem"
- Previous message: steve_cho: "To show Device Manager .."
- In reply to: KM: "Re: Installation problem xpe"
- Messages sorted by: [ date ] [ thread ]
Date: Tue, 11 May 2004 22:03:46 +1000
Finally worked it out.
My C: drive needs to have more free space so the downloaded files can self
unpack themselves into the correct folders.
Thanks for your help.
David
"KM" <konstmor@nospam_yahoo.com> wrote in message
news:uvJx5LANEHA.644@tk2msftngp13.phx.gbl...
> David,
>
> Are you just trying to extract from all the cab files to a CD?
> Then {xxx}.cab files contain XPe Repository files. They will be extracted
to
> "\Windows Embedded Data\Repositories\{xxx}" directories.
>
> KM
>
> > If I use winzip on disk1.cab and disk2.cab, tools.cab and msde.cab I can
> see
> > the original path to copy the files to and thus make a cd.
> >
> > 07/05/2004 10:22 AM 2,000,843 disk1.cab
> > 07/05/2004 10:25 AM 55,062,466 disk2.cab
> > 07/05/2004 10:27 AM 43,476,777 MSDE.cab
> > 07/05/2004 10:27 AM 5,457,793 tools.cab
> > 07/05/2004 10:41 AM 10,303,136
> > {022716D8-0CF0-4779-B94C-8E52EB36709C}.CAB
> > 07/05/2004 10:42 AM 2,845,652
> > {347677C8-8935-4D30-8DDA-FB6D701ACF47}.CAB
> > 07/05/2004 10:42 AM 209,998,653
> > {484C9D34-846E-40E2-A2E6-FF2771A303D5}.CAB
> > 07/05/2004 10:58 AM 0 files.lst
> > 8 File(s) 329,145,320 bytes
> > 2 Dir(s) 925,405,184 bytes free
> >
> > The other files do not show their original path so what disk and folder
do
> > they go in?
> >
> > I looked at the articles attached in your post below and see exactly the
> > same errors documented. It explains what I have to install to get it to
> > work. It doesn't say how to put them on the disk and make it the eval
tool
> > work the way it was intended.
> >
> > eg A packing list should have come with the eval download.
> >
> > I will try and put them on varous rewriteable cds and test it until I
get
> a
> > working set.
> >
> > Regards
> > David
> >
> >
> >
> > "KM" <konstmor@nospam.yahoo.com> wrote in message
> > news:uNiObV8MEHA.268@TK2MSFTNGP11.phx.gbl...
> > > David,
> > >
> > > I don't understand the problem you are having. But from myself I can
> tell
> > you that I downloaded the cab files a while ago and was
> > > able to unzip all of them properly (proper directory structure). I
used
> > WinZip to unpak the cabs.
> > > Hope your downloaded disk2.cab is not corrupted.
> > >
> > > Also see if anything from these links helps:
> > >
> > >
> >
>
http://msdn.microsoft.com/library/en-us/xpehelp/html/xetbsTroubleshootingIns
> > tallation.asp
> > >
> > >
> >
>
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=UTF-8&q=database+insta
> > llation+cab+error+&meta=group%3Dmicrosoft.public.windowsxp.embedded.*
> > >
> > > --
> > > KM,
> > > BSquare Corporation
> > >
> > > > Hi All
> > > >
> > > > I have downloaded the evaluation version of windows xpe from
> Microsoft.
> > > >
> > > > I have files called disk1, disk 2, tools, {34xxxxx.. } etc as per
> their
> > > > standard download.
> > > >
> > > > When I open the files and view inside the cabinets or the zip files
> with
> > > > Winzip it is obvious based on the original path stored inside the
> > compressed
> > > > file what goes onto what disk and where. eg filepath.
> > > >
> > > > Some of the files however do not have the filepath stored inside
them.
> > If I
> > > > copy them to a cd the setup works and only runs from a cd drive.
Thats
> > fine.
> > > > If I however choose to install the database engine and the database
> > > > components I get an error trying to extract the cabinets. I suspect
> this
> > is
> > > > why I cannot login to the target designer or any other tools as it
> needs
> > to
> > > > logon to a database to open a template.
> > > >
> > > > Has anyone got a packing list of the cds the way they are intended
to
> be
> > > > used?
> > > >
> > > > I have tried to order the cd from Microsoft to circumvent this issue
> and
> > the
> > > > transaction stalls when trying process a purchase in the website.
> > > >
> > > > It must be the full moon that is trying to stop me from kicking
goals
> > with
> > > > my project.
> > > >
> > > > Thanks in advance for any help.
> > > >
> > > > David
> > >
> > >
> >
> >
>
>
- Next message: Brad Combs: "Re: MicroTouch calibration problem"
- Previous message: steve_cho: "To show Device Manager .."
- In reply to: KM: "Re: Installation problem xpe"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
