Re: ATA Flash Disk not getting detected.
From: Slobodan Brcin \(eMVP\) (sbrcin_at_ptt.yu)
Date: 04/05/04
- Next message: Lucvdv: "Re: El Torito and stop 7B"
- Previous message: Ranga: "Re: ATA Flash Disk not getting detected."
- In reply to: Ranga: "Re: ATA Flash Disk not getting detected."
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 5 Apr 2004 11:57:40 +0200
I have no idea.
Check your setupapi.log for more details on this error.
Regards,
Slobodan
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Have an opinion on the effectiveness of Microsoft Embedded newsgroups? Tell
Microsoft!
https://www.windowsembeddedeval.com/community/newsgroups
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"Ranga" <rangampalayam@rediffmail.com> wrote in message
news:6e6631b7.0404050138.3b482fb2@posting.google.com...
> Dear Slobodan,
>
> Thanks for your help.
>
> I ran XPe from my harddisk. Before creating the RAMDisk image, I
> deleted the two registry entries HKLM\System\Setup and
> HKLM\System\MountedDevices. Now I created a Remote Boot image out of
> it.
>
> I placed that harddisk in my Target system and booted from the Remote
> boot image. Now the Harddisk gets detected as a D:\ Drive. Now i am
> able to format it.
>
> The problem occurs when I place my ATA Flash Disk in the IDE Slot
> instead of my Harddisk.
>
> This ATA Flash Disk is not getting detected.
>
> What is the reason behind this?
>
> Please help me.
>
> With Regards,
> Ranga.
>
>
>
>
>
> --------------------------------------------------------------------------
> Windows cannot load the device driver for this hardware. The driver
> may be corrupted or missing. (Code 39).
> --------------------------------------------------------------------------
>
>
> "Slobodan Brcin \(eMVP\)" <sbrcin@ptt.yu> wrote in message
news:<eVveLkMGEHA.1156@TK2MSFTNGP12.phx.gbl>...
> > Hi,
> >
> > This is known issue with ramdisk that mount itself on C: and hides
> > underlying HDD.
> >
> > 1. Before shutting down your device for last time (before creating SDI
file)
> > delete all registry values from HKLM\System\MountedDevices
> > 2. Also it was suggested to delete SystemPartition key from
> > HKLM\System\Setup.
> >
> > Does this help?
> >
> > Regards,
> > Slobodan
> >
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > Have an opinion on the effectiveness of Microsoft Embedded newsgroups?
Tell
> > Microsoft!
> > https://www.windowsembeddedeval.com/community/newsgroups
> > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > "Ranga" <rangampalayam@rediffmail.com> wrote in message
> > news:6e6631b7.0404020716.253fe918@posting.google.com...
> > > Dear all,
> > >
> > > I booted XPe with an ATA Flash Disk with ramdisk.sys present in it and
> > > created a remote boot image out of it.
> > >
> > > I booted the system from that remote boot image with the ATA Flash
> > > Disk present in the IDE port of the system.
> > >
> > > After booting thro' PXE, the system is not detecting the ATA Flash
> > > Disk as a separate drive.
> > >
> > > So, I used the Add Hardware Wizard and I found that the name 128MB ATA
> > > Flash Disk in the list of Installed Hardware.
> > >
> > >
> > > At last for this ATA Flash Disk, I received the following message in
> > > "Completing the Add Hardware Wizard:"
> >
> --------------------------------------------------------------------------
> > ---
> > > Windows cannot load the device driver for this hardware. The driver
> > > may be corrupted or missing. (Code 39).
> >
> --------------------------------------------------------------------------
> > ---
> > >
> > > I would like to know, how to make, this ATA Flash Disk get detected as
> > > a separate Drive when booting thro' PXE.
> > >
> > > Please help me regarding this.
- Next message: Lucvdv: "Re: El Torito and stop 7B"
- Previous message: Ranga: "Re: ATA Flash Disk not getting detected."
- In reply to: Ranga: "Re: ATA Flash Disk not getting detected."
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
