Re: Problem with AHCI Driver
- From: Pastor Dave <ananias917_@xxxxxxxxxx>
- Date: Mon, 25 May 2009 02:22:55 -0400
On Fri, 12 Sep 2008 15:17:43 +0200, "Gianluca"
<g.facca@xxxxxxxxxxxxxx> spake thusly:
I have WindowsXpEmbedded operating System
on a 2GB compactflash connected to an Intel
DG33FB motherboard by a CF to SATA adapter.
If I select "Native ide Driver for SATA ", the system
boots properly. But if I select AHCI driver,
the system does not boot and I see a disk
read error.
Is where any way to fix this problem?
Well, if you already installed XP onto the drive
in "IDE Mode", then that's what you're stuck with.
One would have to set it for "AHCI" before installing
the OS and would also need the correct AHCI driver
to give XP during the install, when it asks if you have
any third party drivers that you need to install.
The problem for me trying to do it, was that it requires
the driver to be on a floppy and my laptop doesn't
have a floppy drive, so I had to go with IDE Mode
when I installed XP64 (same for XP32).
--
Pastor Dave
"The burden of Babylon, which Isaiah the son of Amoz
did see. Howl ye; for the day of the Lord is AT HAND;
it shall come as a destruction from the Almighty.
Therefore shall all hands be faint, and every man's
heart shall melt:" - Isaiah 13:1,6-9
This is the prophecy regarding Babylon, which was
fulfilled in 539 B.C.. Did "every man's heart
(actually, physically) melt? If not, then maybe
you need to think about how you read the New Testament,
sibce it is not an all new thing, but is the fulfillment
of various prophecies in the Old Testament.
And if you still try to claim that the New Testament
should be taken as physically literal anyway, then
you admit that you lie when you claim to interpret
Scripture by Scripture. It is that simple!
.
- Prev by Date: Re: 64 bit structure alignment?
- Next by Date: Re: Synaptics Touchpad Advanced Problems
- Previous by thread: Re: 64 bit structure alignment?
- Next by thread: ACPI Driver
- Index(es):
Relevant Pages
|
