How can I read/write data from HID device in user mode?

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

I'm developing an application in winXP without private driver. I would
like to read/write my HID device(USB skype phone) from interrupt
endpoint with vendor command. How can I do? Any function I
can use, when I get the device handle.

.

Relevant Pages

  • Re: How can I read/write data from HID device in user mode?
    ... Please do not send e-mail directly to this alias. ... like to read/write my HID devicefrom interrupt ... endpoint with vendor command. ...
    (microsoft.public.windowsxp.device_driver.dev)
  • Re: USB Status Pipe Strategy
    ... I guess what concerns me is how fast the host may actually poll. ... the time specification that is put on an interrupt endpoint is ... You're right in that this could be done as a Bulk Endpoint. ... I could continuously send an URB from the ...
    (microsoft.public.development.device.drivers)
  • USBEHCI.SYS bug with high-bandwidth interrupt endpoints
    ... I was investigating USB 2.0 high-bandwidth interrupt ... three transactions per microframe with a maximum packet size of 1024 ... bytes in the endpoint descriptor. ...
    (microsoft.public.development.device.drivers)
  • Re: USB RNDIS Debug with USB Chief
    ... "one is that the INTERRUPT IN endpoint, used to notify the HOST of a new ... RndisMessage, is shows as not completed in the USB Chief. ... When XP send out RNDIS Write message through endpoint 0, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Castle USB API: Interrupt endpoints
    ... >> Under the Castle USB API, how does one send bytes to an interrupt ... >> The output stream to the endpoint opens fine; I get a handle, ... >> I haven't found any code examples for interrupt endpoints anywhere, ... This code works well for reading from a mouse: ...
    (comp.sys.acorn.programmer)