Re: Replace DVD drive easy ?

Try a CD/DVD lens cleaner first.. then if that doesn't do the job, replace
unit for unit on the same cable.. look at the back of the unit and match the
jumper..

--
Mike Hall
MVP - Windows Shell/User


<bcarwell@xxxxxxxxxx> wrote in message
news:1141616714.110300.108340@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I have a Fry's desktop computer with a DVD burner in it. Its about 3
years old and after burning 20 DVDs today it looks like the DVD drive
has crapped out (it plays DVD movies but doesn't recognize CDROM, music
CDs, or blank CDs for burning, even after reboot).

First question: is there anything I can try (like a lens cleaner) ?

Second question: how involved is it to replace with a new DVD burner ?
I know all about Master, Slave, cables, etc. and how to physically
install.

But what concerns me is: (1) will I have to go through some sort of
dance with Microsoft thinking my computer is different (I have XP Home)
or does changing a DVD burner out not trigger anything with the
operating system; and
(2) what's the deal with the
burning software and drivers ? I have several applications installed
that burn (Adobe Encore, Nero, several video editing programs like
Pinnacle Studio, Adobe Premier, etc.). Am I going to have to reinstall
all those applications ? Or just a driver for the new drive (the
manual for the new drive I think doesn't say it has a driver per se but
it came bundled with burning application software that I presume has
the drivers).

Please note that the new DVD drive is a different brand than the one
that's apparently broken and supports dual layer whereas the original
broken one was only single layer and different brand. The new one
doesn't have to be configured for dual layer as I never use dual layer
disks, if that matters.

Any advice would be much appreciated before I take it in to Fry's. I'm
capable of getting under the hood since I've replaced memory, hard
drives, cards, etc. a lot. I just haven't ever done so in Windows XP
and haven't replaced a DVD drive with so many applications depending on
it for burning, so I don't know the driver story. I don't care if the
new drive is optimized to the greatest driver or how fast it burns.

Thanks for any help.

Bob



.

Relevant Pages

  • Re: CD Help
    ... why don't you see if it works without windows with a bootable DVD or CD ???? ... >> special driver for the cd to function. ... Just because a CD or DVD spins up doesn't mean it's OK. ... Have you tried physically disconnecting all CD/DVD drives by pulling ...
    (microsoft.public.windows.vista.general)
  • Re: cyclic redundancy check
    ... -Files were not successfully/completely transferred to DVD. ... again and use the Validate/Verify option in your burning software to test ... There are cleaning kits for discs and for drives. ... air if sprayed too densely will cause an accumulation of moisture. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Compare 2 computers vs. Dual Core
    ... I don't know if Premiere's core will use dual core, but I know that many of ... to DVD while something else is going on. ... as long as the two source drives are separate. ... Occasionally got a few coasters when burning from J:\ and L:\ simultaneously ...
    (comp.sys.intel)
  • Re: Copying 4,3 GB from DVD to harddisc needs 35 minutes ??
    ... The drive should be running in DMA mode which you can verify by looking at ... some CD drives on the same channel can cause the channel to only operate in ... often recommended DVD burner LG GSA-4163B which officially ... Is there a wrong driver (Officially the Win2000 ...
    (rec.video.dvd.tech)
  • Re: Copying 4,3 GB from DVD to harddisc needs 35 minutes ??
    ... The drive should be running in DMA mode which you can verify by looking at ... some CD drives on the same channel can cause the channel to only operate in ... often recommended DVD burner LG GSA-4163B which officially ... Is there a wrong driver (Officially the Win2000 ...
    (rec.video.dvd.tech)