Re: Standby

From: Sharon F (sharonfDEL_at_ETEmvps.org)
Date: 03/04/04


Date: Thu, 4 Mar 2004 17:57:25 -0600

On Thu, 4 Mar 2004 15:13:20 -0800, <anonymous@discussions.microsoft.com>
wrote:

> Hi Sharon,
>
> It's a desktop, and I've checked all the settings under
> control panel. Do you have any further suggestions?
>
> Brian

What power scheme are you using in Control Panel> Power Options?

When you say that it goes through the whole boot process again, is it
starting over from POST or just from the welcome screen?

If just from the welcome screen, uncheck the box next to Prompt for
password when computer resumes..." If using a screensaver, uncheck a
similar box in the screensaver settings as well.

If it's going through the entire boot process (POST, loading Windows and so
on) then you'll need to dig deeper. Look in Event Viewer for any errors
noted at the time the system goes into standby or when you try to resume.
Am hoping you can find a clue referencing a driver or a program here.

If no luck, try disabling all running programs including those that run in
the background. Put the system into standby and try a resume. If
successful, then there is a program incompatibility that you will need to
track down.

If not successful then a driver or device is not complying with the rigors
of standby and resume. What drivers were updated recently? What hardware
was added since the machine hibernated correctly? May need to check with
the hardware manufacturer for a newer driver that is more standby-friendly.

-- 
Sharon F
MS MVP - Windows XP Shell/User


Relevant Pages

  • Re: Standby
    ... driver or device which is really too complicated for me, ... The monitor turns off OK and my screensaver is ... I have selected enable hibernation under power options ... Put the system into standby and try a ...
    (microsoft.public.windowsxp.customize)
  • Printer port interface problem with hibernation/standby and access to power mgmnt with limited user
    ... I am running XP Home with 3 accounts, one of which is a limited user. ... specific Jetsuite software rather than an ordinary printer driver. ... interface device is preventing the machine from entering standby. ... as the limited user to try and change their power scheme I get "access ...
    (microsoft.public.windowsxp.security_admin)
  • Re: NDIS & power management
    ... You cannot use PoSetSystemState() from your NDIS driver if you want ... NDIS driver to prevent system standby. ... The co-installer also needs to poll standby information from the NDIS ... > In this case our driver must allow it even if there is traffic on WiFi ...
    (microsoft.public.development.device.drivers)
  • Re: X problems
    ... had a problem with an Intel 865G card a long time back. ... As X crashed/hung while the screensaver was active, ... like a problem introduced into the newer version of the driver. ... One of the problems I am having now that I did not have with FC6 is when ...
    (Fedora)
  • Re: NDIS & power management
    ... An NDIS miniport driver should -never- veto going to standby. ... > Scenario no.1: User is manually putting PC into standby mode. ... > In this case our driver must allow it even if there is traffic on WiFi ...
    (microsoft.public.development.device.drivers)