Re: wireless netwrok problem

smlunatick wrote:
On Mar 26, 5:39 am, Barry <robert.an...@xxxxxxxxxxxx> wrote:
Dear smlunatick
Many thanks for taking the time to reply.
I found the manual and have done a reset as you suggested, my laptop is
now picking up a default access point, at full strength, but I still
cannot access the setup page via 192.168.1.100 as shown in the manual.

Perhaps you are right, I need to repalce it!
Many thanks
Barry



smlunatick wrote:
On 24/03/2008 smlunatick <yves...@xxxxxxxxx> wrote:
On Mar 22, 3:06 am, Barry <robert.an...@xxxxxxxxxxxx> wrote:
Dear all
Not sure where I can get support, so I am posting here in the hope
someone can point me in the right direction please.
I have a Newlink 11g Wireless Access Point (NLWL-ACC01) and have
forgotten the wep key. I also cannot load the configuration page to
reset it.
There is no support section on the Newlink website.
Can anyone help please?
Barry
The only way you could fix this is to locate how to complete "reset"
this AP back to the factory defaults. However, the only document for
this AP is supposed to be a user guide, which is already "damaged"
prior to downloading.
One suggestion is to "ditched" this Newlink 11g Access Point. A
possible replacment unit is:
http://www.trendnet.com/langen/products/proddetail.asp?prod=120_TEW-6...
cat=78&status=view
TRENDnet offers support.- Hide quoted text -
- Show quoted text -

You need to check and make sure that the wireless network that you
access is definately yours and not neighbor's. Turn the power off on
your AP and check to see if you still connect to the same wireless
network. If yes, it is not your wireless network.

Hi again, I checked and if I switched off my AP then no wireless available, so it definitely seems to pick up my Access point, but I still cannot load the setup page so I can resent the security settings. Without support from the manufacturers, I will have to spend out more money getting a replacement when I can afford it.
Many thanks
Barry
.

Relevant Pages

  • Re: wireless netwrok problem
    ... smlunatick wrote: ... I found the manual and have done a reset as you suggested, ... I have a Newlink 11g Wireless Access Point and have ... One suggestion is to "ditched" this Newlink 11g Access Point. ...
    (microsoft.public.windowsxp.configuration_manage)
  • Re: Connecting 2 computers to wireless broadband...
    ... FWIW, posts today ... You were the one saying to do a reset to factory defaults. ... someone did that because they were unable to connect on wireless ie your ... Suggestion of just using a cable is so damned obvious by comparison. ...
    (uk.telecom.broadband)
  • Re: wireless netwrok problem
    ... Dear Nepatsfan ... and have gone through the reset process etc and I have also gone to start. ... I have a Newlink 11g Wireless Access Point and have forgotten the wep key. ... If you set up a password and now cannot remember it, you will have to hit Reset button on the back of the WAP to restore the factory default settings. ...
    (microsoft.public.windowsxp.configuration_manage)
  • Re: Need advice on Motel Wireless Setup
    ... To answer you, No, and No. I'm not even positive it is a Senao. ... I did a hardware reset as described in the manual for the NL-2611 I ... Problem is that they have wireless access in about 5 ... You can get a strong signal from Bravo & Charlie in their respective ...
    (alt.internet.wireless)
  • Re: 5555 lost wireless
    ... Just curious John. ... Hard reset, and wireless worked. ... Restored the backup, wireless still worked. ...
    (microsoft.public.pocketpc)
Loading