Dial-up modem connects on an XP PC (WP2). However, although the modem properties show the modem volume is turned up, when connecting using either
by going into Outlook Express or Internet Explorer and clicking on the
connect box, there is no sound from the modem. Before I showed her this
shorter way to connect on this (friend's) PC, she used to dial by
START\CONNECT USING and the modem sound was fine (still is). Sound is on
everywhere, speakers work OK but no dial sound from modem! Ideas, please?
.
Re: Lost my modem during setup ...RAM and you expect the world to be rosy? ... > system worked fine initially except that I had problems with my sound... > The new card was properly installed with driver and shown to be working ... After replacing all the cards and driver I had no modem either. ... (microsoft.public.windowsxp.setup_deployment)
RE: Resolving IRQ conflicts with 4.8 ...Sound, modem, and nic are all recognized now. ... This answer about sound card and my previous msg about nic ... > I believe the unknown device FAQ is for pci Nics and pci Modems. ... (freebsd-questions)
Maxdata notebook winmodem problem ... manufactured by VIA (sound via86cxx and modem is via686, ...drivers and the only one that worked is Smart Link, ... Taking Mandrake 9.2 kernel off the shelf: ... (comp.os.linux.hardware)
Boot Knoppix (was Re: How Do You Know If It Works In Linux?) ... > run pppconfig and see that the modem was not autodetected. ... > else, sound, ethernet, etc worked fine. ... the 'system-info' script found at the URL below will give ... I prefer the output selection/formatting of the system-info ... (Debian-User)
Re: Lost my modem during setup ... actually worked fine if a bit slow until I decided to "fix" the sound card... Previous to that I had a fully functioning working modem and system. ... Replacing the modem and drivers with another modem and driver resulted in the ... (microsoft.public.windowsxp.setup_deployment)
