RE: XPHomeSP2 CableModem Issue

Tech-Archive recommends: Speed Up your PC by fixing your registry

From: Sam C. (SamC_at_discussions.microsoft.com)
Date: 11/03/04 

Date: Wed, 3 Nov 2004 12:09:04 -0800

Surrre, as soon as I post that this thread vanished, the link decides to work
again.
At any rate I got the issue resolved on the computer on my bench:

1. Install the patch (doesn't seem to do anything to the naked eye but it
must've done something)
2. Unplug the cable modem for about 5 minutes
3. Plug the cat5 cable back into the modem
4. Plug the modem back in
5. Check the settings in IE Internet tools to make sure it's still set to
autodetect settings
6. Disable the firewall
7. Click "repair" on the network connection
8. At this point I had my connection back
9. Re-enable the firewall
10. Reboot the computer to make sure the changes stay active.

Also, as an aside, before I did all of this the ipconfig /all displayed an
unknown node and I was able to manually enter a working IP from my other
computer that connected to the web on the modem and it stated it was
connected (couldn't browse the web tho)

So, I hope this helps you,

Sam C, feel free to send an email to strahan_lcaf(AT)hotmail(DOT)com

"Sam C." wrote:

> heh well, I downloaded the patch...no such luck.
> Altho I did manually input the IP and DNS of my working computer in and it
> says it's connected...can't browse but it's connected. Time to figure out
> how to mess with DHCP I guess.
>
> The URL for the patch (who knows, may work for you!) is:
>
>
> http://www.microsoft.com/downloads/details.aspx?FamilyID=17d997d2-5034-4bbb-b74d-ad8430a1f7c8&DisplayLang=en
>
> Sam C, HTH
>
> "tom" wrote:
>
> > atta boy, keep up the good work!

Relevant Pages

  • RE: XPHomeSP2 CableModem Issue
    ... Unplug the cable modem for about 5 minutes ... Click "repair" on the network connection ... connected (couldn't browse the web tho) ... Sam C, feel free to send an email to strahan_lcafhotmailcom ...
    (microsoft.public.windowsxp.configuration_manage)
  • Limited or no connectivity (tried everything on pchucks, out of ideas)
    ... D-link WBR-2310 wireless router ... computers on the network. ... When I connect the modem directly there is no ... wanted to make sure I still had a connection. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Router install problem
    ... The internet reaches the computer through a modem at ... install a wireless router between the ... After telling me to check the connection between the router ...
    (microsoft.public.windowsxp.network_web)
  • half begin beneath Loarca
    ... He will pretty weave concerning Sam when the daily supervisions ... campaign in connection with the forward sequence. ...
    (sci.crypt)
  • Re: what is the 1394 connection ?
    ... Where all but my 2 modem connections were either ... >> something above about them having a 'The shop used the Firewire port ... >supporting Ethernet for a LAN connection to an intranetwork. ... So it doesn't matter if you use a NIC, USB, or Firewire because ...
    (microsoft.public.windowsxp.newusers)