PCI card not recognized by plug and play

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: bruce (anonymous_at_discussions.microsoft.com)
Date: 06/20/04 

Date: Sun, 20 Jun 2004 10:13:09 -0700

Have an XP home with new motherboard and new modem and
sound card from dell for warranty repairs. Plug and Play
will not recognize the new cards. This is the same
problem before motherboard was replaced. How do I get XP
to recognize the cards?

Relevant Pages

  • Re: Problem with a NIC in FBSD 6.2
    ... cards are recognized with no conflicts. ... Run over the motherboard with a large ... may want to have a play with the PCI IRQ settings in your motherboard: ... - Change them from auto to one different IRQ to each slot. ...
    (freebsd-questions)
  • Re: PCI card not recognized by plug and play
    ... Bruce, ... Plug and Play and make sure it's ... > will not recognize the new cards. ...
    (microsoft.public.windowsxp.configuration_manage)
  • Re: Fresh Air
    ... Allan Adler writes: ... I haven't removed anything from the motherboard and have been just gazing ... Two other cards plugged into short white receptacles. ... According to a Google search for AB-BH6, that refers to an ABIT AB-BH6 ...
    (comp.sys.ibm.pc.hardware.misc)
  • Re: New Dell CPx Motherboard wont POST
    ... Have you tried changing the small power board that plugs in to the ... The motherboard actually has two cards that plug into it. ... identical mobo, I swapped out both cards and the heatsink and fan, one ...
    (comp.sys.laptops)
  • OT Re: monitor computer health
    ... I didn't read the motherboard BIOS material, but often, info that's included in the manuals often doesn't apply to all versions of any models of motherboards produced. ... There are add-on cards that will monitor all kinds of parameters from the ISA or PCI buss, and sound alarms or make other corrective measures to safeguard the system. ... These cards are essentially computers themselves, built for a specific purpose, and I believe that they do output reports, or at least logged diagnostic parameters into their own memory, which could be printed out when desired. ...
    (rec.crafts.metalworking)