Re: Don't understand the Fax

bojimbo26@xxxxxxx wrote:
On Fri, 24 Aug 2007 22:50:16 -0400, "Pete" <pete@xxxxxxxxxx> wrote:

Hi everyone,

Please excuse my ignorance but I have been through all the help in
the fax console and it is a bit too confusing to me. I don't want
to do anything complicated (just want to be able to send and receive
a fax). I tried to have someone send me a fax today and I kept
getting error messages (probable because I hit receive fax now and
my device is set to auto). I also unblocked the firewall and that
did not help (should you leave the firewall on - it says disabling
it could be risky for receiving messages over the "Internet or
network". Aren't all faxes sent over some kind of network - again
excuse my ignorance.

Besides the firewall question could someone please put in plain
English what the differences in the three types of received faxes
are and which one do I want (I have pasted them below). I only have
one phone line and I assume the fax console has to be activated for
any faxing to take place (either sending or receiving) including the
automatic feature for receiving.

Here are the three types -

Receiving faxes
Incoming fax calls to a local fax device can be answered in a number
of ways:

a.. Automatic answering. You can specify that a ringing line for an
incoming fax call should be answered automatically by your computer.
You can also indicate how many times the fax line should ring before
the computer automatically answers an incoming fax call. The value
can be between 1 and
99. This option is useful if you have a line dedicated to fax calls.
b.. Manual answering. You can specify that a ringing line for an
incoming fax call should be answered manually. You will be informed
of an incoming fax call in accordance with your notification
settings, and you can choose to answer the call. For more
information, see About monitoring and notifying. This option is
useful if you have a fax device sharing a voice line.
c.. Receive a fax now. You can use this option if you need to
answer an incoming fax call when the line is not ringing. For
instructions, see Receive a fax now.
Please explain the differences. For instance what does use the
receive fax now when "you need to answer an incoming call when the
line is not ringing" mean. And why is the manual option useful if
you have a fax device sharing a voice line (which I do). And why
can't I just leave it on auto if I am planning on receiving a fax
and just let it go. I just don't understand it all. I understand I
will lose any real phone calls if the fax console is activated and
the device picks up on the second ring - but it appears that my
verizon voice mail would at least kick in and let the person leave a
message (I tested it by calling my land line from my cell phone when
the fax console was activated). Please do the best you can in
shedding some light on this.

Thanks...Pete


Don`t forget , you can only send fax`s through dial-up not broadband .

I know that, and I have a land line (dial up) connected to my pc in addition
to my cable modem. The fax kicks in automatically after the second ring (if
you have it set for the second ring), when the phone rings and you have the
fax console activated. Please see my comments back to Don also. I am still
looking for answers to my questions about the three types of fax receiving
that I asked about. Thanks...Pete


.

Relevant Pages

  • Re: Dont understand the Fax
    ... fax receiving that I asked about. ... Don...Additional info on the firewall. ... the fax console and it is a bit too confusing to me. ... Incoming fax calls to a local fax device can be answered in a number ...
    (microsoft.public.windowsxp.basics)
  • Re: Dont understand the Fax
    ... fax receiving that I asked about. ... Don...Additional info on the firewall. ... the fax console and it is a bit too confusing to me. ... Incoming fax calls to a local fax device can be answered in a number ...
    (microsoft.public.windowsxp.basics)
  • Re: Dont understand the Fax
    ... console and it is a bit too confusing to me. ... sending or receiving) including the automatic feature for receiving. ... incoming fax call should be answered automatically by your computer. ... You can specify that a ringing line for an incoming ...
    (microsoft.public.windowsxp.basics)
  • Re: Dont understand the Fax
    ... the fax console and it is a bit too confusing to me. ... any faxing to take place (either sending or receiving) including the ... Incoming fax calls to a local fax device can be answered in a number ... The fax kicks in automatically after the second ring (if ...
    (microsoft.public.windowsxp.basics)
  • Dont understand the Fax
    ... console and it is a bit too confusing to me. ... sending or receiving) including the automatic feature for receiving. ... incoming fax call should be answered automatically by your computer. ... You can specify that a ringing line for an incoming ...
    (microsoft.public.windowsxp.basics)