Re: how to pause or freeze a quickly flashing screen?
- From: "Phil Weldon" <notdiscosed@xxxxxxxxxxx>
- Date: Sat, 07 Apr 2007 03:32:24 GMT
'Bevy_Jeter' wrote, in part:
| I've not tried to follow the above screen text because when I took my PC
to
| a help counter person and they plugged it in, my problem did not happen &
the
| PC worked just fine.
_____
There is another difference between test locations. If a memory module,
plug-in card, or drive is not firmly socketed then movement could cause
intermittent faults when the system is moved. In fact, that is a MUCH more
likely cause than the difference in operating environment. Disconnect the
AC power cord and remove then reseat all memory module, plug-in card, and
drive connectors. This has a good chance of clearing up the problem. If
you don't feel comfortable with this procedure, take it to a reliable
computer service center. Probably not the one you already used since they
evidently did not check for proper seating of removable components.
Phil Weldon
"Bevy_Jeter" <BevyJeter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E8786858-33C7-4D6E-B404-22C47A063A53@xxxxxxxxxxxxxxxx
| I've tried unsuccessfully the following keys: Pause/Break, Esc,
ctl/break.
| I've also tried unsuccessfully to capture the screen using: print screen
&
| ctl/c.
|
| I did finally see the screen by continually pressing F8 key after booting
| until the "Advanced Startup Options for Windows" screen displayed whereby
I
| selected "Disable Auto restart on system failure" & then the blue screen
with
| text displayed & stopped during the display whereby I was able to read the
| text, but the screen did not give me a means to advance past that screen,
so
| I powered off. The following is the text from that blue screen:
|
| "A problem has been detected & windows has been shut down to prevent
damage
| to your computer. If this is the 1st time you've seen this stop error
| screen, restart your computer. If this appears again, follow these steps:
| Run a system diagnostic utility supplied by the hardware manufacturer. In
| particular, run a memory check, & check for faulty or mismatched memory.
Try
| changing video adapters. Disable or remove any newly installed hardware &
| drivers. Disable or remove any newly installed software. If you need to
use
| Safe Mode to remove or disable components, restart your computer, press F8
to
| select Advanced Startup Options, & then select Safe Mode. Technical
| information: Stop. Oxoooooo7F ox00000000 0x00000000 0x00000000
ox00000000.
| Beginning dump of physical memory."
|
| I've not tried to follow the above screen text because when I took my PC
to
| a help counter person and they plugged it in, my problem did not happen &
the
| PC worked just fine. But when I took the PC home & turned it on, my same
| problem repeats. I've tried to figure why this happens. The only
difference
| is that the help counter did not use my power cord, they used their's. So
I
| took my power cord to a help counter where they tested the cord & stated
the
| cord is ok. Anybody got a suggestion as to why different results?
|
| The device manager does not show any conflicts/problems.
|
|
| Thank You, Bevy_Jeter
|
|
| "philo" wrote:
|
| >
| > "Bevy_Jeter" <BevyJeter@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
| > news:E0A2021A-DAAA-4685-92D6-4293C699C06A@xxxxxxxxxxxxxxxx
| > > How do I pause or freeze a quickly flashing then disappearing screen
so
| > that
| > > I can read the contents before it vanishes? I've tried using the
| > Pause/Break
| > > key on the keyboard, but that doesn't work. Is their a function key
or
| > > combination of keys that might work? PC has Intel P4 motherboard.
| >
| >
| >
| > try the esc key
| >
| >
| >
.
- Follow-Ups:
- References:
- Prev by Date: Re: how to pause or freeze a quickly flashing screen?
- Next by Date: Re: Right-click associations messed up?
- Previous by thread: Re: how to pause or freeze a quickly flashing screen?
- Next by thread: Re: how to pause or freeze a quickly flashing screen?
- Index(es):
Relevant Pages
|
