Re: win xp home cd does not detect hard drive while on setup phase.

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



My maxstore hd sata required no floppy to work proper. Just pluged in and it
worked.




"Nepatsfan" <nepatsfan@xxxxxxxxxxx> wrote in message
news:ezsvYpQaHHA.3272@xxxxxxxxxxxxxxxxxxxxxxx
In news:56F90E9A-71D7-47C2-99D0-1B119B18C592@xxxxxxxxxxxxx,
GG <GG@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Greetz,
i accidently deleted the primary/ active partition on my new compaq
nx6310 )this laptop is shipped with no ms operating system(win xp
home edition herein.) how can i partition and format the drive to
install win xp home edition?
facts:
when i insert the win xp home cd into cdrom, it boots and load all
the files prior to installation, in this phase, win setup can not
detect the hard drive and thus the installation is aborted.
i do not have neither floppy drive nor win xp home bootable discs.
kindly advise.

The first part of your question is a little confusing.
How exactly did you delete the system partition on your laptop?
Also, what exactly does "this laptop is shipped with no ms operating
system(win xp home edition herein.)" mean?
Are you saying that Windows wasn't installed on the laptop or that they
didn't supply you with an installation CD?

Your laptop probably has a SATA hard drive. To install Windows XP on a
SATA hard drive you have to provide the correct drivers on a floppy disk
when you come to the screen where it says at the bottom "Press F6 if you
need to install a third party SCSI or RAID driver...". Since you don't
have a floppy drive, you're stuck.

Note: I don't know if it's possible to use a USB floppy drive to provide
the SATA drivers during installation. I've seen references to the ability
to integrate the drivers into your installation CD but I have never tried
it.

Since this is a new laptop, I suggest you contact HP's tech support and
ask them for assistance in installing XP.

Good luck

Nepatsfan





.



Relevant Pages

  • Re: please help with Toshiba 23oCX problem, please.
    ... i used the setup.exe switches /im "skip check for low Conventional ... >> I'm working with a friend's laptop, ... >> floppy in it within Windows, ... >> the correct installation sequence. ...
    (uk.comp.sys.laptops)
  • Re: Setup cannot copy the file si3112r.sys
    ... I hit F6 at the beginning of the installation. ... Then I pick the sata driver for xp. ... On an ASUS A7N8X-E Deluxe MB we've been working with, our SATA floppy disk ...
    (microsoft.public.windowsxp.general)
  • Re: installing 10.1 on old laptop
    ... laptop instead of using the floppy drive to boot the laptop as I cannot ... configure the floppy to be bootable with grub or lilo. ... still have enough space for an installation. ... You will need to edit the partition as not to ...
    (alt.os.linux.suse)
  • Re: please help with Toshiba 23oCX problem, please.
    ... Once the battery was replaced ... from the floppy so I sourced a replacement floppy from promaxim.co.uk, ... As far as I know the laptop is still in use. ... > the correct installation sequence. ...
    (uk.comp.sys.laptops)
  • Re: Fatal: First sector of /dev/hda1 doesnt have a valid boot signature
    ... > Thank you, but unfortunately, I don't have a floppy ... > drive with my laptop. ... And of course you have tried booting from your XP installation CD ...
    (RedHat)