Re: Boot problems
- From: RB <RB@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Sat, 9 Dec 2006 09:16:01 -0800
The problem has beeen occurring for the past few weeks. Previously bootup
was fast and straightforward. Let me say that I appreciate your assistance
very much.
Here are the answers to your questions:
I received the computer from the store and do not know how the original
partitions were created or what utility was used (wouldn"t it have been the
Windows insallation disk?)
I don't know why the file system is formatted as FAT32. Could it have
something to do with the mother board?:
Board: Intel Corporation D101GGC AAD35788-304
Serial Number: BTGC54813167
Bus Clock: 133 megahertz
BIOS: Award BIOS for Intel GC11010N.86A.0304.2005.1108.2115 11/08/2005
The following is the chkdsk report for the two drives (on the same disk);
chkdsk C:\
The type of the file system is FAT32.
Volume Serial Number is 90FC-8D3D
Windows is verifying files and folders...
Windows found errors on the disk, but will not fix them
because disk checking was run without the /F (fix) parameter.
\WINDOWS\Prefetch\CHKDSK.EXE-2CC4C59D.pf first allocation unit is not
valid. The entry will be truncated.
The size of the \WINDOWS\system32\config\software.LOG entry is not valid.
File and folder verification is complete.
Windows found problems with the file system.
Run CHKDSK with the /F (fix) option to correct these.
30,709,264 KB total disk space.
366,752 KB in 1,754 hidden files.
84,272 KB in 4,873 folders.
11,458,256 KB in 106,035 files.
18,799,968 KB are available.
16,384 bytes in each allocation unit.
1,919,329 total allocation units on disk.
1,174,998 allocation units available on disk.
chkdsk d:\
The type of the file system is FAT32.
Volume Serial Number is 6E7E-38AD
Windows is verifying files and folders...
File and folder verification is complete.
Windows has checked the file system and found no problems.
47,412,256 KB total disk space.
1,390,528 KB in 121 hidden files.
34,848 KB in 1,081 folders.
3,371,648 KB in 13,268 files.
42,615,200 KB are available.
32,768 bytes in each allocation unit.
1,481,633 total allocation units on disk.
1,331,725 allocation units available on disk.
"Gerry Cornell" wrote:
RB.
How were the original partitions created and what utility was used to format
the drive as FAT32?
What cluster size is reported by chkdsk? How many cluster are there in each
partition?
Limitations of the FAT32 File System in Windows XP
http://support.microsoft.com/?kbid=314463
Why was the disk formatted as FAT32 rather than NTFS?
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
"RB" <RB@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:929532E0-3A5F-4AE8-B64D-925EECD69FE6@xxxxxxxxxxxxxxxx
As the computer is barely one year old I would be surprised if there were
hardware problems but I am attaching the HDTune analyses you requested.
I am more inclined to think that I have some software conflict but so far
have not found anything.
As I mentioned, startup is successful on restart as after entering safe
mode or in the course of working in normal mode. The problem seems to
occur
mainly when stating up after the computer has been shut down.
My hard drive is Western Digital model WDC WD800JD-00LSA0 divided up into
c:
(FAT32 on drive 0) 31.45 GB 19.28 GB free
d: (FAT32 on drive 0) 48.55 GB 43.64 GB free
____________________________________________________________________
Here is the HDTune Info tab:
HD Tune: WDC WD800JD-00LSA0 Information
Firmware version : 06.01D06
Serial number : WD-WMAM9F137823
Capacity : 74.5 GB (~80.0 GB)
Buffer size : 8192 KB
Standard : ATA/ATAPI-7 - SATA II
Supported mode : UDMA Mode 6 (Ultra ATA/133)
Current mode : UDMA Mode 5 (Ultra ATA/100)
S.M.A.R.T : yes
48-bit Address : yes
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Management: yes
Power Management : yes
Advanced Power Management : no
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes
Partition : 1
Drive letter : C:\
Label :
Capacity : 30004 MB
Usage : 38.77%
Type : FAT32
Bootable : Yes
Partition : 2
Drive letter : D:\
Label :
Capacity : 46312 MB
Usage : 10.14%
Type : FAT32
Bootable : No
______________________________________________________________________
Here is the health tab:
HD Tune: WDC WD800JD-00LSA0 Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 200 200 51 0 Ok
(03) Spin Up Time 197 171 21 1108 Ok
(04) Start/Stop Count 100 100 0 752 Ok
(05) Reallocated Sector Count 200 200 140 0 Ok
(07) Seek Error Rate 200 200 51 0 Ok
(09) Power On Hours Count 95 95 0 3934 Ok
(0A) Spin Retry Count 100 100 51 0 Ok
(0B) Calibration Retry Count 100 100 51 0 Ok
(0C) Power Cycle Count 100 100 0 752 Ok
(BE) (unknown attribute) 61 47 45 39 Ok
(C2) Temperature 104 90 0 39 Ok
(C4) Reallocated Event Count 200 200 0 0 Ok
(C5) Current Pending Sector 200 200 0 0 Ok
(C6) Offline Uncorrectable 200 200 0 0 Ok
(C7) Ultra DMA CRC Error Count 200 200 0 0 Ok
(C8) Write Error Rate 200 200 51 0 Ok
Power On Time : 3934
Health Status : Ok
______________________________________________________________________
Here is the error checking report:
HD Tune: WDC WD800JD-00LSA0 Error Scan
Scanned data : 76288 MB
Damaged Blocks : 0.0 %
Elapsed Time : 33:31
"Gerry Cornell" wrote:
RB
An explanation of the new /C and /I Switches that are available to use
with
Chkdsk.exe
http://support.microsoft.com/kb/314835
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/chkdsk.mspx?mfr=true
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/bootcons_chkdsk.mspx?mfr=true
I would try HD Tune (freeware).
Download and run it and see what it turns up.
http://www.hdtune.com/
Select the Info tabs and place the cursor on the drive under Drive letter
and then double click the two page icon ( copy to
Clipboard ) and copy into a further message.
Select the Health tab and then double click the two page icon ( copy to
Clipboard ) and copy into a further message.
Also do a full surface scan with HD Tune.
What is the make and model of the hard drive?
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
..
"RB" <RB@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DD25DFC5-2CB1-474B-A39B-BB3FFA8AE9DE@xxxxxxxxxxxxxxxx
Chkdsk seemed to help, although the boot process still sems longer than
it
used to be. I also don't quite understand chkdsk and hope you will be
kind
enough to explain it. When I ran it from a command line window it
found
numerous errors, mostly of the nature of "first allocation unit is not
valid,
file will be truncated". Then I ran it with /f in order to cause it to
run
on
boot, which it did. But when I then again ran chkdsk from a command
line
window it again found these numerous errors. Does the autochk that
runs
with
boot-up also repair errors or does it just report them? It is hard to
see
what it does because it doesn't give you enough time to read the
results
but
immediately disappears. Then I ran autochk a second time and then
running
chkdsk inside windows reported many fewer entries of first allocation
unit
not valid, but the result still said "windows found problems with the
file
system, run chkdsk with /f to repair". What is all this about and how
can
I
fix the errors now that we no longer have the option of a dos bootup
for
tasks like this?
Many thanks.
P.S. Sorry if I have been a bit long winded but I spent quite abit of
time
trying to sort this out and would like to try and understand what is
happening.
"Gerry Cornell" wrote:
RB
Have you tried to run chkdsk?
http://support.microsoft.com/kb/315265
As you are having problems involving your C drive you will need to
reboot,
which may or may not cause problems. The tool runs before booting to
the Desktop. I did wonder whether improper shutdowns were causing
this tool to automatically run. Running chkdsk can take some time but
I think you might have noticed it if it was running.
Please let me know how you get on.
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
"RB" <RB@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:0181DC3D-7ED2-433B-AAE4-3B6EA8534119@xxxxxxxxxxxxxxxx
No, that is not what I am saying. The problem is in normal mode.
Entering
safe mode and then restarting permits successful booting into normal
mode.
But when it gets stuck in the initial boot into normal mode (when I
first
switch on) no events are created presumably because the system gets
stuck
at
a stage before any event can be logged. In fact now I realize that
the
problem only occurs when I power up the computer after complete
shut-down.
Performing restart afterI am logged in works fine with no problem.
I checked the device manager and startup programs and did not see
anything
out of the ordinary.
Thanks.
"Gerry Cornell" wrote:
RB
Are you saying that the problematic is in Safe Mode rather than
Normal
Mode?
Can you post a copy of the Report listing the drivers?
Are there any yellow question marks in Device Manager? Right click
on
the My Computer icon on your Desktop and select Properties.
Hardware,
Device Manager. If yes what is the Device Error code?
--
Hope this helps.
Gerry
~~~~
FCA
Stourport, England
Enquire, plan and execute
~~~~~~~~~~~~~~~~~~~
"RB" <RB@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:091F5026-4218-4750-B494-4295F18AFBD4@xxxxxxxxxxxxxxxx
The startup process does not seem to have proceeded sufficiently
to
generate
an event.
Here is what I have in the system log, none of the other logs
appear
to
have
anything relevant:
Type of Event: Information
Origin of Event: EventLog
- Follow-Ups:
- Re: Boot problems
- From: Gerry Cornell
- Re: Boot problems
- References:
- Re: Boot problems
- From: Gerry Cornell
- Re: Boot problems
- From: RB
- Re: Boot problems
- From: Gerry Cornell
- Re: Boot problems
- From: RB
- Re: Boot problems
- From: Gerry Cornell
- Re: Boot problems
- From: RB
- Re: Boot problems
- From: Gerry Cornell
- Re: Boot problems
- From: RB
- Re: Boot problems
- From: Gerry Cornell
- Re: Boot problems
- Prev by Date: Help:Double-click action changed to "search"
- Next by Date: Re: Help:Double-click action changed to "search"
- Previous by thread: Re: Boot problems
- Next by thread: Re: Boot problems
- Index(es):
Relevant Pages
|
