Re: USB 2.0?

Right-click My Computer > Properties > Hardware tab > Device Manager, scroll
down to Universal Serial Bus Controllers, right click one of the controllers
listed. Select Properties. If you see ?USB 2.0 or ?Enhanced?, then you have
USB 2.0

Pete wrote:

x-no-archive: yes

How can I tell if my machine has USB 2.0 or 1.0? I need to add a printer,
and it will only run on 2.0. Thanks in advance.
-Pete

.

Relevant Pages

  • Re: My USB SP2 fix
    ... I have 6 USB devices that were connected to this PC before the SP2 update ... Class: Universal Serial Bus controllers ... Device Drivers: ...
    (microsoft.public.windowsupdate)
  • Re: USB Hard Drive loses its USB connection constantly
    ... Each device is on it's own USB port. ... Class: Universal Serial Bus controllers ... No resources used. ...
    (microsoft.public.windowsxp.general)
  • Finding an updated XP driver for USB 1.1 port
    ... Im at the current maintenance level for IBM and Microsoft. ... The Universal Serial Bus Controllers and Standard Universal PCI to USB ...
    (microsoft.public.windowsxp.hardware)
  • Re: Motherboard Manual - KOB 693 DCS
    ... following under Universal Serial Bus controllers: ... # USB Root Hub ... # VIA Rev 5 or later USB Universal Host Controller ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: How do I fix a Vista WMI EventID 10 problem?
    ... I have tried your suggestion but it does not resolve my problem. ... The easiest way to solve a error code 10 in Windows Vista is to follow the steps below to remove and reinstall all USB controllers. ... F. Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time. ... TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > ...
    (microsoft.public.windows.vista.general)