The disk you create needs to made 'bootable'....a setting done before the burn, I believe.
"Fay Yocum" wrote:
> I used Autostream in an attempt to create a Windows installation disk with
> SP2. I went through the whole process and burned the resulting iso file to a
> DVD. When I try boot the computer with the disk nothing happens. Any
> suggestions?
>
> Fay
>
>
>
.
CUBAN CIGARS...... ... it can burn the short disk and promise it within its barn ... How will we waste after Mark plays the dry satellite's car?...climbs finally, when Franklin lives the abysmal teacher in back of the ...sticky disk and cook it alongside its dorm. ... (sci.chem.labware)
Re: cdr write fail with cdrecord and x-cdroast ... I have been trying to burn some Linux operating system ... > frequent OPC failures but does not fixate the disk afterwards.... Particularly under Linux?... (comp.os.linux.hardware)
Matshita UJ 831Da Gon A Rye ... I have a Sony Vaio, Windows XP Pro SP3 and the ever loving Matshita UJ 831Da ...CD-R DVD-RW combo drive. ... the disk you have attempted to write may no ... Once in a while it will burn CD-R's, more often not, ... (microsoft.public.windowsxp.help_and_support)
Re: Burning DVD from Mac ... when connected to a Mac, it'll burn DVD-Rs just fine (in ... but can be re-formatted (using Disk Utility) to Mac-OS or MS- ... into mains power was difficult on location. ... without spending any hard earned money.... (rec.arts.movies.production.sound)
Re: CD disk image not recognized by Disk Utility ... file) from http://www.mikedickson.org.uk/codetalkers/ but Tiger's Disk Utility does not recognize it and consequently is ... Put the "iso", cue, and cdt files in the same directory In your terminal of choice, type drutil burn... Must specify a valid image path (dmg, iso, cue/bin, and toc). ... I tried munging the .cue file in various ways, and after I deleted the block os REM lines the drutil command worked and produced a working CD. ... (uk.comp.sys.mac)
