Re: Xp Reload failure

From: Jane (anonymous_at_discussions.microsoft.com)
Date: 03/02/04


Date: Tue, 2 Mar 2004 08:17:49 -0800

Thank you so much for your sympathy, as well as the
information. My son was only 22 and had a brilliant
career ahead of him. An 18 year old on drugs entered an
exit ramp on the interstate and hit my son head-on,
killing him instantly. Our family is completely
devastated.
Your information is a lot of help. Thankfully, I
remembered my son learned just about everything he knew
about computers by asking questions in newsgroups, so
here was the only place I could think of to go.
I had a feeling that she would definitely have to
reformat the drive. Another question though.... since her
drive is already partitioned, could I just try to
reformat that partition and try to install XP on that
one, or when you format, do you have to format the whole
drive? Thanks again for your information. Jane

>-----Original Message-----
>Such a message indicates the setup is too corrupted for
a reinstall or
>repair install. Setup simply won't go any further
unless you format,
>something you can do from XP setup:
>
>Assuming your system is set to boot from the CD-ROM
drive, boot with the XP
>CD in the drive. If it isn't or you are not sure, you
need to enter the
>system's BIOS. When you boot the system, the first
screen usually has
>instructions that if you wish to enter setup press a
specific key, when you
>see that, do so. Then you will have to navigate to the
boot sequence, if
>the CD-ROM drive is not first line, set it first in the
boot sequence. Save
>your settings and exit with the XP CD in the drive. The
system will reboot.
>
>A few screens into the boot process, if you see the
message on the boot
>screen to "Press any key in order to boot from the CD,"
do so.
>
>After loading drivers and files, you should be taken to
a screen with
>the following:
>
>To Setup Windows XP now, press ENTER.
>To Repair a Windows XP Installation using Recovery
Console press R.
>To Quit setup without installing Windows XP, press F3.
>
>In your case, press ENTER.
>
>Agree to the License agreement by pressing F8.
>
>You will then be taken to a screen with two options.
>
>To repair the selected Windows XP installation press R.
>To continue installing a fresh copy of Windows XP
without repairing,
>press ESC.
>
>This will bring you to a partition map where you
>can delete, create and format partitions.
>Select the drive you wish to format, delete the
partition, then create a new
>partition, format as desired and continue with XP
installation.
>
>I am terribly sorry about the loss of your son, please
accept my sympathies.
>
>--
>Michael Solomon MS-MVP
>Windows Shell/User
>Backup is a PC User's Best Friend
>DTS-L.Org: http://www.dts-l.org/
>
>"Jane" <anonymous@discussions.microsoft.com> wrote in
message
>news:8A7B255C-E5F6-45B1-B8B1-
0E12BF59FF24@microsoft.com...
>> My son was the computer person in the family. He
installed XP on my
>> computer as well as other members of the family's
computers. He was killed
>> in an auto accident last year, so I have no support
for my computer
>> problems. My niece began having a problem with her Xp.
It would go to the
>> page where you can start windows in safe mode, safe
mode with command
>> prompts, or latest successful configuration. I believe
there was one other
>> thing you could select, but I just can't remember it
right now. Anyway,
>> she tried to start windows with each of those
selections, but they just
>> kept looping back to the same page and no further. I
found the XP disc and
>> she used it to try to load XP back onto the computer,
She went so far,
>> then a screen stated that she would have to reformat
her hard drive before
>> it could be installed. It said the computer was either
full, and several
>> other reasons that could cause it not to load. Is
there anything else we
>> can try before completely reformatting her drive. She
has so much
>> stuff....... and of course , not backed up. I don't
even know how to do
>> that, either. Could you help, please?
>
>
>.
>



Relevant Pages

  • Re: How to grt rid of dual boot XP??
    ... Win2K to an existing WinXP installation; in my experience, ... The computer probably would not boot until the error is corrected. ... Microsoft Windows MVP ... "Ron Sommer" wrote in message ...
    (microsoft.public.windowsxp.general)
  • Re: Winntsys32configsystemCED Error
    ... First thing to do is to boot the computer and see if you can launch the Recovery Console and access the Windows 2000 installation. ... If, on the other hand, you are sure that you are properly logged on to the Windows installation and can't rename, copy between folder or delete files and are getting error messages, or if the "fixed" installation doesn't want to boot, chances are that there is corruption on the disk and you will have to do the chkdsk to try to overcome the problem. ... One thing that still hangs in my mind that you touched on was running ckkdsk /r, since Dell could not do anything with it, was to run this as the first option rather than the latter. ...
    (microsoft.public.win2000.general)
  • Re: Entry point not found
    ... Open Explorer, go to Tools and Folder Options, on the view tab, scroll to ... I have a brand new hard drive so I'm> thinking of just installing it, re-loading Windows from> scratch and then hook up my old drive as a slave ... As>>far as I can tell, the only way around this would be to> try a clean install>>which entails wiping the drive of all information> currently on it and>>proceeding with setup, this can be done from XP setup as> follows and as>>noted, this will cause you to lose everything on the> partition to which you>>are trying to install XP:>>Assuming your system is set to boot from the CD-ROM> drive, boot with the XP>>CD in the drive. ... >>To Repair a Windows XP Installation using Recovery> Console press R.>>To Quit setup without installing Windows XP, ...
    (microsoft.public.windowsxp.accessibility)
  • Re: Windows XP Home stalls during boot
    ... Assuming your system is set to boot from the CD-ROM drive, ... A few screens into the boot process, if you see the message on the boot ... To Setup Windows XP now, ... To Repair a Windows XP Installation using Recovery Console press R. ...
    (microsoft.public.windowsxp.accessibility)
  • Re: How to grt rid of dual boot XP??
    ... Troubleshooting Windows XP ... >> Then go to the Boot.ini Tab and click on Check All Boot Paths. ... >> This will give you the current Windows folder you are using. ... delete the folder containing the installation you want to ...
    (microsoft.public.windowsxp.general)