Re: XP HOME BOOT FAILURE
From: Michael Solomon \(MS-MVP Windows Shell/User\) (user_at_#notme.com)
Date: 09/13/04
- Next message: Michael Solomon \(MS-MVP Windows Shell/User\): "Re: Another user"
- Previous message: Dave: "Unable to access most if not all windows programes"
- In reply to: Hoa: "Re: XP HOME BOOT FAILURE"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 13 Sep 2004 12:44:30 -0700
Start by booting to safe mode and seeing if you can scan for viruses and
malware. Boot the system, start tapping F8, when the menu appears, select
Safe Mode and press enter. Once in Safe Mode, make sure your antivirus
software is up to date and scan your system. Check for malware with Ad
Aware, download install and run the application:
www.lavasoftusa.com.
If your system is clear of viruses and malware, go to www.dougknox.com, in
the left frame, click WinXP Fixes, from the list find, "Restore Default File
Associations Easily," click and follow the instructions.
-- Michael Solomon MS-MVP Windows Shell/User Backup is a PC User's Best Friend DTS-L.Org: http://www.dts-l.org/ "Hoa" <htle1955@istop.com> wrote in message news:e3lngnTmEHA.948@TK2MSFTNGP12.phx.gbl... > Hi there, > > 1) I was able to get "Event Viewer" but when I highlighted the rows > containing errors or warning, etc. I was not able to click on the > "photocopy/double copy" button located below the Down arrow button, nor > was > I able to click the button called "Export to". I was trying to export the > whole Event Viewer log to Outlook Express mail/WinXP newsgroup so that > Michael and others can take a look and help me further. I cannot see OE > as > a choice to export to. > > 2) Selecting Start>Help&Support>System>SysInfo>Advanced System Info, I was > able to get the Error Log from my system as summarized below (My apology > for > the appearance of the info because I have not re-installed Word 2002 and > Excel 2002 and since the Event Viewer window does not have any File Print > feature): > > DATE-TIME---SOURCE---DESCRIPTION > > Sept.7-NetBT-Initialization failed 'cause driver device could not be > created. > > Sept.7-NtServicePack-XP hotfix migration failed, leaving win XP partially > updated. See C:\WINDOWS\xpsp1hfm.log for more details. > > Sept.9-ServiceControl Mgr-The DgiVecp service failed to start due to > following error: system cannot find the file specified. > > Sept.9-Service Control Mgr-Application Management Service terminated with > the following error: Specified module could not be found. > > Sept.10-Service Control Mgr-DgiVecp service failed to start....(same > reason > as above). > > Sept.11-Service Control Mgr-DgiVecp failed to start... > > Sept.11-IdeChnDr-The device,\Device\Ide\IdeDeviceP0T1L0, did not respond > within timeout period. > > Sept.12-IdeChnDr-(Same) Device did not respond within timeout period. > > Sept.12-Service Control Mgr-DgiVecp service failed to start 'cause system > cannot find the file specified. > > Sept.9-Application Error-Faulting application select.exe, version 0.0.0.0, > faulting module select.exe, version 0.0.0.0, fault address 0x0005b414. > > Sept.9-Dr. Watson-F:\Bin\Select.exe generated an application error. The > error occurred on 09/09/2004 @05:57:15. The exception generated was > c0000005 at address 0045B414 (SELECT!). > > Sept.9-Application Error- Faulting application select.exe, version > 0.0.0.0, > faulting module select.exe, version 0.0.0.0, fault address 0x0005b414. > > Sept.9-Application Erro-Fault bucket 59544770. > > I also defragged both hard disks and ran Norton Antivirus 2004 as recently > as this afternoon but there were no infected files. In the last few days, > whenever I turn on the computer, POST is OK, then Win XP screen came on, > some disk reading noises then a blank blue screen comes up, stays for > 5-10+ > minutes before the Welcome screen appears. > > 3) I am also in need of moving some applications from the old 80 Gb hard > drive (D:\) to the new 120 Gb drive (C:\), and removing some other > redundant > applications from the old one, but the Add/Remove Application feature does > not show me or the computer the disk location of the folders to be > removed. > A specific example is I want to un-install the old nVIDIA driver for > GEForce4 MMX440 SE video card from the 80 Gb drive and install a more > up-to-date driver on the 120 Gb drive. How should I do this safely? My > ultimate goal is to use the 80 Gb drive for OSes and ashared data (FAT32) > drive, and the 120 Gb drive for WinXP applications and data. > > 4) In terms of partitioning, should each hard drive have separate > partitions > for OS, applications and data/documents? > > 5) In terms of a time and cost effective solution, should I just buy the > full version or upgrade version of XP Pro and start from scratch, i.e. > re-format the hard disks, install the OS(es) and re-installing each > application, instead of trying to figure out the root of the problem with > my > current XP Home system? > > I look forward to hearing from you folks. Thanks a lot for your help. > This > experience has an upside in that it makes me more informed as a computer > user. > > > -- > Hoa > leth5591<removethis>@gmail.com > > "Beer is living proof that God loves us and wants us to be happy" > Benjamin Franklin > > "Michael Solomon (MS-MVP Windows Shell/User)" <user@#notme.com> wrote in > message news:%239o9fTqlEHA.3016@tk2msftngp13.phx.gbl... >> A blue screen of death, BSOD, almost always means some sort of hardware >> issue. It doesn't necessarily mean the hardware is bad but it might mean >> you just need updated drivers. It might be SP2 but given the problems > begin >> before you get to the desktop, it would seem to be hardware related. One >> thing you should do is check the computer manufacturer's website for any >> issues or updates with regard to SP2. As to the error message you > received, >> if you added SP 1 as an update and then used your pre-SP1 CD to install > over >> itself, the system wouldn't find all the necessary files, hence the >> instruction you saw. A repair install should bypass that but it will >> take >> the system back to pre-SP1 state. I'll post the repair install > instructions >> at the bottom. If you can get to the desktop, the information below may >> help: >> >> Assuming you are able to boot to the desktop, here are some other things > you >> can do that might help disgnose as well as possibly fix the problem: >> If your system is clear of viruses, open Control Panel, open System, go >> to >> the Advanced tab, click Settings under Startup and Recovery, remove the >> check from "Automatically Restart" under System Failure. This will cause >> the system to blue screen instead of restarting on errors and the >> information on the blue screen may give a clue as to the source of the >> issue. >> >> Open Control Panel, open Administrative Tools, open Event Viewer, look >> for >> errors corresponding to the crash, double click the error, the >> information >> contained within may give a clue as to the >> source of the problem. If you don't understand the information inside, > the >> third button down in that dialog box will copy the information, >> you can then paste it into a message and post it here and maybe we can >> figure out what is going on. >> >> Assuming you have an XP CD and not a recovery CD, place the XP CD in the >> drive, when the setup screen appears, select "Check System >> Compatibility," >> the report it generates may point to problem hardware or software on your >> system. If you do not have an XP CD, you can download this application >> known as the Upgrade Advisor from the following site: >> http://www.microsoft.com/windowsxp/pro/howtobuy/upgrading/advisor.asp >> Note: If you have access to a broadband connection it might be best to >> download using that as this is a rather large download. >> >> Check for the latest drivers for your hardware, especially your graphics >> card and soundcard and all peripherals connected to your system. Do not > use >> Windows Update for this, go to the device manufacturer's web sites and if >> you install updated drivers, ignore the message about drivers being > unsigned >> by Microsoft. *Before installing any drivers, be sure you are well >> backed >> up and it's probably a good idea to manually create a restore point in >> System Restore in case you have problems as a result of the driver update >> and note, System Restore is not a substitute for a backup. Start\All >> Programs\Accessories\System Tools\System Restore >> >> REPAIR INSTALL >> NOTE, while a repair install should leave your data files intact, if >> something goes wrong during the repair install, you may be forced to >> start >> over and do a clean install of XP. If you don't have your data backed >> up, >> you would lose your data should that eventuality occur. >> >> Assuming your system is set to boot from the CD-ROM drive and you have an >> actual XP CD as opposed to a recovery CD, boot with the XP >> CD in the drive and perform a repair install as outlined below. If the >> system isn't set to boot from the CD or you are not sure, you need to > enter >> the system's BIOS. When you boot the system, the first screen usually >> has >> instructions that if you wish to enter set press a specific key, when you >> see that, do so. Then you will have to navigate to the boot sequence, if >> the CD-ROM drive is not first line, set it first in the boot sequence. > Save >> your settings and exit with the XP CD in the drive. The system will > reboot. >> >> When the system boots, a few screens into the process you may see a > message >> instructing you >> to hit any key in order to boot from the CD along with a countdown. When >> you see this be sure to >> hit a key on the keyboard, if you miss this instruction and the system > fails >> to boot from the CD, it's too >> late, you'll need to reboot and try again. >> >> Once you have pressed a key, setup should begin. You will see a >> reference >> asking if you need to load special drivers and another notice that if you >> wish to begin the ASR (Automatic Recovery Console) depress F2. Just let >> setup run past all of that. It will continue to load files and drivers. >> >> Then it will bring you to a screen. Eventually, you will come to a >> screen >> with the option to (1) setup Windows or (2) Repair Windows Installation >> using the Recovery console. ***The selection you want at this screen is >> "Setup Windows," >> NOT "Repair Windows Installation. >> >> The first option, to setup Windows is the one you want and requires you >> to >> press enter. When asked, press F8 to accept the end user agreement. > Setup >> will then search for previous versions of Windows. Upon finding your >> version, it will ask if you wish to Repair your current installation or >> install fresh. Press R, that will run a repair installation. From there >> on, follow the screens. >> >> Note, in some cases, you won't receive the repair option, only an option > to >> reinstall. We have discovered that sometimes this is caused by damaged >> boot.ini file that can be repaired as follows and also note, in the >> instructions, "K" refers to the CD drive in which you have placed the XP > CD, >> replace that drive letter with the appropriate letter on your system, "K" > is >> simply an example. >> >> Reboot, this time taking the immediate R option (this is the section I > told >> you to skip above. In this case, you will need to get to the Recovery >> Console to perform the function below), and if the CD letter is say K: > give >> these commands >> >> COPY K:\i386\ntldr C: >> COPY K:\i386\ntdetect.com C: >> (two other files needed - just in case) >> ATTRIB -H -R -S C:\boot.ini >> DEL C:\boot.ini >> BootCfg /Rebuild >> >> Once you've completed this function, reboot and see if you can access XP > as >> sometimes, the problem is the damaged boot.ini. If you still cannot > access >> XP, then reboot and re-run the repair install instructions at the > beginning >> of this message. >> >> If you only have a recovery CD, your options are quite limited. You can >> either purchase a retail version of XP which will allow you to perform >> the >> above >> among other tools and options it has or you can run your system recovery >> routine with the Recovery CD which will likely wipe your drive, deleting > all >> files but will restore your setup to factory fresh condition. >> >> >> >> -- >> Michael Solomon MS-MVP >> Windows Shell/User >> Backup is a PC User's Best Friend >> DTS-L.Org: http://www.dts-l.org/ >> >> "Hoa" <htle1955@istop.com> wrote in message >> news:O8dyTAqlEHA.2224@tk2msftngp13.phx.gbl... >> > Hello there, >> > I have Win XP Home SP1. I update it quite regularly. Recently I >> > experienced >> > an annoying problem described below: >> > Turned on computer. XP screen appeared and stayed for quite a long time >> > but >> > the Welcome screen did not show up. I pressed the reset button several >> > times >> > but nothing seems to happen. Eventually the screen message said to the >> > effect Win does not start correctly. I believe I chose the Safe Mode? >> > Still didn't work. I inserted the OS Cd to re-install XP. I then was >> > prompted to find a file called "usbehci.sys" in >> > "d:\drivers\usb2\winxp_sp1". >> > I couldn't find it anywhere so I ignored the prompt and chose Cancel. >> > I >> > was >> > then asked to insert Network Adapter Card. Same thing, so I either > chose >> > Cancel or Next. Could not connect to the Internet. BIOS booted > normally >> > but I could not go beyond the XP screen. The 3 green squares in the >> > address >> > window swept so slowly. I had to re-install XP quite a number of >> > times, >> > so >> > I almost gave up in frustration. I then called my brother who advised > me >> > to >> > insert the support CD that came with the ASUS P4XP-X Motherboard and >> > downloaded the LAN driver. Then I was able to get Win XP and Internet >> > connection. I then used Norton AV 2004 to scan for viruses, found >> > none. >> > Used Spybot SD to check for spywares, found none. My elation was >> > short-lived, since the next day I was not able to boot again. I took >> > the >> > computer to the store where I bought it last year for a check. They > found >> > nothing wrong with the hardware, and suggested that the 80GB hard drive > be >> > reformatted and XP re-installed. I had them install a new, second hard >> > drive (120 GB) and install XP on it. Everything worked fine when I get >> > home. However this morning I watched the blue screen of death. I had to >> > reboot and even then had to wait for 10 minutes before the Welcome > screen >> > appears. This afternoon same thing happened. Could the new problem be >> > due >> > to the SP2 that the store installed in my new hard drive? The computer >> > works >> > for now! >> > My apology for being long winded. This is my first post and I have to >> > describe the problem as best as I can remember. I would very much >> > appreciate >> > any helpful suggestions to fix the problem. >> > >> > >> > >> > -- >> > Hoa >> > leth5591<removethis>@gmail.com >> > >> > >> > >> >> > >
- Next message: Michael Solomon \(MS-MVP Windows Shell/User\): "Re: Another user"
- Previous message: Dave: "Unable to access most if not all windows programes"
- In reply to: Hoa: "Re: XP HOME BOOT FAILURE"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
