Re: VPN tunnel with XP Home on remote end can't connect to server in App Mode
- From: "Vera Noest [MVP]" <vera.noest@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Thu, 01 Jun 2006 14:21:23 -0700
No, your ping test shows that the MTU size is not the problem.
I'm beginning to get stumped, I must say.
How about the permissions on the MSLicensing key? Can you confirm
that the problem also exists when you login as local Administrator
on the clients?
And which OS is your TS and your LS running?
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
jheinzel@xxxxxxxxx wrote on 01 jun 2006 in
microsoft.public.win2000.termserv.clients:
I did upgrade the firmware. I have tested for the MTU size,.
results are as follows:
Pinging 172.16.100.20 with 1472 bytes of data:
Reply from 172.16.100.20: bytes=1472 time=159ms TTL=58
Reply from 172.16.100.20: bytes=1472 time=630ms TTL=58
Reply from 172.16.100.20: bytes=1472 time=158ms TTL=58
Reply from 172.16.100.20: bytes=1472 time=162ms TTL=58
Ping statistics for 172.16.100.20:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 158ms, Maximum = 630ms, Average = 277ms
It was only Home machines, but now I found a Pro machine doing
something similar, but not the exact some thing. I can't connect
via ICA or RDP with it or the home machines. But at the same
location I have other machines that can connect via ICA (Pro
machines).
They were connected previously via the VPN client before the
Linksys was put in and a tunnel setup.
MTU is disabled on the Linksys I'm not sure about the SMC (Cable
Modem/router), but since I can pass the 1472 packets but nothing
higher, do I need to enable and increase it?
Vera Noest [MVP] wrote:
Pro? I thought we were talking about Home edition?
Have you done the ping test to check if there is a problem with
the MTU size?
Have you checked if there is a firmware update for your LinkSys
router? I know that some versions of the firmware contained a
problem with UPnP, which caused data encryption errors, making
an rdp connection impossible.
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
jheinzel@xxxxxxxxx wrote on 31 maj 2006 in
microsoft.public.win2000.termserv.clients:
I'm looking at my Terminal Services Licenses and I see the
desktops listed under Temporary Licenses and then the Pro
machine that won't connect under Existing and Temporary. I
can't for the life of me figure out why these won't connect.
Vera Noest [MVP] wrote:
OK, so that confirms that it is a licensing issue.
First of all, please check in the TS Licensing Manager that
you have free *purchased* TS CALs available. The fact that
other clients can connect dosn't necessarily means that you
have a free license avialable for this client.
Assuming that you do have a free license available, there
are a couple of reasons why it can't be transfered to this
client:
1. the user doesn't have at least Full Control permission to
the registry key on the client which stores the license,
which is: HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
2. there might be a black hole router between your client
and the TS, which blocks packets above a certain size. This
prevents the transfer of the permanent TS CAL to the client
(on first connection, the client gets a temporary license,
on second connection, it gets a permanent license).
If this is the problem, you have to change the MTU size.
Check the Terminal Services FAQ, there are 2 items about
this under "Connectivity"
http://www.microsoft.com/windowsserver2003/community/centers/
ter min al/terminal_faq.asp
_________________________________________________________
Vera Noest
MCSE, CCEA, Microsoft MVP - Terminal Server
TS troubleshooting: http://ts.veranoest.net
___ please respond in newsgroup, NOT by private email ___
jheinzel@xxxxxxxxx wrote on 30 maj 2006 in
microsoft.public.win2000.termserv.clients:
Yes I get error 1004 on the Citrix Servers.
Event Type: Warning
Event Source: TermService
Event Category: None
Event ID: 1004
Date: 5/30/2006
Time: 2:28:02 PM
User: N/A
Computer: TC-CITRIX2
Description:
The terminal server cannot issue a client license.
It will not connect via the RPD client either. I am
running the latest version of botht he Citrix ICA client
and RDP client. I can connect to other servers, just not
the ones that require a TSCAL. I've tried setting up a
LMHOST file for my domain controller and that didn't seem
to work either.
- Follow-Ups:
- References:
- Prev by Date: Re: VPN tunnel with XP Home on remote end can't connect to server in App Mode
- Next by Date: need terminal server expert for printer redirect problem
- Previous by thread: Re: VPN tunnel with XP Home on remote end can't connect to server in App Mode
- Next by thread: Re: VPN tunnel with XP Home on remote end can't connect to server in App Mode
- Index(es):
Relevant Pages
|
