RE: Win2000 Upgrade to SP3 Express Setup error.

From: Luger (anonymous_at_discussions.microsoft.com)
Date: 05/31/04


Date: Mon, 31 May 2004 16:47:18 -0700

Hi Subbu,

Thanks again for following up. I will do what you suggest.

I am almost 100% sure the disk is fine, but anywy, I will
run the diagnost tools included as part of the Maxtor Disk
with Ultra ATA/100 drive and I am able to access in DOS
mode, one of the partitions.

Regards

Luger

PS The partitions were handled with partition magic
software. Do you thin it would have something to do with
the problem?
>-----Original Message-----
>Hi
>Edit the boot file with following option
>{ multi(0) disk(0) rdisk(1) partition(1) \winnt }
>Note: change in rdisk
>
>Use some hardware diagnostic tools (which work at bios
level) to confirm
>that hard drive is working fine. ( You may get it from
OEM )
>You can connect this hard drive to some other system as
secondary and
>confirm for working fine
>
>
>
>
>
>Subbu
>This posting is provided "AS IS" with no warranties, and
confers no rights.
>
>.
>



Relevant Pages

  • LVM on SW RAID for sarge - success
    ... I've just had success migrating Debian Sarge to root on LVM on RAID. ... First make sure the SCSI BIOS boots from the first disk. ... I made reiserfs on all the filesystem partitions and completed the ... The remaining two disks were partitioned and used to create RAID arrays ...
    (Debian-User)
  • Re: Replace SCSI Drive
    ... from there you can manipulate other hard drives attached to the machine. ... It should 'just work' but watch out that you keep disk devices ... vi-a) Write a BSD partition table into the slice, then set up your required FreeBSD partitions: ... items under the 'Custom Install' to achieve the desired result. ...
    (freebsd-questions)
  • Re: RAMDisk and HardDisk strikes back!
    ... One disk with only one partition as large as FBA setup; ... Two disk with one or more partitions for each. ... @ 20:32:55.252 #W059 Selecting best compatible driver failed. ... @ 20:53:51.166 #T211 Install Device: Changing registry settings as specified ...
    (microsoft.public.windowsxp.embedded)
  • Re: backups & cloning
    ... dump unmounted file systems to the system's tape drive. ... The restore program, on the other side of the | pipe, does ... Here's an example (ad1 is source disk, ... Use dump only on unmounted partitions. ...
    (freebsd-questions)
  • Software RAID partitions not detected at boot time with linux 2.6.25.1.
    ... In my previous bug repor, I was using raid1; now, I am using raid5, as ... device sdc2 operational as raid disk 2 ... The last line shows my raid partitions are detected. ...
    (Linux-Kernel)