I am trying to install W2k Advanced Server + SP4 to a industrial server.
This server uses adaptec scsi card, whereby channel A is connected to
local
harddisks raid1 (C:\) while channel B is connect to external cluster
storage.
When I first install W2k Advanced Server without service pack4, reboot
with
channel B connected to cluster and there's no problem. But after I
install
SP4 it took about 20-35 min to startup the operating system. It's still
taking so longer after i reinstall the SCSI & hostraid driver.
[PATCH] 2.6.22 - Documentation Cleanup ... To allow flexibilty for each cpu type and board, ...dma code can be given an dma ordering structure which ... allows the order of channel search to be specified, ... like above are usually useful in midlayer driver (e.g. libata core ... (Linux-Kernel)
Re: Are hardware vendors starting to bail on FreeBSD ... ? ...open source driver with: ``Piss off! ... The problem here is that Adaptec is thinking that they have a right to ... their all-in-one products, that only run under the Windows OS, lots of those ... buy jar rings and seals for 30 - 40 year old Mason jars.... (freebsd-questions)
[PATCH][RFC] Remove "obsolete" digiepca content. ... -NOTE: This driver is obsolete. ... In other words a PCI card in slot 3 will always have higher device ... This structure is NOT used to overlay the cards physical channel... -static void globalwinon; ... (Linux-Kernel)
[PATCH] DIGIEPCA: Remove long-obsolete digiepca driver. ... -NOTE: This driver is obsolete. ... In other words a PCI card in slot 3 will always have higher device ... This structure is NOT used to overlay the cards physical channel... -static void globalwinon; ... (Linux-Kernel)
