Re: Win 2K install reboots, starts over during setup - now says ntldr missing

anonymous_at_discussions.microsoft.com
Date: 07/25/04


Date: Sun, 25 Jul 2004 14:21:00 -0700

Are you referring to the Promise controller card? It is
not installed. Otherwise, I am unsure which controller
it's got and I don't have any driver disks for it.

I should install the promise card then? I saw this
response and thought it might solve the problem before but
had the same questions I do now about the Promise card.
The MB is and Asus 450mhz, PII.

thx

>-----Original Message-----
>You didn't mention the current drive controller (possibly
SCSI, or ultra
>DMA, or ATA100, or raid, or serial ATA), but you may need
to boot the
>Windows 2000 setup disks or CD-Rom and *F6* very early
and very important
>(at setup is inspecting your system) in the setup to
prevent drive
>controller detection, and select S to specify additional
drivers. Then later
>you'll be prompted to insert the manufacturer supplied
Windows 2000 driver
>for your drive's controller in drive "A"
>
>If you wait and then S to specify additional drivers,
then it may be too
>late as Windows 2000 Setup at this point may have already
assigned the
>resources your drive's controller is wanting to use.
>
>--
>Regards,
>
>Dave Patrick ....Please no email replies - reply in
newsgroup.
>Microsoft Certified Professional
>Microsoft MVP [Windows]
>http://www.microsoft.com/protect
>
>"Frogabog" wrote:
>| I installed an 80g hard drive after the original 13g
>| failed. It wouldn't recognize any of the HD so I
bought a
>| controller card (Promise) but that didn't work either.
So
>| I flashed the BIOS and viola it found the HD slick as
can
>| be. Thought my problems were over. Not so. During
>| various phases of windows setup it reboots. I have re-
>| formatted the HD 3 times trying to make sure it's a very
>| clean install. Once it rebooted at 100% of the HD
format
>| and then said I didn't have a formatted HD. There was a
>| point where I got through setup and to the final phase
>| after entering the registration numbers and then it
>| reboots during the second task in the last phase of the
>| install (can't remember what it is, right before it
>| deletes temporary files). At one point it would go
right
>| back to setup installing devices, then asking my name,
>| enter the numbers and again reboots during the last few
>| tasks. Now it reboots during the first phase of the
>| initial setup. Says NTLDR is missing. Like it has part
>| of the install completed but not all.
>|
>| I do not have the Promise card installed anymore. Will
>| this help?
>|
>| And, why when I start over, format the HD again does it
do
>| this? It has always installed without problems, on any
>| machine I've done it on.
>|
>| Any ideas?
>
>
>.
>



Relevant Pages

  • RE: fedora-list Digest, Vol 10, Issue 190
    ... > internal sound card is not recognized. ... > an Adaptec 2410SA Serial ATA RAID controller and a four drive array. ... > install cleanly. ... > I am guessing that I am getting blocked by a closed port. ...
    (Fedora)
  • Re: Win 2K install reboots, starts over during setup - now says ntldr missing
    ... You didn't mention the current drive controller (possibly SCSI, ... Windows 2000 setup disks or CD-Rom and *F6* very early and very important ... | install (can't remember what it is, ...
    (microsoft.public.win2000.setup)
  • Re: Broadcom bcm94321MP - Maybe? How to make it work?
    ... but the card doesn't show up in the device ... If I need to install windows elsewhere and install the ... [Athlon64/Opteron] ... DRAM Controller ...
    (Fedora)
  • Re: Enabling acceleration for WMV-HD
    ... The card is a GeForce 7800 GTX and nVidia was who pointed me to the patch. ... 0.093: KB888656 Setup encountered an error: Setup cannot continue because ... one or more prerequisites required to install KB888656 failed. ... For More details check the Log File ...
    (microsoft.public.windowsmedia)
  • Re: FC3 install on Adaptec 2410SA - Adaptec says NO
    ... My system is a normal Athlon XP 1800 with the same controller as you. ... I tried to install FC3 some times, but only the last clean install and ... > The OS that you are using is not supported by this controller card. ... > on whether or not the installation was successful. ...
    (Fedora)