Re: Disk I/O error 00008020 on install

From: Jason McClellan (jason_mcc_at_obsfucated.myrealbox.com)
Date: 04/29/04


Date: Wed, 28 Apr 2004 22:52:00 -0400

JinLan

I can't speak of that particular error, but before doing anything else I
would suggest you fire up fdisk and delete the existing partitions before
attempting a clean install of windows 2k. There is not any need to use the
MaxBlast software, unless you have an old system that doesn't support the
60G drive. But with an Athlon 1600 XP, your motherboard most likely supports
it. You never know what those freaky special drivers will do to you, at
the best it's got to slow it down some..

Also, double check your hard drive cabling, unplug it all and inspect the
connectors carefully and make sure there are no bent pins. I have seen
systems with a crushed pin from where the drive cable was forced in act fine
until you try to install something.

"JinLan" <anonymous@discussions.microsoft.com> wrote in message
news:295201c42828$073fef90$a301280a@phx.gbl...
> I'm trying to install Win2K from the installation Cd on an
> Athlon 1600 XP System I've put together with a Maxtor
> DiamondMax Plus 9 60GB HDD. The HDD is jumpered as Primary
> Master and formatted via MaxBlast3 for Win2K. The CD-ROM
> drive shows up as Secondary Slave when the machine is
> powered on.
>
> As soon as Win2K starts to load from the CD, I get the
> Disk I/O error 00008020 with the message, "Failed to
> arcread the boot partition to check for a signature."
>
> I'm not sure whether I've got a cabling/hardware
> configuration problem or what, but this is the last time
> I'll try to build my own system. At least not without
> documentation.
>
> P.S. I've checked the KB and I've seen a similar problem
> with an 00008001 error with a ZIP drive, but I don't have
> one.
>



Relevant Pages

  • Re: [opensuse] complex confusing partition problem
    ... Another install you forgot about, ... only one 10.2 was installed on hdb. ... the hdb disk and renamed it sdc. ... One thing that helps is to have all partitions "labeled". ...
    (SuSE)
  • Re: (2nd) HDD Format & Setup Suggestions Please
    ... Backup - use the built in Windows Backup utility. ... 'normal' setup (sometimes getting rid of Linux partitions, ... Beware of some crappy apps that install databases in the ... >> would have considered SATA disc drives on a low cost SATA RAID controller ...
    (microsoft.public.windowsxp.hardware)
  • RE: FC2 Frist boot after clean Install
    ... Always a COMPLETELY clean install – using Drive Image utility to erase ... all partitions and restore MBR. ... I compared the grub.conf files on each machine after the FC2 install. ... different Asus model motherboards and different hard drives (Seagates & ...
    (Fedora)
  • Re: Problem after converting FDisk Partitions to LVM
    ... The issue I was reporting about was, that my 2 freshly installed W4.0 partitions didn't boot up anymore, after the eCS beta was installed and changed FDisk to LVM in the process. ... I wasn't trying to migrate an existing, over time matured W4 system to eCS, rather than trying to learn about the shortcomings of the latest FDisk and potential dangers in possibly switching my W4 FP16+ box to LVM, in order to install and boot additional OS' from HDD areas beyond FDisk's limited abilities. ...
    (comp.os.os2.setup.storage)
  • Re: Trying to install Linux on a Win XP machine
    ... Trying to install Linux on a Win XP machine ... windows and all the included applications if something goes wrong. ... >> unable to find DOS or superblock or Sun or other partitions. ...
    (comp.os.linux.misc)