Re: Can not see my own websites after setting up routing

No, the DNS works fine. I can do everything I need to from an outside
machine and if I ping www.thenoc.us from the inside, I get a response on the
public IP address. This is turn is passed through win2003-2 using Routing
via NAT/Firewall. There is a port forward on port 80 forwarding all data to
win2003-3, which is the webserver.

This issues seems to only happen on my internal network. The machine I am
working from is on the same Class C subnet as all the servers.

Matt




"Robert L [MVP - Networking]" <noreply@xxxxxxxxxxx> wrote in message
news:%239yfI1D$GHA.4376@xxxxxxxxxxxxxxxxxxxxxxx
If I understand your post correctly, you have a DNS issue. This search
result may help,

Troubleshooting DNS Why I can't perform external name resolution to the root
hint servers on the Internet. Why our web site doesn't work internally ...
www.chicagotech.net/dnstroubleshooting.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"Matthew Mandalek" <matt@xxxxxxxxx> wrote in message
news:%23BpQklD$GHA.3584@xxxxxxxxxxxxxxxxxxxxxxx
I have setup counting on Machine1. It is connected directly to the
Internet
as well as my local network.

I have websites setup on Machine2 on my local network and am routing all
traffic from Machine1 port 80 to it.

I have another server on my local network, Machine3 that I use as a
workstation.

When i attempt to connect to my website from Machine3
(http://www.domain.tld) I get the "Page can not be displyed". But, when I
connect from a machine out on the Internet, it works fine.

What have I done wrong?

Thanks

Matt
matt@xxxxxxxxx



.

Relevant Pages

  • Re: The OTHER problem with Netgear WGT624 (and probably others)
    ... I wonder where YOUR DNS ... | redirects routerlogin.com to the setup wizard. ... Only if you already have the router set up. ... The router wasn't serving internet access. ...
    (alt.internet.wireless)
  • Re: IIS SMTP server not sending. Mail stuck in Queue
    ... >I just setup a W2K server with these setup, Domain controller, AD, ... >Internet connection software. ... and setup my ISP's DNS IPs on the Forwarder tab. ... >Relay from all my NICs IPs. ...
    (microsoft.public.inetserver.iis.smtp_nntp)
  • Re: External DNS Lookups Failing - DEPRESSED!
    ... your internal and external NICs cannot be in the same subnet. ... Note that the DNS value for the external NIC is set to the IP address of the ... See the following diagrams for setup (select the one that fits your network ... IP values per the diagrams and then run CEICW (Connect to the Internet) to ...
    (microsoft.public.windows.server.sbs)
  • IIS SMTP server not sending. Mail stuck in Queue
    ... I just setup a W2K server with these setup, Domain controller, AD, ... Internet connection software. ... server, I have the last part on the domain as ".local". ... and setup my ISP's DNS IPs on the Forwarder tab. ...
    (microsoft.public.inetserver.iis.smtp_nntp)
  • Re: Windows Server 2003 DNS & Active Directory Installation?
    ... I like to differentiate between the internet namespace and the local ... For your A/D setup - I would use joseta.local rather than joseta.com - ... forwarders on the dns server to query your isp's dns server for "All ... Guide to setting up A/D - and forwarders for Internet DNS Queries ...
    (microsoft.public.windows.server.general)