Re: Setting up a VPN Gateway on a Win2K server

The ip addresses on the LAN are 204.193.x.x, so they are different.
The mask on the LAN is 255.255.255.0, again different. Where on the
server can I route the two subnets?

Thanks in advance,
Tim

.

Relevant Pages

  • Routing between VLANs on a baystack 450-24T
    ... If we set up two vlans on a single baystack 450, ... set to "route" between the two subnets? ... Prev by Date: ...
    (comp.dcom.sys.nortel)
  • Re: DHCP and routing across subnets
    ... > You cannot fix this problem by changing things in DHCP or on the RRAS ... > (ie the router option in DHCP should be to the DSL router). ... > subnets access to the Internet. ... > static route to each DSL router to redirect the local traffic to the RRAS ...
    (microsoft.public.windows.server.networking)
  • Re: Quick Routing Question
    ... >> routing to the outside world from both subnets. ... > What you need to do, is set a static route inside the Linksys that ... > The Linksys may try to give up searching for the 10 network because the ... > only addresses it knows how to route through the LAN side will be the ...
    (freebsd-questions)
  • Re: Seriously confused about linux routing
    ... trying to route traffic originating at 10.10.0.0/16 and direct it to ... computers on the other subnets, however, I'm having problems with the ... Now I'm trying to configure iptables to allow me to use these machines ...
    (comp.os.linux.networking)
  • Re: Summary Route Question
    ... several BVIs that have IP addresses for my internal subnets. ... route that points to my firewall for Internet connectivity. ... installed that connects to their network. ...
    (comp.dcom.sys.cisco)