Re: Urgent VPN Server with l2tp/ipsec help!

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Authentication settings can be done at 2 places on the server, RAS Server
propeties and Remote Access Policies. On the client you can set the
authentication and encryption type on the connectoid by going to the
connectoid properties -> Security tab -> Advanced settings. Make sure your
encryption type on the client matches with the encryption type of the Remote
Access policy on the RAS server and Authentication type on client matches
with Auth type selected on the RAS server properties and Remote Access
Policy.

--
Thanks,
Puja
---------------------------------------------------------
This posting is provided "AS IS" with no warranties, and confers no rights.
"chris" <chris@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:FA0FC711-D8A5-4229-82BF-234D36DE3893@xxxxxxxxxxxxxxxx
> Not when its on a DMZ port. Its directly available through the public
> without NAT.
>
> "mike menard" wrote:
>
>> do you have a firewall or other nat device in 'front' of you rras server?
>>
>> "chris" <chris@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:74C02145-37B0-43D7-A603-CAF34BB36EBB@xxxxxxxxxxxxxxxx
>> >I have a 2003 std server configured with RAS on a DMZ port. I'm trying
>> >to
>> > secure my vpn since were using pptp without any problems. I have a CA
>> > server
>> > and obtain certificates on both end with preshare key. Client is Winxp
>> > sp2
>> > and I followed the step by step instructions and not sure where to go
>> > next.
>> > The error I'm getting is 741 "local computer does not support the
>> > required
>> > data encryption type". If I set the server authentication method to
>> > none,
>> > then it connects. I'm sure its my authentication settings. Please
>> > help
>> > since I'm stuck with this problem for a week now... Thanks in advance!
>>
>>
>>


.

Relevant Pages

  • Re: RAS VPN client routing problem
    ... it sets up the correct route. ... from the RRAS server as part of the PPP transaction. ... the remote client can get further info from ... >>> I have a Windows 2003 RAS server configured for VPN. ...
    (microsoft.public.windows.server.networking)
  • RAS VPN client routing problem
    ... I have a Windows 2003 RAS server configured for VPN. ... Recently I moved an application server into a subnet and now VPN ... When a Win XP VPN client first connects to the RAS server, ...
    (microsoft.public.windows.server.networking)
  • Re: L2TP/IPSEC - error 678
    ... Do the clients actually have the CS trust certificate ... for the issuing (to the RRAS server) server, ... Smartcard for EAP-TLS but could be in the client ... tested> with the client and RAS server on the same subnet...as well as> opening all traffic to/from the RAS server from another known public IP. ...
    (microsoft.public.win2000.ras_routing)
  • Re: RAS VPN client routing problem
    ... > I have a Windows 2003 RAS server configured for VPN. ... > get client IP addresses from a DHCP serve. ... The app server has IP address 172.16.201.170 ...
    (microsoft.public.windows.server.networking)
  • Re: What doesnt lend itself to OO?
    ... >> proxy and instructs the server to constuct the real object. ... rather than client code. ... If 'clock' is instantiated in the server, ... > for the server interface at the OOA level. ...
    (comp.object)