Re: remote User VPN Disconnects

No, the users and I both have our "Idle time before connecting" set to
"never". I can connect to my other office with the same settings and be
connected for days, it I chose to. Hopefully someone else can offer other
suggestions. Thanks.

_ GJ

"Robert L [MS-MVP]" wrote:

> it could be the Idle time before hanging up of the client connection settings. quoted from http://www.HowToNetworking.com
>
> How to configure VPN or Dial-up options
>
> 1. Open Network and Dial-up Connections
>
> 2. Right-click the dial-up connection you want to configure, and then click Properties.
>
> 3. On the Options tab, in Redial attempts, click the arrows to set the number of times the dial-up connection is automatically redialed if the first attempt to connect fails.
>
> 4. In Time between redial attempts, click the arrows to set the amount of time to pause between the end of one attempt and the beginning of another.
>
> 5. In Idle time before hanging up, click the arrows to set the amount of idle time before a client hangs up a connection.
>
> 6. If you want the connection to automatically redial if the line is dropped, select the Redial if line is dropped check box.
>
>
> Don't send e-mail or reply to me except you need consulting services. Posting on MS newsgroup will benefit all readers and you may get more help.
>
> Bob Lin, MS-MVP, MCSE & CNE
> How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
> Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
> This posting is provided "AS IS" with no warranties.
>
> "GJ" <geejay@xxxxxxxxxxxxxxxx> wrote in message news:8948DDA8-8A2D-4E9F-9A32-F7B120C37811@xxxxxxxxxxxxxxxx
>
> I have a Windows 2000 RRAS configured for user remote access. Users can
> connect and navigate the network without a problem. The issue is that they
> are disconnected (whether they are idle or not) after about 60 minutes. The
> logs say that the disconnection was "user requested". I have another RRAS
> server running on Windows 2003 and the same users do not have this problem.
> The "Idle time before hanging up" properties for the connection are set to
> "never". Does anyone have any suggestions as to what the problem may be?
> Thanks in advance.
> --
> GJ
.

Relevant Pages

  • Re: remote User VPN Disconnects
    ... It might also happen due to a setting on your server. ... Check in the remote ... the users and I both have our "Idle time before connecting" set to ... >> number of times the dial-up connection is automatically redialed if the ...
    (microsoft.public.win2000.ras_routing)
  • Re: Sockets in C on Linux
    ... TCP_KEEPALIVE is a relatively new POSIX option, ... a heartbeat mechanism to make sure the connection is good, ... otherwise idle time. ... not useful to applications, the TCP stack sends a message, the peer ...
    (comp.programming)
  • Follow-up - Windows XP Pro - share - need advice
    ... the connection with the Share drive. ... I changed the NIC setup to be sure it doesn't turn off. ... the idle time as I don't know exactly how much time to give them. ... I can't find that message anynmore, ...
    (microsoft.public.windowsxp.general)
  • Re: stop connection with 2k server
    ... Can you check if you have set the 'Idle time before hanging up' on your ... You can check this by - Open the 'Network Connection' folder -> Right Click ... note that the server also has a disconnect timer and if that is ...
    (microsoft.public.win2000.networking)
  • ISA Server Not hanging the on-demand dialout connection
    ... ISA is not droping or hanging the connection after the clients are done or ... in case the connection is idle. ... I have also set a idle time to disconnect /hangout and it is 5 mins but not ... at all hanging the connection. ...
    (microsoft.public.isa)